Products Description
PCM-0980 Plug-In XT60 4-Port Female Output Hub is a compact no-cable XT60 adapter designed to expand one XT60 female power interface into four XT60 female output sockets. It is suitable for RC battery charging boxes, drone field power stations, battery test benches, portable DC power kits and custom XT60 power expansion projects.
The main side uses one XT60 male plug, which can be inserted directly into an XT60 female output port, charger outlet, battery adapter or DC power module. The top side provides four XT60 female socket ports, allowing multiple XT60 male charging leads, test cables, accessories or DC loads to be connected in one fixed position.
Unlike loose Y-splitter cables, this molded XT60 hub keeps the connection points in a straight and organized layout. The compact body helps save space inside charging cases, workbench power setups and portable field power boxes, while the internal UL1569 / 1007 14AWG jumper wiring supports low-voltage DC distribution applications.
Key Features
- Plug-in XT60 male input for direct connection to an XT60 female power port
- Four XT60 female sockets for output expansion and multi-device connection
- No-cable molded body for clean, compact and fixed-position installation
- Internal UL1569 / 1007 14AWG jumper wiring
- Useful for replacing several loose XT60 splitter leads in charging boxes
- Suitable for RC, drone, battery testing, DC output expansion and custom power projects
- Custom port quantity, connector direction and housing design available upon request
- RoHS compliant design
Technical Specifications
| Part Number | PCM-0980 |
| Product Type | Plug-In XT60 4-Port Female Output Hub |
| Input Side | XT60 Male Plug |
| Output Ports | 4 × XT60 Female Socket Ports |
| Internal Jumper Wire | UL1569 / 1007 14AWG |
| Housing Style | Compact Molded Adapter Body |
| Approx. Body Length | 92 mm |
| Electrical Test | 100% open, short and miswire test |
| Insulation Resistance | 10 MΩ min. at DC 300V |
| Compliance | RoHS Compliant |
Recommended Applications
- RC battery charging case output expansion
- Drone field charging and battery service stations
- XT60 female port to four female socket expansion
- Battery discharge fixtures and DC load testing benches
- Portable DC power boxes and field repair kits
- Compact XT60 output hub for custom equipment panels
- Portable power station and Anker SOLIX-style XT60 interface projects where polarity, voltage and current rating are confirmed
How It Works
In a typical setup, the XT60 male plug side is inserted into a female XT60 output from a charger, battery box, portable DC power source or test power module. The four XT60 female sockets then act as accessible output points for multiple XT60 male plugs, helping keep battery charging leads, DC accessories or test cables organized.
Before use, please confirm polarity, total current, connector rating and system protection. For battery charging or parallel connection applications, use a suitable charger, fuse, current control device or power management system.
Drawing
Hot Tags: plug-in xt60 4-port female output hub for rc battery charging, China plug-in xt60 4-port female output hub for rc battery charging manufacturers, suppliers, factory
