China Automotive Ethernet Cable Manufacturers Suppliers Factory - Customized Service

Audio Video Cable
- Audio Cable
- Video Cable
Automotive RF Cables
- FAKRA Cable Assemblies
- Mini FAKRA HFM Cables
Automotive Ethernet Cables
- MATEnet
- GEMNET
- NETBridge
- H-MTD Cable
- Aptiv Cable
- ECT Cable
Automotive High-Speed Cables
- HSC HSL Cables
- HSAutoLink Cables
- HSD Cable Assemblies
- Hirose GT Series Cable
Autonomous Driving Cables
- Automotive LiDAR Cable
Automotive EV Power Harnesses
- Battery Pack Wire Harnesses
- Vehicle Diagnostic OBD2 Cables
- Custom EDU & ECU Cable Assemblies
Brand Custom Cable Assemblies
- JAE Wire Harnesses
- IFM Cable Assemblies
- TE Connectivity Cables
- Molex Cable Assemblies
- Hirose HRS Cable Assemblies
- Aptiv Delphi Automotive Cables
- Deutsch DT Series Cable Assemblies
- JST Cable Assemblies & Wire Harnesses
Custom Wire Harness
- DIN Rail
- Control Panel Wiring Harness
- Telecom & Data Center Cables
- Electrical Enclosure Wire Harness
- Medical Device Cable Assemblies
- Industrial Machinery Wiring Harness
- Robotics & UAV Drone Wire Harness
D-Sub Cable Assemblies
GX Aviation Connector
- GX12 Connector
- GX16 Connector
- GX20 Connector
- GX25 Connector
IP67 IP68 Waterproof Cable
- Rugged Waterproof Connector Cable
- Plastic Waterproof Connector Cable
LED Light Cable Assembly
Mil-Spec Connectors
- PC Series
- OHS Series
- ZH23 Series
- YW Series Connector
- MIL-DTL-5015
- MIL-DTL-26482
- J36B Series Connector
Machine Vision Cable
- USB Industrial Camera Cable
- PoCL Camera Link Cable
- CXP-12 Cable
- GigE Camera Cable
- Keyence Vision Cable
- Cognex Vision Cable
- Camera Trigger Cable
- Datalogic Cable
- Infiniband CX4 Cable
- Active USB High Flex Cable
PoweredUSB Cable
- 12V
- 24V
- 12V To 24V
Panel Mount Cables
- Round Panel Mount Cable
- D-type Panel Mount Cable
- D-type Panel Mount Adapter
- Round Panel Mount Adapter
- Metal Round Panel Mount Cable
- Snap-in Panel Mount Cable
- Screw Lock Panel Mount Cable
- Panel Mount AIuminum
RF Coaxial Cable
- Attenuator
- FAKRA Series
- BNC
- N-Type
- SMA
- TNC
- Mimo
RS232 RS485 RS422 Cable
- USB RS232 Serial Cable
- RS232 485 422 TTL Converter
- Multiport RS232 485 422 Adapter
SPE Cable
SCSI Cable
Sensor & Actuator Cables
- M8 Cables & Assemblies
- M12 Cables & Assemblies
- M16 Cables & Assemblies
- 7/8'' Cables & Assemblies
- M23 Cables & Assemblies
- Field Wireable Connector
- Solenoid Valve Connector
- Feedthrough Panel Connector
XT60 Cable

Premier Cable supplies automotive Ethernet and high-speed vehicle data cable assemblies for in-vehicle networks, ADAS systems, cameras, displays, ECUs, gateways, infotainment systems and development test equipment. Our product range includes H-MTD, MATEnet, HSAutoLink, NETBridge, HSD, HSC, HSL, FAKRA and Mini FAKRA cable assemblies for automotive Ethernet, video, USB, RF and other high-speed data connections.

We support custom cable assemblies based on connector models, reference or OEM part numbers, drawings, pinouts, samples and installation requirements. Available options include connector coding or keying, cable length, shielding structure, wire gauge, straight or right-angle orientation, overmolding, labels and breakout configurations. Specified connector components from Molex, Amphenol, Rosenberger, JAE, Hirose and TE Connectivity can be evaluated according to component availability and project requirements.

