PLC Programming Cables, USB-to-Serial Converters & Industrial Communication Interfaces

Industrial serial communication and programming cable solutions for PLC commissioning, controller service, automation equipment, instruments, barcode systems, POS peripherals, data acquisition and legacy serial devices. This collection includes USB-to-RS232 DB9 cables, FTDI-based converter cables, USB-to-RS485 / RS422 / TTL interfaces, RS232-to-RS485 / RS422 converters, dual-port serial adapters, right-angle DB9 assemblies, USB-to-HID keyboard converter cables and application-specific serial interface leads.

Choose by the complete host-to-device communication requirement: PLC or equipment brand and model, original programming-cable reference, computer-side USB interface, controller-side port type, connector gender, exact pinout, electrical interface standard, required active conversion function, software or driver requirement, communication settings, cable length and installation environment. A USB plug, DB9 connector or terminal block alone does not establish universal PLC programming compatibility.

Selection note: PLC programming ports are often controller-specific. Two cables may both use USB and DB9 connectors while differing in chipset, pin assignment, RS232 / RS485 / RS422 / TTL electrical interface, handshaking signals, connector gender, driver support and software compatibility. Confirm the controller documentation, original cable reference and both mating interfaces before ordering. A passive USB or DB9 cable does not convert serial standards, create a virtual COM port, isolate a bus, change a protocol or make incompatible programming software communicate with a controller.
  • USB-A USB-C To Dual DB9 Serial Cable
    USB-A/USB-C to Dual DB9 Serial Cable: Featuring a 2-in-1 design, this cable is compatible with multiple device interfaces, supports stable communication, and is ideal for industrial control and data
  • USB To Dual DB9 RS232 Serial Cable
    This USB-to-Dual DB9 RS232 Serial Cable features a 2-in-1 design, enabling the simultaneous connection of two serial devices. It ensures stable data transmission and is suitable for industrial
  • USB To DB9 45 Degree Serial Cable With Screws
    This 45-degree USB-to-DB9 serial cable features a screw-locking design that ensures a secure, stable connection free from loosening. Its space-saving profile makes it ideal for use with industrial
  • USB-RS232-WE-1800 Converter Cable
    An original FTDI USB-to-RS232 serial converter cable, featuring the FT232R chip. One end terminates in a USB-A male connector, while the other features a 6-pin open-ended cable with tinned leads. It
  • Serial To HID Keyboard Converter Cable
    This USB-to-DB9 Female HID Keyboard Converter Cable, powered by the CH9328 chip, converts RS232 serial data into keyboard input, making it suitable for use with POS systems, medical equipment, and
  • USB To DB9 HID Keyboard Cable
    The USB-to-DB9 HID Keyboard Cable features a built-in CH9328 chip, which converts USB signals into RS232 serial communications while emulating a USB HID keyboard device. Data transmitted through the
  • USB To RS232 Adaptor Cable UT232R-200
    The USB-to-RS232 Adapter Cable is an adapter cable featuring a built-in FT232R chip. It is designed for connecting legacy RS232 devices to modern USB ports and is widely used in applications such as
  • FTDI USB To RS232 Serial Cable Chipi-X10
    The FTDI Chipi-X10 USB-to-RS232 Serial Cable features a built-in high-performance chip, ensuring stable and reliable transmission. It is plug-and-play compatible and suitable for industrial
  • USB To RS232 RS485 TTL Converter Cable
    This USB-to-RS232/RS485/TTL converter cable supports multi-protocol communication, offers stable transmission with strong anti-interference capabilities, and features plug-and-play functionality,
  • USB To RS485 RS422 Converter Adapter
    USB-to-RS485/RS422 Conversion Adapter: Supports stable communication and long-distance transmission, features strong anti-interference capabilities, and is plug-and-play—ideal for industrial control
  • USB To RS485 RS422 FDTI Converter
    This USB-to-RS485/RS422 Serial Converter supports dual-protocol communication, offers stable transmission with strong anti-interference capabilities, and features plug-and-play functionality, making
  • RS232 To RS485 R422 FTDI Cable
    RS232-to-RS485/RS422 FTDI Cable: Featuring a built-in high-performance chip, this cable supports stable communication and long-distance transmission. It is plug-and-play compatible, making it ideal
First 123456 Last

How to Select the Right PLC Programming or Industrial Serial Cable

PLC and industrial serial cable selection is an end-to-end communications check. This collection includes USB-to-RS232 converter cables, RS232 / RS485 / RS422 / TTL conversion interfaces, dual-port serial adapters, HID keyboard converter cables and equipment-specific service assemblies. The correct product must match the host computer, controller or device port, electrical interface, pinout, required active electronics and intended application software.

