Product Specifications
| Item | Specification |
| Number of Branches | 4 |
| Nominal Impedance | 100Ω |
| Heat Shrink Length | 20mm |
| Heat Shrink Outside Diameter | 4.8mm |
| Branch Connector Part Number | 2302461-9 |
| Frequency Range | DC to 10GHz |
| Continuity Test | 100% tested |
| Cable Retention | 110N minimum |
| Drawing Number | PCM-XY-0035-X |
| Main Connector Part Number | E6K10D-1CAZ5-Z |
| Operating Temperature | -40°C to 105°C |
| Available Cable Lengths | 0.5m, 1m and 2m |
| Hi-Pot | 500Vrms minimum |
| Heat Shrink Tubing | Black double wall |
| Connector 1 | 1 H-MTD Jack Z Code |
| Connectors 2 to 5 | 4 MATEnet Plug Z Code |
| Branch Connector | TE MATEnet Plug Z Code |
| Main Connector | Rosenberger H-MTD Jack Z Code |
| Cable Type | G&G 2Speed 251 10G Ethernet Cable |
| Product Type | Automotive Ethernet Breakout Cable Assembly |
Connector Design & Construction
Connector Configuration
This assembly uses a four way breakout layout, with one Rosenberger H-MTD Jack Z Code connector at the main end and four TE MATEnet Plug Z Code connectors at the branch ends. The main interface is equipped with the original Rosenberger E6K10D-1CAZ5-Z connector, while all four output branches use TE 2302461-9 plugs. Unlike larger multi branch harness configurations, this four output arrangement keeps the connection layout focused on four individual interfaces. Each branch terminates separately, allowing the connectors to reach their corresponding equipment positions without requiring a common multi-port connector at the output end. The arrangement is designed around the specified H-MTD and MATEnet mating interfaces.
Keying And Mating Compatibility
The main connector and all four branch connectors use Z Code configurations. The Rosenberger H-MTD Jack and TE MATEnet Plug have different housing designs and mating interfaces, so compatibility must be checked against the corresponding connector series rather than determined by color alone. The main interface requires a compatible H-MTD mating connector, while each output requires the appropriate MATEnet mating component. Confirm the Z Code designation, connector part number and housing profile before integrating the assembly into an existing vehicle harness. This is particularly important when several connector families are used within the same electronic system.
Pin Assignment And Electrical Connection
The eight contact positions of the H-MTD connector are arranged into four pairs, with each pair routed to one MATEnet output. Pins 1 and 2 connect to P2, Pins 3 and 4 connect to P3, Pins 5 and 6 connect to P4, and Pins 7 and 8 connect to P5. Each output maintains the corresponding two-contact assignment, with the white wire connected to Pin 1 and the green wire connected to Pin 2. The drawing also specifies a ground connection between the main connector shell and the four branch connector shells. These defined electrical paths provide a clear reference for continuity inspection and individual branch verification during assembly and incoming quality checks.
Cable Construction And Mechanical Details
G&G 2Speed 251 Ethernet cable forms the four individual branches extending from the main H-MTD connector. Each branch is terminated with a TE MATEnet Plug Z Code connector and includes a black double wall heat shrink section measuring 4.8mm in outside diameter and 20mm in length. The separate cable runs allow the four output connectors to be positioned according to the equipment layout. When planning installation, consider the required routing distance, branch separation and clearance around each connector. The available overall cable lengths provide different routing options for compact assemblies and installations where the connected modules are positioned farther apart.
Applications
Automotive Ethernet Network Integration
Connect a compatible H-MTD interface to four MATEnet connection points within an automotive Ethernet wiring system. The four-way arrangement provides a straightforward solution for projects requiring several individual network connections from one main harness interface.
Vehicle Electronic Control Units
Suitable for compatible vehicle domain controllers, electronic control units and communication modules. The separate branch cables allow individual MATEnet connections to be routed toward different installation positions within the vehicle.
Automotive Camera and Sensor Connectivity
Support wiring integration for compatible automotive camera modules and sensor electronics equipped with MATEnet interfaces. The individual branches help accommodate different device positions without requiring separate main H-MTD cable assemblies.
Prototype Development and Custom Harness Projects
For vehicle development, laboratory setups and OEM wiring projects, Premier Cable supports custom cable lengths, connector combinations and branch configurations based on customer drawings or samples. This provides greater flexibility when standard cable dimensions do not match the actual equipment layout.
Product Drawing
Product FAQ
Which Rosenberger H-MTD connector is used ?
The main connector is the original Rosenberger E6K10D-1CAZ5-Z H-MTD Jack Z Code.
Which TE MATEnet connector is used ?
All four branch connectors use the TE MATEnet Plug Z Code, part number 2302461-9.
How many MATEnet outputs does this assembly provide ?
The assembly has four individual MATEnet outputs connected to one H-MTD main interface.
What cable is used in this assembly ?
The cable assembly uses G&G 2Speed 251 10G Ethernet cable with a nominal impedance of 100Ω.
Can the cable assembly be customized ?
Yes. Premier Cable supports customized cable lengths, connector combinations and wiring configurations based on engineering drawings or reference samples.
Hot Tags: h-mtd to matenet ethernet breakout cable, China h-mtd to matenet ethernet breakout cable manufacturers, suppliers, factory