H-MTD Automotive Ethernet Cables

For 100BASE-T1, 1000BASE-T1 and selected MultiGBASE-T1 links used in ADAS, domain controllers, zonal architectures and other high-bandwidth vehicle networks.

MATEnet Automotive Ethernet Cables

Compact 100BASE-T1 and 1000BASE-T1 cable assemblies for ECUs, gateways, cameras, radar, LiDAR and in-vehicle Ethernet networks.

HSAutoLink Data & NETBridge Ethernet Cables

HSAutoLink assemblies for USB, LVDS, A2B and selected Ethernet links, together with NETBridge cable solutions for automotive Ethernet connections.

HSD, HSC & HSL High-Speed Data Cables

Shielded high-speed cable assemblies for vehicle cameras, displays, sensors, infotainment systems and electronic control modules.

Related FAKRA & Mini FAKRA RF Cables

Automotive RF and multi-channel coaxial cable solutions for antennas, GNSS, cameras, telematics and communication modules.

Automotive Test & Development Adapters

IX and DB9 adapter cables, media-converter interface cables and breakout assemblies for ECU validation, bench testing and prototype development.

TE 2302461-9 MATEnet Automotive Ethernet Cable
PCM-ZC-0277-X is a 1Gbps automotive Ethernet patch cable using LEONI Dacar 647-4 and TE 2302461-9 MATEnet Plug Z Code connectors at both ends, available in 0.3m and 1m lengths.
ECT 818018737 to Rosenberger IP67 Waterproof FAKRA Cable
PCM-XY-0034-X is a 1m Dacar 302 cable for automotive RF testing. It connects an Original ECT 818018737 quad Mini Fakra jack to four FAKRA jacks with Original Rosenberger 59Z163-003-Z housings.
ECT 818018737 To Rosenberger FAKRA Cable
PCM-XY-0033-X is a 1m Dacar 302 cable for automotive RF routing and bench testing. It pairs an Original ECT 818018737 quad Mini Fakra jack with four FAKRA plugs in Original Rosenberger 59Z176-C01-Z
ECT Quad Mini Fakra To FAKRA Cable
PCM-XY-0032-X is a 1m Dacar 302 breakout cable for automotive RF routing and testing. It pairs an Original ECT 818018737 quad Mini Fakra jack with four Original ECT 818043531 Z Code FAKRA jacks.
ECT Mini Fakra To IP67 Waterproof Fakra Cable
PCM-XY-0031-X is a 1m Dacar 302 cable for automotive RF routing and channel testing. It connects an Original ECT 818018737 quad Mini Fakra jack to four Original ECT 818013084 Z Code FAKRA plugs.
Rosenberger H-MTD Dual Port To Single Port Ethernet Cable
Rosenberger H-MTD Dual Port Female E6K10B-1CAZ5-Z to 2x Single Port Female GG2SPEED 251 10G Automotive Ethernet Fan Out Cable, 0.5 to 6 m, Customizable.
TE GEMnet Single Port To Dacar Ethernet Cable
TE GEMnet Single Port Z Coded Female 1-2368022-4 to Dacar 686-3 10G Automotive Ethernet Crossover Cable, 0.5 to 3 m, Customizable.
TE MATEnet Quad Port To LEONI Dacar Ethernet Cable
TE MATEnet Quad Port A Coded Female 2324319-1 to LEONI Dacar 647-4 Gigabit Automotive Ethernet Harness, 0.5 to 5 m, Customizable.
TE GEMnet Dual Port To LEONI Dacar Automotive Ethernet Cable
TE GEMnet Dual Port Female A Coded 2386612-1 to LEONI Dacar 686-3 10G Automotive Ethernet Harness, 0.5 to 5 m, Customizable.
Rosenberger H-MTD Single Port Female To Female Ethernet Cable
Rosenberger H-MTD Single Port Female to Female E6K10A-1CAZ5-Z to GG2SPEED 251 10G Automotive Ethernet Extension Cable, 1 to 5 m, Customizable.
TE GEMnet Quad Port Automotive Ethernet Cable
TE GEMnet Quad Port Female to Female 2386629-1 to GG251 Dacar 686-3 10G Automotive Ethernet Cable, 0.5 to 5 m, Customizable.
TE MATEnet With Panel Clip To LEONI Dacar Ethernet Cable
TE MATEnet Z Coded Male with Panel Clip 2394145-9 to Dacar 647-4 Gigabit Automotive Ethernet Harness, 0.2 to 5 m, Customizable.

