Product Specifications
| Parameter | Specification |
| Cable Configuration | 4 Pole |
| Country of Origin | Germany |
| Cable Type | DACAR 535 |
| Application | Automotive |
| Brand | Rosenberger |
| Product Series | RosenbergerHSD® |
| Product Number | LD5-219-xxxx-y-y |
| Armouring | Without Armouring |
| Side A Coding | A, B, C, D, E, F, Z |
| Side B Coding | A, B, C, D, E, F, Z |
| Cable Length | xxxx mm, Configurable |
| Side B Connector | 90° HSD Jack, Cable Down |
| Product Type | Automotive Cable Assembly |
| Side A Connector | 90° HSD Jack, Cable Right |
Product Features and Connector Design

Right Exit and Down Exit Connector Geometry
The LD5-219 is distinguished by the combination of a rightward cable exit on Side A and a downward cable exit on Side B. Although both connectors are 90 degree RosenbergerHSD® jacks, their different orientations create a specific routing arrangement across the complete assembly. This configuration is relevant when the two connection points are positioned differently within an automotive electronic system and require separate cable approach directions. Instead of treating connector orientation as a secondary detail, engineers can select the LD5-219 according to the actual routing path required at each interface. This helps make connector geometry an integral part of cable assembly selection and installation planning.
DACAR 535 Four Pole Cable with Matching Coding Options
Both connector ends support coding options A, B, C, D, E, F and Z, providing a shared coding range for specifying the required mating interfaces. The assembly connects these interfaces through DACAR 535 4 pole cable and uses an unarmoured construction. Its LD5-219 ordering designation separates the two essential purchasing details: xxxx represents the cable length in millimeters, while y-y identifies the coding combination for Side A and Side B. This structured configuration is useful for automotive engineering and procurement teams that need to verify connector compatibility, cable specifications and required assembly dimensions before placing an order.

Automotive Applications and Supply Support
Automotive HSD Connection Networks
The LD5-219 is designed for automotive electronic architectures using RosenbergerHSD® interfaces. Its two right angle jacks provide a defined connection arrangement for systems requiring angled interfaces at both ends, with different cable approach directions at each connection point.
Genuine Rosenberger Product Sourcing
PCM supplies genuine Rosenberger connectivity products for B2B purchasing requirements. Customers can submit the LD5-219 series reference, required cable length, coding at both ends and purchasing quantity to discuss product identification, availability inquiries and quotation arrangements.
Engineering Evaluation and Production Procurement
For automotive OEMs, Tier 1 and Tier 2 suppliers, the LD5-219 offers a clearly identified combination of connector geometry, coding options and cable specification. Engineering teams can evaluate the two exit directions against their equipment layout, while purchasing departments can use the complete ordering reference to coordinate the required cable length and connector coding.
Vehicle Cable Routing and Installation Planning
In vehicle electronic assemblies, the position of each mating interface can influence the required cable path. The right exit and down exit arrangement of the LD5-219 gives engineers a specific routing option when planning connections between components positioned at different orientations. Selecting the correct assembly geometry helps avoid unnecessary changes to the intended connection layout.
Frequently Asked Questions
Which connector coding options are supported by the assembly ?
Both Side A and Side B support A, B, C, D, E, F and Z coding options. The required coding combination should be specified for each connector end when ordering.
How are the two connector orientations arranged in the LD5-219 ?
Side A uses a 90 degree HSD jack with a rightward cable exit, while Side B has a 90 degree HSD jack with a downward cable exit. This creates different routing directions at the two ends.
What cable specification is used in this Rosenberger assembly ?
The LD5-219 uses DACAR 535 4 pole cable in an unarmoured construction. This identifies the cable configuration for customers evaluating compatible RosenbergerHSD® connection requirements.
What information is represented by xxxx and y-y in the product number ?
The xxxx field represents cable length in millimeters, while y-y identifies the coding combination of the Side A and Side B connectors. Both details are important when specifying the required assembly.
What should automotive buyers provide when requesting a quotation ?
Please provide the required cable length, Side A and Side B connector coding, purchasing quantity and delivery destination. These details help PCM identify the intended Rosenberger configuration and support an accurate quotation inquiry.
Hot Tags: rosenberger hsd ld5-219 right angle cable, China rosenberger hsd ld5-219 right angle cable manufacturers, suppliers, factory

