Product Introduction
The newly developed Premier Cable PCM-SHM-0011 provides a reliable 50 Ohm RF connection for antennas, wireless equipment, and communication systems using TNC and N-type interfaces.
The PCM-SHM-0011 TNC to N RF Coaxial Cable Assembly provides a practical connection between RF equipment using TNC and N-type interfaces. Built with 50 Ohm RG58 coaxial cable, it supports stable signal transmission for antenna connections, wireless communication equipment, RF modules, base stations, and system integration.
The assembly features male TNC and N-type connectors for direct equipment-to-antenna or device-to-device connectivity. Its flexible RG58 construction makes routing and installation easier in communication cabinets, test setups, and other RF installations. Standard configurations are available for common applications, with custom cable lengths and connector options available to support OEM projects and specific installation requirements.
Product Construction
The cable assembly combines an RG58 coaxial cable with TNC and N-type male connectors, featuring reliable termination, strain relief, and conductive contact components for stable RF signal transmission and secure connectivity.
RG58 Coaxial Cable
The main transmission cable features a center conductor, dielectric insulation, shielding layer, and protective outer jacket, providing reliable signal transmission for RF and wireless communication applications.
TNC Male Connector
Provides a secure connection to RF equipment with a TNC female interface, making it suitable for communication devices, RF modules, and related equipment.
N-Type Male Connector
Designed for connection with N-type female interfaces commonly found on antennas, base stations, wireless communication equipment, and RF systems.
Connector Termination & Strain Relief
Reinforced cable-to-connector termination and strain-relief protection help reduce stress caused by bending, pulling, and repeated handling, improving overall mechanical reliability.
Conductive Contact Components
Precision metal contact components provide consistent electrical contact between connected interfaces, supporting reliable RF signal transmission and connection stability.
Specification
| Parameter | Specification |
|---|---|
| Impedance | 50 Ω |
| VSWR | < 1.5 |
| Connector 1 | TNC Male |
| Connector 2 | N Type Male |
| Contact Plating | Gold Plated |
| Part Number | PCM-SHM-0011 |
| Connector Configuration | TNC Male to N Male |
| Cable | RG58 50 Ohm Coaxial Cable |
| Cable Assembly Type | RF Coaxial Cable Assembly |
| Cable Length | 6 ft (1828.8 ± 20 mm) |
| Product Name | TNC Male to N Male RG58 RF Coaxial Cable Assembly |
Product Display
How It Works
- The PCM-SHM-0011 provides a reliable 50-ohm RF connection between equipment using TNC and N-type interfaces. Its RG58 coaxial cable carries the RF signal through the center conductor, while the surrounding dielectric and shield help maintain signal integrity and reduce interference from nearby electrical equipment.
- The TNC male connector provides a secure threaded connection on one end, while the N male connector allows direct integration with antennas, RF modules, wireless communication equipment, test instruments and other 50-ohm systems. This configuration is especially useful when two devices use different RF connector standards or when an existing antenna connection needs to be extended.
- With a specified VSWR of less than 1.5, the cable assembly is designed to minimize signal reflections caused by impedance mismatch, helping support stable RF transmission and consistent system performance.
Key Features & Benefits
Our Advantages
The PCM-SHM-0011 TNC Male to N Male RG58 RF coaxial cable assembly is designed for stable 50-ohm RF signal transmission between antennas, wireless communication equipment, radio devices and test systems. It combines RG58 coaxial cable with TNC and N-type male connectors to provide a direct interface conversion solution without additional adapters. With a VSWR below 1.5, the cable helps reduce signal reflections and supports consistent RF performance. The standard 6 ft cable length offers flexible equipment placement, while gold-plated contacts contribute to reliable conductivity and connection stability.
50Ω Impedance
Compatible with common RF and antenna systems
VSWR < 1.5
Helps reduce reflected signal energy
TNC Male to N Male
Direct RF interface conversion and extension
RG58 Cable & Gold-Plated Contacts
Stable Signal Transmission
Typical Applications
The PCM-SHM-0011 TNC Male to N Male RG58 RF coaxial cable assembly is designed for a wide range of 50-ohm RF connection and extension applications. It can be used to connect antennas, wireless communication equipment, RF modules, radio systems and test devices where TNC and N-type interfaces are required. The cable is also suitable for antenna relocation, system upgrades, interface conversion and OEM RF equipment integration, providing a practical solution for reliable signal transmission between different RF devices.
Wireless Communication Equipment: RF modules, wireless terminals and communication devices.
Antenna Connections & Extensions: External antennas, antenna relocation and installation adjustments.
Wi-Fi & Wireless LAN Systems: Compatible RF connections for selected Wi-Fi and wireless networking equipment.
RF & Radio Equipment: Base stations, radios, RF test equipment and signal transmission systems.
OEM & System Integration: Suitable for RF equipment upgrades, interface conversion and custom cable assemblies.
Why Choose Us
why choose our PCM-SHM-0011
The PCM-SHM-0011 features TNC Male to N Male connectors, RG58 50 Ohm coaxial cable, VSWR < 1.5, and gold-plated contacts for stable RF transmission and flexible antenna or equipment connections.
- TNC Male to N Male – Direct connection between two common RF interfaces.
- RG58 50 Ohm Coaxial Cable – Suitable for standard RF and antenna applications.
- VSWR < 1.5 – Helps maintain stable RF transmission with reduced signal reflection.
- Flexible RF Integration – Ideal for antennas, wireless equipment, system upgrades and OEM applications.
FAQ
Q1: What is the PCM-SHM-0011 TNC Male to N Male RG58 coaxial cable used for?
A1: It is used for RF signal transmission between TNC and N-type devices, including antennas, wireless communication equipment, RF modules, radio systems, and test instruments.
Q2: Is this cable compatible with 50 Ohm RF systems?
A2: Yes. It uses RG58 50 Ohm coaxial cable and is suitable for common 50 Ohm RF, antenna, and wireless communication systems.
Q3: What is the VSWR of the PCM-SHM-0011?
A3: The specified VSWR is less than 1.5, helping reduce signal reflection and maintain stable RF transmission.
Q4: Can the cable length and connector configuration be customized?
A4: Yes. Cable length, connector configuration, labeling, and other assembly requirements can be customized for OEM applications.
Q5: Can this cable be used for antenna extension and RF equipment upgrades?
A5: Yes. It is suitable for antenna extension, interface conversion, equipment relocation, and RF system upgrades.
Products Drawing
Get In Touch
Hot Tags: tnc to n rg58 rf cable assembly, China tnc to n rg58 rf cable assembly manufacturers, suppliers, factory
