Product Specifications
| Item | Specification |
| Compliance | RoHS |
| Flame Rating | Flame retardant |
| Conductor | Oxygen free copper |
| Cable Type | Twisted pair, fully shielded |
| Config 3 | A coded male to bare cut wires |
| Use Environment | In vehicle electronic equipment |
| Brand | TE Connectivity GEMnet series |
| Data Rate | Up to 10 Gbps, multi gigabit automotive Ethernet |
| Config 2 | A coded male to A coded male, 2368003-1 both ends, black |
| Cable | LEONI Dacar 686-3, 10G fully shielded automotive Ethernet |
| Product Type | GEMnet single port 10G Ethernet extension and adapter harness |
| Config 1 | A coded male to A coded female, 2368003-1 to 2368022-1, black |
| Length Options | 0.5 m, 1 m, 1.5 m, 2 m, 2.5 m, 3 m, 4 m, 5 m, 6 m, custom on request |
| Main Connector | GEMnet single port A coded male, 2368003-1, black housing, pink latch |
Available Configurations
A Coded Male to A Coded Female
One end is the GEMnet A coded male, 2368003-1, black housing with pink latch, and the other end is the GEMnet A coded female, 2368022-1, black housing with red release latch.
Use it when you need to adapt a male pigtail to a female socket, such as bridging a male ended camera to a female ended ECU port. The male end plugs into a female receptacle and the female end accepts a male plug. The 0.5 m to 6 m length range covers everything from a tight dashboard jump to a trunk to cabin run.
A Coded Male to A Coded Male
Both ends are the GEMnet A coded male, part number 2368003-1, black housing with pink latch.
Use it when you need to extend a male pigtail between two female sockets, such as bridging two factory female ended harnesses. The male to male gender reaches across the gap without cutting either factory pigtail. The 0.5 m to 6 m range covers bench to device and across cabin routing.
A Coded Male to Bare Cut Wires
One end is the GEMnet A coded male, 2368003-1, black housing, and the other end is left as bare cut wires with the green and white pairs exposed.
Use it when you need to terminate the other end yourself, such as soldering to a test board, mating to a non GEMnet connector, or building a custom harness. The A coded male end gives you a certified GEMnet interface, and the bare end lets you define your own termination. The 0.5 m to 6 m range covers bench to device routing.
Applications
| Application | How It Is Used | What It Enables |
| Gender adaptation | Cross a male pigtail to a female socket. | Bridges two factory harnesses with opposite genders. |
| Bench test rig | Wire GEMnet ECUs to test instruments with male to male or bare ends. | Repeatable 10G test links instead of hand built cables. |
| Aftermarket retrofit | Extend GEMnet Ethernet links in a retrofit install. | Keeps the 10G signal clean through the dashboard routing. |
| GEMnet pigtail extension | Extend a factory GEMnet male or female pigtail. | Reaches a relocated ECU or sensor without cutting the factory harness. |
| Custom harness build | Use the bare or pin end to terminate to your own connector. | A certified GEMnet interface with custom termination on one or both ends. |
Closing line: because both ends are TE GEMnet contacts on the same shielded Dacar 686-3 cable, the 10G link stays impedance matched end to end.
Professional Services
Connector customization: other GEMnet variants quoted on request.
Fast sampling: small batch samples in days, production volumes on a confirmed lead time.
Length customization: 0.5 m to 6 m in stock. Non standard cut lengths built to your drawing.
Quality before dispatch: 100 percent continuity and shielding continuity tested on every assembly before dispatch.
Configuration customization: 4 end options as shown. Other GEMnet gender and coding combinations quoted on request.
OEM and bulk support: ADAS integrators, zonal ECU developers and R and D labs get volume pricing and private label packaging.
Product FAQ
Q1: Which length should I order?
0.5 m to 1 m for bench or tight ECU jumps, 2 m to 3 m for dashboard routing, 4 m to 6 m for trunk or across cabin runs. When in doubt, take the next length up.
Q2: Is this a genuine TE GEMnet connector?
Yes. The A coded male housing is genuine TE GEMnet, part number 2368003-1, black with pink release latch. The cable is original LEONI Dacar 686-3 fully shielded 10G automotive Ethernet.
Q3: Can you make custom lengths or end options?
Yes. We support custom lengths from 0.5 m to 6 m and beyond, and can quote other GEMnet gender and coding combinations on request. Send us your connector photos and target length, and we will quote the matching cable.
Q4: What data rate does it support?
Up to 10 Gbps over the LEONI Dacar 686-3 fully shielded twisted pair, built for multi gigabit automotive Ethernet.
Hot Tags: TE GEMnet Single Port To LEONI Dacar Ethernet Cable, China TE GEMnet Single Port To LEONI Dacar Ethernet Cable manufacturers, suppliers, factory