First 12 3 4 5 6 7 Last

Automotive Ethernet and High-Speed Data Connectivity Capabilities

Cable construction is selected according to the required protocol, target data rate, connector interface, shielding structure and vehicle installation environment. Project evaluation may include connector compatibility, cable impedance, shielding continuity, bend requirements, routing space, branch layout and connector orientation.

For high-speed applications, the required protocol and target performance should be confirmed before the connector and cable construction are selected. Supported data rate and signal performance depend on the complete cable assembly design rather than the connector family alone.

Automotive Ethernet and high-speed data cable assemblies for ADAS, vehicle networks and ECU testing

Applications

Typical applications include ADAS camera systems, radar and sensor modules, infotainment systems, digital cockpits, vehicle gateways, zonal controllers, ECU development benches, media converters and automotive Ethernet test equipment.

Customization Options

Available customization options include connector coding or keying, mating interface, contact type, straight or right-angle orientation, cable length, cable jacket material, shielding structure, wire gauge, pin assignment, breakout configuration, overmolding, labels and packaging.

How to Select an Automotive Ethernet or Data Cable

Selection Item	Information to Provide
Connector Requirement	Connector model, reference or OEM part number, coding or keying, mating interface, contact type and required connector orientation.
Application	Vehicle network, ADAS camera, radar, display, infotainment system, ECU, gateway, media converter or test equipment.
Signal and Protocol Requirement	100BASE-T1, 1000BASE-T1, MultiGBASE-T1, USB, LVDS or other SerDes video links, A2B, RF or combined power and data requirements.
Target Performance	Required data rate, impedance, frequency range, insertion loss requirement or other electrical performance criteria.
Cable Requirement	Cable length, shielding requirement, wire gauge, cable jacket material, flexibility, bend radius and routing conditions.
Pinout and Layout	Pin assignment, branch configuration, breakout length, installation space and straight, right-angle or panel-mount requirement.
Reference Material	A drawing, photo, physical sample, existing cable label or connector reference can be used for confirmation.
Quantity	Prototype quantity, sample requirement, initial order quantity and expected annual production volume.

FAQ

Q: Can you make cables based on a reference or OEM part number?

A: Yes. We can evaluate connector and cable compatibility based on the reference part number, drawing, connector coding or physical sample. The final construction is confirmed according to the required interface and project specification.

Q: Do you support H-MTD and MATEnet automotive Ethernet cables?

A: Yes. We offer standard and custom cable assembly configurations for automotive Ethernet applications. Connector coding, cable construction, pinout, required data rate and installation conditions should be confirmed for each project.

Q: Does every H-MTD cable support the same data rate?

A: No. Supported data rate depends on the selected connector components, cable type, assembly length, shielding design and required electrical performance. The target protocol and data rate should be specified before production.

Q: Can the cable be made with right-angle connectors?

A: Yes. Straight, right-angle and panel-mount configurations can be evaluated according to connector availability, mating direction and installation space.

Q: Can you manufacture breakout and test adapter cables?

A: Yes. We can evaluate connector-to-connector, connector-to-open-wire, DB9, IX, media-converter interface and multi-branch breakout assemblies for validation and development equipment.

Q: What information is needed for a quotation?

A: Please provide the connector models or reference part numbers, required protocol, target data rate, cable length, pinout, orientation, shielding requirement, application and quantity. Drawings, photos and samples are also helpful.

Q: Can you support prototypes before volume production?

A: Yes. Prototype, sample and small-batch requirements can be reviewed before volume production according to connector availability and project complexity.

PCM Cable Co., Ltd. is one of the leading automotive ethernet cable manufacturers and suppliers in China. We warmly welcome you to buy advanced automotive ethernet cable in stock here from our factory. All customized products are with high quality and low price. Contact us for quotation and free sample.