China Solenoid Valve Connector Manufacturers Suppliers Factory

Audio Video Cable
- Audio Cable
- Video Cable
Automotive RF Cables
- FAKRA Cable Assemblies
- Mini FAKRA HFM Cables
Automotive Ethernet Cables
- MATEnet
- GEMNET
- NETBridge
- H-MTD Cable
- Aptiv Cable
- ECT Cable
Automotive High-Speed Cables
- HSC HSL Cables
- HSAutoLink Cables
- HSD Cable Assemblies
- Hirose GT Series Cable
Autonomous Driving Cables
- Automotive LiDAR Cable
Automotive EV Power Harnesses
- Battery Pack Wire Harnesses
- Vehicle Diagnostic OBD2 Cables
- Custom EDU & ECU Cable Assemblies
Brand Custom Cable Assemblies
- JAE Wire Harnesses
- IFM Cable Assemblies
- TE Connectivity Cables
- Molex Cable Assemblies
- Hirose HRS Cable Assemblies
- Aptiv Delphi Automotive Cables
- Deutsch DT Series Cable Assemblies
- JST Cable Assemblies & Wire Harnesses
Custom Wire Harness
- DIN Rail
- Control Panel Wiring Harness
- Telecom & Data Center Cables
- Electrical Enclosure Wire Harness
- Medical Device Cable Assemblies
- Industrial Machinery Wiring Harness
- Robotics & UAV Drone Wire Harness
D-Sub Cable Assemblies
GX Aviation Connector
- GX12 Connector
- GX16 Connector
- GX20 Connector
- GX25 Connector
IP67 IP68 Waterproof Cable
- Rugged Waterproof Connector Cable
- Plastic Waterproof Connector Cable
LED Light Cable Assembly
Mil-Spec Connectors
- PC Series
- OHS Series
- ZH23 Series
- YW Series Connector
- MIL-DTL-5015
- MIL-DTL-26482
- J36B Series Connector
Machine Vision Cable
- USB Industrial Camera Cable
- PoCL Camera Link Cable
- CXP-12 Cable
- GigE Camera Cable
- Keyence Vision Cable
- Cognex Vision Cable
- Camera Trigger Cable
- Datalogic Cable
- Infiniband CX4 Cable
- Active USB High Flex Cable
PoweredUSB Cable
- 12V
- 24V
- 12V To 24V
Panel Mount Cables
- Round Panel Mount Cable
- D-type Panel Mount Cable
- D-type Panel Mount Adapter
- Round Panel Mount Adapter
- Metal Round Panel Mount Cable
- Snap-in Panel Mount Cable
- Screw Lock Panel Mount Cable
- Panel Mount AIuminum
RF Coaxial Cable
- Attenuator
- FAKRA Series
- BNC
- N-Type
- SMA
- TNC
- Mimo
RS232 RS485 RS422 Cable
- USB RS232 Serial Cable
- RS232 485 422 TTL Converter
- Multiport RS232 485 422 Adapter
SPE Cable
SCSI Cable
Sensor & Actuator Cables
- M8 Cables & Assemblies
- M12 Cables & Assemblies
- M16 Cables & Assemblies
- 7/8'' Cables & Assemblies
- M23 Cables & Assemblies
- Field Wireable Connector
- Solenoid Valve Connector
- Feedthrough Panel Connector
XT60 Cable

Solenoid Valve Connectors, DIN 43650 Plugs & M8/M12 Valve Interfaces

Solenoid valve connection components for pneumatic systems, hydraulic manifolds, fluid-control equipment, process automation, machine I/O and industrial actuators. This collection includes DIN 43650 / EN 175301-803 valve plugs and device-side connector formats, field-attachable Form A and selected Form C interfaces, G-series rectangular and PCB-mount valve connectors, LED and diode-equipped valve plugs, M8 / M12-to-DIN adapters, M8 / M12 valve cable assemblies and application-specific coil connection solutions.

Choose by the complete valve-side and control-side requirement: valve coil or device reference, DIN form or connector series, plug or base format, contact configuration, connector gender, exact pin assignment, cable-entry method, required cable length, M8 or M12 interface details where applicable, indicator or suppression function, coil voltage, AC/DC requirement, polarity and installation environment. A valve-connector family name, center screw style or similar housing appearance does not define a universal pinout, voltage rating, coil function or replacement compatibility.

