Product Specifications
| Parameter | Specification |
| Cable Configuration | 4 Pole |
| Country of Origin | Germany |
| Cable Type | DACAR 535 |
| Brand | Rosenberger |
| Product Series | RosenbergerHSD® |
| Product Number | LD5-222-xxxx-y-y |
| Armouring | Without Armouring |
| Side A Coding | G, H, J, K, L, M, O |
| Side B Coding | G, H, J, K, L, M, O |
| Cable Length | xxxx mm, Configurable |
| Side A Connector | 90° HSD Jack, Cable Up |
| Side B Connector | 90° HSD Jack, Cable Up |
| Product Type | Automotive Cable Assembly |
| Mating Compatibility | Both Ends Only Mateable with Plugs |
Product Features and Connector Design

Dual Upward Exit Geometry for Consistent Cable Routing
Both ends of the LD5-222 use 90 degree RosenbergerHSD® jack connectors with upward cable exits. Unlike assemblies combining different exit directions, this model maintains the same connector orientation at Side A and Side B. This arrangement is relevant to automotive equipment layouts where both connection points are designed to accommodate upward cable routing. The consistent geometry gives engineering teams a clear reference when evaluating connector positioning, available clearance and cable path requirements. It also makes the LD5-222 easy to distinguish from other LD5 configurations that use downward, leftward or rightward cable exits.
Plug Only Mating Compatibility with Matching HSD Coding
The LD5-222 has a specific mating requirement that should be considered before product selection: both Side A and Side B connectors are only mateable with compatible plugs. Both ends support the same coding options, including G, H, J, K, L, M and O. This consistent coding arrangement helps simplify the identification of the required mating interface, while still requiring customers to verify the corresponding plug type and coding. The assembly uses DACAR 535 4 pole cable in an unarmoured construction, with cable length and connector coding identified through its ordering reference. These details are particularly important for engineering verification and accurate procurement.

Automotive Applications and Supply Support
OEM and Tier Supplier Purchasing
Automotive OEMs, Tier 1 and Tier 2 suppliers, system integrators and harness manufacturers can use the LD5-222 product reference to identify a specific HSD cable configuration. Specifying the cable length and coding requirements helps purchasing teams coordinate the correct assembly for development projects, production planning and replacement sourcing.
Automotive HSD Connection Architectures
The LD5-222 is intended for automotive electronic systems incorporating RosenbergerHSD® connection technology. Its dual upward exit connector arrangement provides a defined interface configuration for equipment layouts designed around matching right angle HSD connections.
Plug Compatibility and Connector Selection
Unlike cable assemblies that may use different mating interface requirements at opposite ends, the LD5-222 specifies plug only compatibility for both connectors. Engineering teams should verify the corresponding plug type and G, H, J, K, L, M or O coding before integrating the assembly into their equipment. This verification is important for avoiding mismatched mating components during system design and procurement.
Genuine Rosenberger Product Sourcing Through PCM
PCM supplies Rosenberger connectivity products for professional B2B purchasing requirements. Customers can submit the required cable length, connector coding and purchasing quantity to discuss product identification, mating compatibility and quotation arrangements for the LD5-222 series.
Frequently Asked Questions
What cable exit orientation does the Rosenberger LD5-222 use ?
Both Side A and Side B feature 90 degree RosenbergerHSD® jack connectors with upward cable exits, providing a consistent routing orientation at both ends.
Which mating connectors are compatible with the LD5-222 ?
Both cable assembly connectors are designed to mate only with compatible plugs. The mating plug type and coding should be verified before ordering or system integration.
What coding options are available at Side A and Side B ?
Both ends support G, H, J, K, L, M and O coding options. Customers should specify the required coding combination for the two connector ends when requesting the assembly.
Which cable is used in the LD5-222 assembly ?
The assembly uses DACAR 535 4 pole cable in an unarmoured construction. Its cable length is specified through the xxxx field in the product designation.
What information should I provide when requesting an LD5-222 quotation ?
Please provide the required cable length, Side A and Side B coding, compatible mating plug requirements, purchasing quantity and delivery destination. PCM can use these details to assist with product identification and quotation inquiries.
Hot Tags: rosenberger ld5-222-xxxx-y-y cable, China rosenberger ld5-222-xxxx-y-y cable manufacturers, suppliers, factory

