Waterproof FAKRA Automotive Coaxial Cable

Configurable FAKRA and SMA Connections

FAKRA Male / FAKRA Female → FAKRA Male / FAKRA Female / SMA Male / SMA Female

This cable series supports multiple automotive coaxial interface combinations within one product family. Waterproof straight FAKRA connectors can be paired in male-to-female, male-to-male or female-to-female layouts, while FAKRA-to-SMA versions provide an alternative interface for RF modules, antennas and test equipment.

Different connector pairings and cable lengths can be selected to suit installation position, mating interface and routing requirements. Important: connector gender and interface type should be confirmed against the mating device before ordering, as FAKRA and SMA configurations are intended for different connection environments.

11 Connector Configurations

Automotive Connectivity Applications

Product Features

Product Advantages

1. Easy Matching

A broad choice of connector pairings helps buyers select the required interface without adding unnecessary adapters to the installation.

2. Space Efficient

Compact connector configurations support installation around modules, panels and harness areas where available mounting space may be limited.

3. Fewer Transitions

Direct FAKRA to FAKRA or FAKRA to SMA assemblies reduce extra connection points between vehicle components and RF equipment.

4. Project Flexibility

Multiple interface and length choices make the cable family easier to specify across prototypes, replacement wiring and customized automotive projects.

Connector & Length Quick Comparison

Need a different interface or cable length? Connector combinations and cable dimensions can be configured to match your project requirements.

How to Select the Right Cable?

Choosing the correct assembly depends on where the cable is installed and what interfaces are present on the equipment. Check the installation position and mating connectors before selecting a configuration.

1. Identify the Installation Side
Determine which end is located in the exposed or protected area of the vehicle so the waterproof FAKRA interface is positioned correctly.

2. Check the Mating Connector
Inspect the connector fitted to the antenna, camera, ECU or RF module. The cable-side gender must match the actual equipment interface.

3. Verify FAKRA or SMA
Confirm whether the device side uses a standard FAKRA connection or an SMA interface. This prevents unnecessary adapters and additional connection points.

4. Check Routing Distance
Measure the actual cable path rather than the straight-line distance between devices. Allow sufficient length for bends, clips and harness routing.

5. Confirm Before Production
For unfamiliar interfaces, provide connector photos, equipment details or an existing cable sample so the required configuration can be checked before production.

Installation Side + Mating Interface + Routing Length = Suitable Cable Configuration

Product FAQ

1. Can this cable replace an existing vehicle coaxial cable?

Yes, when the connector interfaces, gender and installation requirements match the original cable. For replacement projects, checking the original connector or cable sample is recommended.

2. Does the connector color affect compatibility?

Yes. FAKRA housings use mechanical coding to prevent incorrect mating. The required coding should be confirmed from the vehicle equipment rather than selected by appearance alone.

3. Can different FAKRA codes be supplied?

Connector coding can be configured according to project requirements and component availability. Please specify the required FAKRA code when requesting a quotation.

4. Can the cable construction be changed for an OEM project?

Yes. Cable type, connector combination, length and related assembly details can be evaluated according to the electrical and installation requirements of the project.

5. What information should I provide for a custom quotation?

Provide the connector type at both ends, FAKRA coding if applicable, required length, quantity and available drawings or interface photos.

6. Can samples be supplied before a production order?

Sample requirements can be discussed for connector fit, cable routing and assembly evaluation before moving to larger-volume production.