Type-C waterproof panel extension cable with female-to-male design, tethered-cap and capless options, for industrial PCs, control cabinets, HMI, and test equipment.
The Type-C Industrial Waterproof Panel Extension Cable series is designed to extend an internal USB Type-C interface to the external panel of an industrial enclosure, control cabinet, or equipment chassis.
The basic connection architecture is:
P1: Panel-mount USB Type-C female P2: Cable-mounted USB Type-C male
An external USB-C device connects to the fixed panel female port, while the internal Type-C male plug connects to an industrial PC, embedded computer, controller, or other USB-C-equipped device.
Unlike a conventional Type-C extension cable, the panel-mount structure integrates the USB-C interface directly into the equipment enclosure.
Two primary configurations are available:
Product 1: Type-C waterproof female-to-male panel extension cable with tethered screw cap
The supplied drawing shows a D-shaped anti-rotation cutout with an Ø20.8 mm arc and 19.40 mm width.
Product 1 is a Type-C waterproof female-to-male panel extension cable with a tethered screw cap.
Its connection architecture is:
Type-C panel female → extension cable → Type-C male
The external panel interface incorporates a tethered screw-on protective cap. When the port is required, the cap can be removed while remaining attached to the connector body through the tether.
According to the supplied installation drawing:
Arc diameter: Ø20.8 mm D-shaped cutout width: 19.40 mm
This is not a simple Ø20.8 circular hole. The anti-rotation flat should be included in the equipment panel cutout.This configuration is suitable for industrial control equipment, industrial PCs, embedded systems, test instruments, outdoor equipment enclosures, and applications where an unused Type-C port requires physical coverage.
Type 2
Type-C Capless Rear-Lock Panel Extension Cable
Product 2 is a Type-C female-to-male round panel extension cable with a capless rear-locking structure.
Its connection architecture is:
Type-C round panel female → extension cable → Type-C male
The Type-C female interface remains directly accessible without a separate protective cap.
Compared with Product 1, it is better suited to continuously connected devices, frequent Type-C access, already-protected equipment areas, industrial computer service ports, and test equipment.
According to the supplied installation drawing:
Main circular cutout: Ø22.50 mm Top locating slot width: 3.30 mm Overall cutout height: 24.00 mm
The 3.30 mm locating slot provides orientation and anti-rotation positioning and should be included in the equipment panel machining profile.
Product Features
01
Integrated Type-C Female-to-Male Extension
Both products use a Type-C panel female-to-male extension architecture, allowing an existing internal USB-C interface to be relocated to the equipment panel.
02
Two Interface Protection Options
Product 1 uses a tethered screw cap for physical port coverage, while Product 2 uses a capless structure for direct and frequent access.
03
Anti-Rotation Panel Cutouts
Product 1 uses a D-shaped anti-rotation flat, while Product 2 uses a top locating slot. Both designs help maintain connector orientation after installation.
04
Designed for OEM Panel Integration
The fixed panel structure allows OEM manufacturers to standardize USB-C port location, panel cutout, and installation architecture.
Why Is This Product Needed ?
Industrial PCs, embedded controllers, test instruments, and other equipment increasingly use USB Type-C interfaces, but internal ports are often inconvenient for operators to access.
Routing a conventional Type-C extension cable through an enclosure opening may leave the interface unsecured, expose the internal host port to external mechanical stress, and create poor cable management.
The Type-C Industrial Waterproof Panel Extension Cable creates a fixed external USB-C access point while retaining a standard Type-C connection to the internal host.
Typical Applications
Test, Measurement, and R&D Equipment
Provides a fixed Type-C interface for test benches, laboratory instruments, data acquisition equipment, and R&D platforms.
HMI and Industrial Display Equipment
Suitable for USB-C connections on industrial touchscreens, HMI terminals, and display control systems.
Core Performance Advantages
01
External Access to Internal Type-C Ports
Operators can access the Type-C connection directly from the equipment panel without repeatedly opening the enclosure.
02
Reduced Mechanical Stress on Internal Host Ports
External mating occurs at the panel connector, helping isolate the internal host port from routine external handling.
03
Improved OEM Interface Standardization
Different internal computers or controllers can be used while maintaining a consistent external Type-C panel interface.
Frequently Asked Questions
Product FAQ
What Is the Main Difference Between the Two Products ?
The main differences are the protective structure and panel cutout. Product 1 uses a tethered screw cap with an Ø20.8 D-shaped cutout, while Product 2 uses a capless design with an Ø22.50 circular cutout and 3.30 mm locating slot.
Where Is the Capless Version Suitable ?
The capless version is suitable for continuously connected ports, frequent access, already-protected interface areas, and indoor industrial equipment.
Can Cable Length and Type-C Configuration Be Customized ?
Yes. Cable length, data configuration, power requirements, CC wiring, and target protocol can be evaluated for OEM projects.
Are Wholesale and OEM Services Available ?
Yes. The products are suitable for wholesale Type-C waterproof extension cables, custom Type-C panel connectors, industrial Type-C connector manufacturer projects, OEM USB-C panel cables, and custom Type-C cable assemblies.
Contact Premier Cable for Your Custom Harness Project
Send us your connector part number, pinout, cable specification, length, application and quantity. Our team can support prototype samples and volume production.
