Product Specifications
| Parameter | Specification |
| Cable Configuration | 4 Pole |
| Cable Length | xxxx mm |
| Cable Type | DACAR 535 |
| Application | Automotive |
| Brand | Rosenberger |
| Product Series | RosenbergerHSD® |
| Product Number | LD5-228-xxxx-y-y |
| Armouring | Without Armouring |
| Side A Coding | A, B, C, D, E, F, Z |
| Side B Coding | A, B, C, D, E, F, Z |
| Connector Coding | y-y, Side A and Side B |
| Side A Connector | 90° HSD Jack, Cable Left |
| Product Type | Automotive Cable Assembly |
| Side B Connector | 90° HSD Jack, Cable Right |
Product Features and Connector Design

Opposing Left and Right Cable Exit Configuration
The LD5-228 is distinguished by its opposing cable exit arrangement. Side A features a 90 degree HSD jack with a leftward cable exit, while Side B uses a 90 degree HSD jack with a rightward exit. This geometry provides a specific solution for automotive equipment layouts where the two connection points require cables to extend in opposite directions. Rather than using identical connector orientations, the assembly accommodates two different routing paths within one integrated cable configuration. This is particularly relevant when evaluating connector positioning, surrounding component clearance and harness installation space. Correct identification of both connector positions helps engineering teams select the appropriate assembly for their equipment layout.
Common Coding Options and DACAR 535 Cable Construction
Both ends support A, B, C, D, E, F and Z HSD coding, providing the same coding selection range for Side A and Side B. The required coding combination is identified through the y-y portion of the product reference, while xxxx specifies the cable length in millimeters. The assembly uses DACAR 535 4 pole cable in an unarmoured construction. For automotive engineering and procurement teams, these specifications help establish the correct connector combination and cable configuration before ordering. Customers should identify the required code at each end and confirm the overall cable length when requesting a specific LD5-228 variant.

Applications and Supply Support
Automotive Electronic Connection Systems
The LD5-228 provides a RosenbergerHSD® connection solution for automotive electronic systems requiring different cable exit directions at opposite ends. Its left and right routing arrangement offers a defined configuration for equipment with separately positioned connection interfaces.
Opposing Cable Routing Requirements
In compact automotive equipment, the direction in which a cable leaves each connector can affect installation planning and available space. The LD5-228 combines leftward and rightward exits within one assembly, allowing engineers to evaluate the configuration against their equipment geometry and harness routing requirements.
Genuine Rosenberger Supply Through PCM
PCM supplies genuine Rosenberger connectivity products for professional B2B purchasing requirements. Customers can provide the LD5-228 reference, required cable length, coding at both connector ends and purchasing quantity. Our team can assist with product identification, configuration verification and quotation inquiries.
OEM and Tier Supplier Procurement
Automotive OEMs, Tier 1 and Tier 2 suppliers, system integrators and professional harness manufacturers can specify the LD5-228 according to their required cable length and connector coding combination. Providing the complete product reference helps purchasing teams distinguish the required configuration during prototype development, production sourcing and replacement procurement.
Frequently Asked Questions
What makes the Rosenberger LD5-228 different from other HSD cable assemblies ?
The LD5-228 features opposing cable exits, with Side A directing the cable left and Side B directing it right. This arrangement is its defining structural characteristic.
Which coding options are available at both connector ends ?
Both Side A and Side B support A, B, C, D, E, F and Z coding. Customers should specify the required coding combination for the two connector positions.
What cable specification does the LD5-228 use ?
The assembly uses DACAR 535 4 pole cable in an unarmoured construction. This identifies the cable type and configuration for compatible automotive HSD applications.
How is the required cable length specified ?
The xxxx field in the product designation represents cable length in millimeters. Customers should provide the required length when requesting a specific LD5-228 configuration.
What information should I provide when requesting a quotation ?
Please provide the required cable length, Side A coding, Side B coding, purchasing quantity and delivery destination. PCM can use these details to assist with product identification and quotation inquiries.
Hot Tags: rosenberger ld5-228-xxxx-y-y cable, China rosenberger ld5-228-xxxx-y-y cable manufacturers, suppliers, factory

