HFM Mini-FAKRA Automotive Coaxial Cable
This HFM Mini-FAKRA automotive coaxial cable provides a compact single-channel connection between cameras, ECUs, vehicle modules, and development equipment.
Three connector configurations are available: female-to-female, male-to-male, and male-to-female. This allows the same cable family to support direct interface matching, cable extension, and prototype harness connections without changing the equipment-side interface.
Designed around the compact HFM High-Speed FAKRA-Mini architecture, the cable is suited to ADAS cameras, autonomous driving development, vehicle validation, and other high-speed automotive coaxial connections where installation space and flexible interface matching are important.
Product Specifications
| Specification | Details |
|---|---|
| Impedance | 50 Ohm |
| Signal Structure | Coaxial |
| Cable Length | Customizable |
| Connector Type | HFM Mini-FAKRA |
| Channel | Single Channel |
| Product Type | Automotive Coaxial Cable |
| Application | ADAS Camera / ECU / Test System |
| Configurations | Female-Female / Male-Male / Male-Female |
Available Configurations
HFM Mini-FAKRA Female to Female Cable
Female to Female Interface Bridge
Uses HFM Mini-FAKRA female connectors at both ends to connect compatible male interfaces.
This configuration is particularly useful for module-to-module connections, bench setups, and prototype systems where two HFM Mini-FAKRA male interfaces need to be bridged without changing the existing equipment connectors.
HFM Mini-FAKRA Male to Male Cable
Male to Male Interface Connection
Uses HFM Mini-FAKRA male connectors at both ends for equipment fitted with corresponding female interfaces.
The same gender structure provides a direct single channel coaxial connection for vehicle modules, development hardware, and test equipment requiring male cable-side interfaces.
HFM Mini-FAKRA Male to Female Cable
Male to Female Extension Connection
Combines HFM Mini-FAKRA male and female interfaces in one assembly, making this version particularly suitable for extending an existing compatible HFM connection.
It allows camera or module positioning to be adjusted without replacing the complete vehicle harness, which is useful during prototype development and validation.
Typical Applications
Product Features
Single Channel HFM Architecture
One dedicated coaxial channel provides a direct point-to-point connection between compatible HFM Mini-FAKRA interfaces.
Three Connector Configurations
Female-to-female, male-to-male, and male-to-female options cover different mating and extension requirements within one product family.
Compact Mini-FAKRA Interface
The HFM Mini-FAKRA architecture provides a smaller connector footprint for space-constrained automotive cameras, ECUs, and electronic modules.
50 Ohm Coaxial Interface
The cable family uses the 50 Ohm HFM coaxial interface for compatible automotive high-frequency and high-speed data connections.
CORE BENEFITS
Match Different Equipment Interfaces
Three connector combinations make it easier to connect equipment with different male and female HFM mating interfaces.
Extend Existing Camera Connections
The male-to-female configuration allows compatible camera or module links to be extended without replacing the complete harness.
Reduce Additional Adapters
Selecting the required connector gender at each end can eliminate separate gender-changing coaxial adapters in development and test setups.
Simplify Prototype Reconfiguration
Different cable configurations allow cameras, ECUs, and test modules to be repositioned as vehicle development layouts change.
Connection & Ordering Notes
HFM Mini-FAKRA connectors are available in different genders and mechanical codings. The required connector configuration should be matched to the mating interfaces on the target equipment.
Please confirm:
- Connector gender
- HFM coding
- Cable length
- Cable type
- Connector part number
- Target equipment
- Labeling requirements
- Order quantity
For development projects, connector photos, mating connector part numbers, equipment interface drawings, or an existing cable sample can be provided for interface confirmation.
Product FAQ
Q1. What configurations are available?
A1. Three configurations are available: HFM Mini-FAKRA female-to-female, male-to-male, and male-to-female.
Q2. Which version is suitable for cable extension?
A2. The male-to-female version is typically used to extend an existing compatible HFM Mini-FAKRA connection while maintaining opposite mating interfaces.
Q3. Can the female-to-female version connect two male interfaces?
A3. Yes, provided both equipment interfaces use compatible HFM Mini-FAKRA male connectors with matching coding and electrical requirements.
Q4. Is this cable suitable for ADAS cameras?
A4. Yes, when the HFM coding and system requirements match the camera and processing equipment. HFM is used in automotive driver assistance and autonomous driving applications.
Q5. Can the connector coding and cable length be customized?
A5. Yes. Connector configuration, HFM coding, cable type, cable length, and labeling can be specified according to the target equipment and project requirements.
Hot Tags: hfm mini fakra cable, China hfm mini fakra cable manufacturers, suppliers, factory