M12 5-Pin Male To DIN 43650 Form C Valve Connector Cable With Yellow LED And VDR, Compa...
PCM-HS-009 is an M12 A-coded 5-pin male to DIN 43650 / EN 175301-803 Form C solenoid valve connector cable designed for DC valve and actuator applications.The cable is constructed with 3 × 0.50 mm²
M12 4 Pin Male To DIN 43650 Form A Solenoid Valve Connector Cable Compatible With IFM E...
M12 A-coded 4-pin male to DIN 43650 / EN 175301-803 Form A solenoid valve connector cable.Only two pins are wired:M12 Pin 4 to Form A Pin 1M12 Pin 2 to Form A Pin 2Features 2 x 0.75 mm² PUR cable, 24
VAD 3C-4-1-M12-5 DIN Valve Adapter To M12
The VAD 3C-4-1-M12-5 DIN-to-M12 Valve Adapter is fully compatible with the VAD 3C-4-1-M12-5 (46568) model. Featuring a compact design and stable connectivity, it is suitable for signal and power
Hirschmann G4A5M Connector For Circuit Board
The Hirschmann G4A5M is a 4-pin, PCB-mount rectangular connector featuring a solder terminal design. Compact in structure and offering reliable connectivity, it is suitable for electrical connections
Hirschmann G4A1M Solenoid Valve Connector
The Hirschmann G4A1M is a square plug connector specifically designed for solenoid valves. It is suitable for PCB connections at the device end and supports solder-type embedded mounting, thereby
Hirschmann G4KW1F Industrial Connector
The Hirschmann G4KW1F Industrial Connector is a 4-pin, rectangular industrial connector from the G-series, featuring solder terminals and a cable-mount configuration. Compact in design and ensuring
Hirschmann GSA 3000 N DIN Solenoid Valve Connector
The Hirschmann GSA 3000N DIN Solenoid Valve Connector is an industrial solenoid valve connector compliant with the DIN 43650 / EN 175301-803 Form A standard. Featuring a square male base and solder
GDM 3016 DIN 43650 Form A Solenoid Valve Connector
The GDM 3016 DIN 43650 Form A Solenoid Valve Connector is a solenoid valve connector compliant with the DIN 43650 / EN 175301-803 Form A standard. Featuring a 3+PE contact configuration and an M16
GSR-U 3000 LO Din 43650 Circular Base Connector
The GSR-U 3000 LO DIN 43650 Circular Base Connector is a solenoid valve circular base connector compliant with the DIN 43650 Type A (EN 175301-803) standard. Compatible with the GSR-U 3000 LO
From A M12 To DIN 43650 Solenoid Valve Connector
The Type A DIN 43650 to M12 connector is a field-installable DIN valve adapter widely utilized in industrial automation, hydraulic and pneumatic systems, as well as demanding sectors such as the oil
Hirschmann G4KW1F To M12 Female Cable
The Hirschmann G4KW1F-to-M12 Female Cable is an industrial automation connection cable featuring a G4KW1F valve connector at one end and an M12 female interface at the other. The M12 connector
Hirschmann G4KW1F To M12 Cable
The Hirschmann G4KW1F to M12 Cable is an industrial automation connection cable featuring a Hirschmann G-series G4KW1F valve connector at one end and an M12 circular connector at the other, designed

First 12 Last

How to Select the Right Solenoid Valve Connector

Solenoid valve connector selection is a combined mechanical and electrical fit check. This collection covers DIN 43650 / EN 175301-803 valve plugs and bases, LED and diode-equipped coil connectors, M8 / M12-to-DIN adapters, G-series cable and board interfaces, and application-specific valve cable assemblies. The correct product must match the actual valve-side mating interface, coil circuit, control-side connection and installation conditions from end to end.

