Product Specifications
| Item | Specification |
|---|---|
|
Color Classification |
Water blue |
|
Housing Color |
Water blue cyan with yellow color-coding band |
|
Cable Jacket |
Round, black, combined coax + twin-power layout |
|
Connector Gender |
FAKRA female to FAKRA female both ends identical |
|
Connector System |
FAKRA, Z-coded universal, female jack on both ends |
|
Connector System |
FAKRA, Z-coded universal, female jack on both ends |
|
Video Path |
FAKRA coaxial 50 Ω - camera video CVBS LVDS-over-coax |
|
Power Path |
2-pin pigtail: red 12V, black GND, running parallel to the coax |
|
Length Options |
0.1 m, 0.5 m, 1 m, 1.5 m, 2 m, 3.5 m custom lengths on request |
|
Use Environment |
In-vehicle electronic equipment interior camera & head-unit routing |
|
Product Type |
Automotive camera extension harness FAKRA video 2-pin 12V power |
|
Custom Product |
Yes - built to order; no return exchange unless a quality defect is found |
|
Vehicle Fitment |
BYD dashcam rearview surround-view camera systems universal Z-type |
Available Configurations

One Cable, Two Jobs FAKRA Video
A parallel 2‑pin power pigtail with red +12 V and black GND wires runs alongside the coax, delivering camera power through one assembly instead of a separate cable routed through interior trim.It is offered in six standard lengths ranging from 0.1 m to 3.5 m.
This integrated BYD camera extension harness features water‑blue FAKRA Z‑coded female connectors at both ends, which mate directly with factory dashcam pigtails and head‑unit FAKRA jacks.
12V Power, Pre-Terminated at Both Ends
The FAKRA coax transmits rearview, dashcam and surround‑view video signals end‑to‑end without intermediate splices.Combining video coax and power lines in one harness simplifies installation, reduces fasteners and eases dashboard trim removal.
The universal Z coded water‑blue FAKRA housing serves as a service replacement for BYD factory camera harnesses with water‑blue or yellow‑band variants. All connectors are factory terminated to avoid intermittent video or blank‑screen faults commonly caused by hand crimped FAKRA contacts.

Applications
|
Application |
How It Is Used |
What It Enables |
|
R&D bench camera bring-up |
0.1 m , 0.5 m lengths make a short bench jumper between a camera module and a FAKRA-equipped test head unit. |
Fast bench connection without soldering a coax pigtail. |
|
Rearview camera to aftermarket display |
Run the FAKRA video 12V power from the tailgate camera to a new Android aftermarket head unit. |
One routed cable instead of separate video RCA and 12V trigger wires. |
|
360° surround-view camera extension |
Bridge a factory surround-view camera pigtail out to a replacement head unit that expects a FAKRA input. |
Avoids custom coax splicing that loses the 50 Ω impedance the camera video needs. |
|
Aftermarket camera retrofit shops |
Use as a generic extension when the factory pigtail is too short for a new mirror, screen or bracket. |
Standard stock item - shop keeps 0.5 m 1 m 2 m on the shelf, installs same-day. |
|
BYD dashcam relocation |
Extend the factory FAKRA camera pigtail and 12V feed when moving the dashcam to a new bracket / behind the rearview mirror. |
Reuse the OEM camera on a relocated mount without cutting the factory harness. |
Closing line: Because the FAKRA contact and the 12V power lead are terminated together at the factory, you get both video and power in one plug - the most common no image no power fault on BYD camera retrofits is eliminated before the trim goes back on.
Professional Services
Length customization: 0.1 m–3.5 m in stock; non-standard cut lengths built to your drawing on request.
Engineering docs: Datasheet, pinout red 12V black GND and connector mating info available on request.
Quality before dispatch: 100% video-coax continuity + power-line continuity tested on every harness; test reports on request.
OEM & bulk support: aftermarket chains, dashcam installers and retrofit workshops get volume pricing and private-label packaging.
Connector customization: FAKRA male female, different color-band coding, and FAKRA-to-RCA, FAKRA-to-JVC variants quoted on request.
Product FAQ
Q1: Which length should I order?
0.1 m for bench-to-device jumpers; 0.5 m for short in-camera-gap extensions; 1 m–1.5 m for head-unit-to-dashcam runs; 2 m–3.5 m for tailgate trunk-to-head-unit or door-to-ECU routing. When in doubt, take the next length up - excess can be coiled neatly, but a harness that is too short cannot be extended in the field.
Q2: Is this FAKRA male or female?
FAKRA female jack on both ends, water-blue housing with yellow band. It extends a male-to-male factory pigtail or mates between two female FAKRA panels sockets - confirm your vehicle's connector gender against the photos before ordering.
Q3: What do the red and black wires do?
Red 12V power feed, black = ground GND. They run parallel to the FAKRA coax so the camera gets both video and 12V power from one routed harness. Connect red to a switched 12V source and black to chassis ground at the head-unit, camera end.
Q4: Which vehicles is this harness for?
It is built for BYD dashcam, rearview and surround-view camera systems that use a water-blue FAKRA Z-coded camera pigtail. It is the universal Z-type replacement extension; please compare your factory connector shape and color band with the listing photos before ordering.
Hot Tags: fakra z coded camera cable, China fakra z coded camera cable manufacturers, suppliers, factory

