RJ45 Female To Dual XLR Male Audio Breakout Cable For Axia

Two XLR Outputs from One RJ45 Audio Interface

The PCM-KW-661 uses a single RJ45 8P8C female connector on one side and two XLR 3-pin male connectors on the breakout side. This configuration provides a compact interface between RJ45-based broadcast audio connections and conventional professional XLR equipment.

The Y-split format is particularly useful where two separate audio connections need to be accessed from one RJ45 audio interface without adding unnecessary cable length.

PROFESSIONAL XLR CONNECTION

Dual 3-Pin XLR Male Connectors for Audio Equipment

Both breakout branches terminate in nickel-plated XLR 3-pin male connectors. The two connectors are separately molded for easy identification and connection to compatible audio equipment.

The cable can be used for point-to-point balanced or unbalanced audio signal connections in compatible broadcast and professional audio installations.

Equipment interface and pin assignment should always be verified before installation.

SPACE-SAVING INSTALLATION

20cm Short Cable for Studio and Rack Equipment

With an overall length of approximately 200mm, PCM-KW-661 is designed for installations where equipment is positioned close together and excessive cable length would create unnecessary clutter.

Typical applications include broadcast consoles, audio processors, signal distribution equipment, radio station wiring, studio racks, recording equipment and professional audio system integration.