Description
Send Inquiry
Products Description
Amass XT30 Female to Open End Cable
The Amass XT30 female-to-open-end cable is a highly versatile power connection accessory designed for applications requiring custom wiring. Featuring a high-quality Amass XT30 female connector on one end and pre-tinned bare wire leads (typically red and black, approximately 5–10 cm in length) on the other, it allows users to solder the wires directly to circuit boards, batteries, or devices, or connect them to terminal blocks and power modules according to specific needs. Suitable for use in drone ESC connections, internal power distribution for robots, battery pack modifications, and the fabrication of test fixtures, this product offers maximum customization flexibility for DIY enthusiasts and engineers alike.
Specification
| Product Name | Amass XT30 Female to Open End Cable |
| Drawing # | PCM-HD-0283 |
| Connector A | XT30UD-M Female |
| Connector B | Open End |
| OD | 5.8mm |
| Wire | 16AWG*2C |
| Cable Length | 1m |
Applications
1. Direct Connection to Electronic Devices
Many electronic modules (such as step-down converters, motor driver boards, and LED strip controllers) feature only solder pads or through-holes rather than pre-installed connectors. You can solder the bare wire ends directly to these devices and connect the other end to a battery or power supply via the XT30 connector, eliminating the need for extra adapters.
2. Internal Power Wiring
In compact devices like 3D printers, robots, and drone frames, there is often insufficient space for additional socket panels. This cable allows you to solder the bare wire ends directly to the power input pads on a power distribution board or main control board, while mounting the XT30 female connector to the chassis as a charging or power input port-resulting in a neat, secure setup.
3. DIY Battery Pack Assembly
When assembling custom lithium battery packs, leads often need to be soldered to the protection circuit board (PCB) or battery terminals. You can solder the bare wire ends (positive and negative) to the battery pack or PCB output terminals and attach the XT30 female connector to the other end, creating a reliable, integrated charging/discharging interface for your custom battery pack.
4. Testing and Test Fixtures
Engineers testing power products often need to create temporary test adapter cables. The bare wire ends of this cable can be easily connected to the binding posts of electronic loads, multimeters, or power monitoring modules, while the XT30 female connector serves as a universal interface for quickly connecting to the device under test (such as drone batteries or chargers), significantly boosting testing efficiency.
Drawing
Hot Tags: Amass XT30 Female to Open End Cable, China Amass XT30 Female to Open End Cable manufacturers, suppliers, factory
