Description

Send Inquiry

Polarization B Mini-B Male to Male Shielded Cable

Premier Cable PCM-ZC-0268 connects two Polarization B Mini-B equipment interfaces through a single shielded cable. Both ends use grey locking housings with mating interfaces compatible with Molex 111014-9001.

The assembly maintains the same connector format at each end. Its documented conductor connections give engineers a clear reference when reviewing equipment wiring, while the locking housings address installations that require mechanical retention beyond the metal plug alone.

Product Specifications

Parameter	Specification
Characteristic Impedance	90 Ω
Frequency	480 MHz
Product Series	PCM-ZC-0268
Shielding	Foil and braid
Insulation Resistance	100 MΩ minimum
Operating Temperature	−40°C to +105°C
Dielectric Withstand	500 VRMS minimum
Jacket and Diameter	Black PVC, 4.6 mm
Drawing Length L	500 ±15 mm or 1000 ±20 mm
Cable Construction	26 AWG signal pair and two 24 AWG conductors
Mechanical Requirements	At least 25 mating cycles, axial pull force at least 110 N
Interfaces	Two Polarization B Mini-B male plugs, compatible with Molex 111014-9001

Matching Polarization B Plugs And Cable Construction

1 1

Identical Connector Format

Both cable ends use Polarization B Mini-B plugs compatible with Molex 111014-9001. The assembly connects equipment interfaces that require the same polarized mating format.

Grey Locking Housings

Each grey housing surrounds the Mini-B metal plug and incorporates a top latch. The housing profile and latch position form part of the mechanical mating requirements.

Defined Conductor Routing

The drawing connects pins 1, 2, 3 and 5 to the same numbered pins at the opposite end. It also specifies a separate connection between the two connector shells.

Shielded PVC Cable Body

Foil and braid shielding enclose the cable conductors beneath a black PVC jacket. Black PVC molding forms the rear transition between each connector housing and the cable.

4 1

Technical Drawing

Applications & Customer Value

Equipment Interconnection

Equipment builders can connect two matching Polarization B interfaces without introducing a different connector format into the cable route.

Prototype Wiring Review

Development teams can compare the documented connections with their equipment schematics before committing to a production harness.

Fixed Length Assembly

The specified length tolerances give assembly teams a defined cable dimension for routing reviews and repeat purchasing.

2 1

Product FAQ

Q1. Is PCM-ZC-0268 a Mini-B extension cable?

It is a male to male cable. An extension cable typically requires a female connection at one end, so the receiving interfaces must be checked before selection.

Q2. Can this cable mate with a Polarization A interface?

This assembly specifies Polarization B at both ends. Confirm the receiving housing geometry and polarization rather than selecting by the Mini-B metal plug shape alone.

Q3. Does the Mini-B interface confirm compatibility with any USB device?

No. The connector shape does not establish equipment compatibility. The receiving device must match the housing, electrical requirements and documented wiring.

Q4. Are all five Mini-B contacts connected?

The drawing lists connections for pins 1, 2, 3 and 5, plus shell continuity. It does not show a conductor connection for pin 4. Confirm pin assignment before ordering.

Q5. What information does Premier Cable need for an OEM quotation?

Send the mating interface details, required length, wiring definition and quantity. Premier Cable supports connector and cable specification review, prototype builds, mass production, labels and packaging.

sgs- 1