Application	Typical Connector Role	Confirm Before Ordering
Pneumatic, hydraulic or process valve coil	DIN 43650 / EN 175301-803 plug, base or field-attachable connector that supplies the defined power or control circuit to a compatible valve coil or device interface.	DIN form, plug or base format, contact configuration, center-fixing style, coil-side wiring, cable entry, voltage/current requirement, sealing requirement and original equipment reference.
Valve coil with power-status indication or suppression	Specified DIN valve connector with an LED indicator, diode or other listed coil-protection component for a compatible electrical control circuit.	Coil voltage, AC/DC operation, polarity, required LED color/function, protection-circuit requirement, contact configuration, source wiring and equipment documentation.
M8 / M12 sensor-actuator control connection to a valve	M8 or M12 cable or adapter assembly that routes a verified industrial I/O connection to a specified DIN valve interface.	M8/M12 connector coding and contact count, connector gender, valve-side DIN form, complete pin map, cable orientation, cable length, device supply and output wiring requirement.
G-series or PCB-mounted valve connection	Rectangular cable connector, right-angle cordset or board-mounted connector used in a defined valve, actuator or industrial equipment connection.	Exact connector series, mating geometry, contact count, cable versus PCB mounting method, pin assignment, solder or termination format, cable exit direction and equipment-side requirement.

Common Valve Connector Formats in This Collection

DIN 43650 / EN 175301-803 Plugs, Bases & Field-Attachable Types

Used for specified solenoid valves, pressure switches and industrial actuators with a matching DIN-style interface. Confirm the exact form, contact configuration, connector half, center-fixing method and cable-entry arrangement before choosing a replacement. Similar rectangular valve plugs may not mate with the same coil.

LED, Diode & Protected Coil Connectors

Used where the connector itself must provide a specified indicator or coil-protection function. Confirm the coil voltage, DC polarity, AC/DC suitability and exact protection arrangement. An LED or diode-equipped plug should not be substituted based only on housing shape or contact count.

M8 / M12 Adapters, G-Series Cords & Board Interfaces

Used to connect a specified valve or actuator interface to machine I/O, a sensor/actuator cable, a rectangular control connector or a circuit board. Select from the complete end-to-end connection requirement, including M8/M12 details, DIN form, pinout, mounting style and cable routing—not from the connector shell alone.

Valve connector appearance is not a compatibility guarantee. Form A and Form C interfaces differ mechanically, and products with similar contact counts can still differ in mating geometry, pin assignments, coil voltage, LED circuit, diode polarity, cable entry and intended wiring. M8 and M12 connections also require the correct coding, gender and pin map. Use the original part number, valve-coil drawing or verified wiring diagram to confirm replacement compatibility.

Information Needed for a Custom Valve Connector or Cable Assembly

For a compatible custom solenoid valve connector or cable assembly, provide as much of the following information as possible:

Valve, coil, manifold, sensor or actuator brand and model Original connector, cable or equipment part number Photos of both mating faces, center screw and cable-entry side DIN form, G-series, M8, M12 or other connector-series requirement Contact configuration, connector gender and full pinout Coil voltage, AC/DC operation, polarity and electrical load LED color, diode, rectifier or other required protection feature Cable length, outlet direction, cable entry, sealing and installation environment

FAQ

What is the difference between DIN 43650 Form A and Form C connectors?

They are different EN 175301-803 connector formats with different mating dimensions and application details. A Form A connector should not be assumed to fit a Form C coil or device interface. Confirm the exact form from the valve documentation, original part number or mating-face dimensions.

Are all valve connectors with the same contact count interchangeable?

No. The same contact count does not confirm the connector form, pin layout, center fixing, polarity, LED circuit, cable entry, voltage requirement or mating compatibility. Verify the complete connector specification before selecting a replacement.

Can an M8 or M12-to-DIN adapter connect to every solenoid valve?

No. The valve-side DIN form, M8/M12 coding, connector gender, contact count and full wiring must match the actual device. A passive adapter does not convert an incompatible control signal, change coil voltage or correct an unknown pin assignment.

Can I choose an LED or diode valve connector without checking coil voltage and polarity?

No. Indicator and protection components are circuit-specific. Confirm the coil voltage, AC/DC operation, polarity and required function so the selected connector matches the actual valve control circuit.

Can a valve connector convert 24V control power to another voltage?

No. A standard connector, adapter or cable assembly routes the specified conductors. It does not regulate, step up, step down or convert control voltage. Select the coil and connector assembly for the actual system voltage and wiring requirement.

How do I request a compatibility review or custom valve connector cable?

Send the valve or coil details, original connector reference, photos, DIN form or interface details, pinout or wiring diagram, coil voltage, required cable length and installation information. Contact us for a compatibility review.

PCM Cable Co., Ltd. is one of the leading solenoid valve connector manufacturers and suppliers in China. We warmly welcome you to buy advanced solenoid valve connector in stock here from our factory. All customized products are with high quality and low price. Contact us for quotation and free sample.