Application Typical Cable or Converter Role Confirm Before Ordering
PLC programming, commissioning or service Active USB-to-serial cable or controller-specific interface used to connect a computer running approved programming or diagnostic software to a compatible PLC or automation device. PLC brand/model, software requirement, original cable number, host USB type, controller port, connector gender, exact pinout, chipset / driver support and communication settings.
Legacy RS232 device connection USB-to-DB9 or USB-to-open-end RS232 converter cable linking a modern computer to a serial device such as a controller, instrument, modem, scanner, printer or service interface. DB9 male / female requirement, DTE/DCE or null-modem wiring where applicable, handshaking signals, cable pinout, driver support, operating system and attached-device serial settings.
RS485 / RS422 field device or instrument network USB or RS232 converter interface used to connect a host computer or controller to a specified differential serial system, terminal block, open-wire lead or field device bus. Required interface standard, 2-wire or 4-wire arrangement, A/B or TX/RX signal mapping, connector/terminal format, isolation need, termination arrangement, baud rate and device documentation.
Dual-port, HID or specialty serial workflow Two-channel serial adapter or a device-specific converter that presents received serial data to a host in a defined function such as keyboard-style input. Number of serial channels, host-side behavior, active IC function, data format, connector orientation, device protocol, programming or POS software requirement and expected operating workflow.

Common Serial Cable Formats in This Collection

USB to RS232 / DB9 Active Converter Cables

Used when a computer needs an active serial interface for a compatible RS232 device. Check the DB9 gender, cable wiring, chipset, driver support, operating system and controller-side port. A DB9 connector does not by itself confirm RS232 pinout, null-modem wiring or PLC-programming compatibility.

RS232 / RS485 / RS422 / TTL Conversion Interfaces

Used where the host and device use different specified serial electrical interfaces. These are active converter products and should be chosen by the real signal standard, wiring topology, terminal arrangement, device settings and software requirement. Do not treat a passive cable as a replacement for an active protocol or electrical-interface converter.

Dual-Port, Right-Angle & HID Converter Assemblies

Used for dual-device connection, compact cabinet routing or a defined serial-data-to-host-input workflow. Confirm that the product’s active function matches the actual software and device behavior; a second DB9 port, angled connector or HID label does not make every industrial serial application compatible.

Connector shape is not the same as communication compatibility. A DB9 connector can be used for RS232, RS485, RS422, CAN, proprietary controller wiring or another defined signal assignment. USB-to-serial cables also vary by converter IC, driver behavior and output wiring. For a PLC application, verify the intended controller model, programming software, port standard, cable pinout and required converter function before connection.

Information Needed for a Custom PLC or Serial Communication Cable

For a compatible programming or serial cable assembly, provide as much of the following information as possible:

PLC, controller, instrument or peripheral brand and model Programming software, application and original cable / part number Host computer interface and operating-system requirement Photos of both mating interfaces, labels and connector sides RS232, RS485, RS422, TTL or other specified electrical interface Connector gender, pinout, handshaking lines and terminal labels Required active IC / conversion function and expected host behavior Communication settings, cable length, outlet direction and installation route

FAQ

Can any USB-to-DB9 cable program a PLC?

No. A PLC programming cable must match the controller port, electrical interface, pinout, connector gender, active converter requirement and the programming software. A generic USB-to-DB9 cable may not have the correct wiring or driver behavior for a particular PLC.

What is the difference between RS232, RS485 and RS422?

They are different serial electrical-interface standards. They use different signal arrangements and are not interchangeable by connector shape. Select the converter or cable according to the actual host and device interface, topology and wiring documentation.

Does a USB-to-RS232 cable need a driver?

Driver needs depend on the converter chipset, host operating system and product design. Confirm the individual cable specification and the target computer environment before using it for commissioning or programming work.

Can a passive DB9 adapter convert RS232 to RS485 or RS422?

No. Converting between these electrical interfaces requires an appropriate active converter. A passive gender changer, straight-through cable or pin adapter can only route the conductors that are already present; it does not perform electrical-interface conversion.

How do I request a compatibility review or custom serial cable?

Send the controller or device details, original cable reference, programming software name, connector photos, pinout or wiring diagram, host operating-system information and desired cable length. Contact us for a compatibility review.

PCM Cable Co., Ltd. is one of the leading rs232 rs485 rs422 serial cable manufacturers and suppliers in China. We warmly welcome you to buy advanced rs232 rs485 rs422 serial cable in stock here from our factory. All customized products are with high quality and low price. Contact us for quotation and free sample.

Send Inquiry