ECT Mini Fakra A Code to Four Fakra Cable

This Premier Cable assembly connects an ECT Mini Fakra 818018733 four cavity female connector to four individual ECT Fakra 818010602 straight female connectors for automotive camera coaxial wiring.

The black A Code Mini Fakra end uses a waterproof structure. The four Z Code Fakra ends are non-waterproof and require protected connection locations. Separate branches allow the four coaxial paths to follow different installation routes.

Connector and Cable Specifications

Parameter	Specification
Connector Brand	ECT
Branch Connector Coding	Z Code
Branch Connector Protection	Non-waterproof
Main Connector Protection	IP67 Waterproof type
Cable Family	RTK031 coaxial cable
Main Connector Coding	A Code, black housing
Listed Cable References	DACAR 302-4, ECT302LL
Branch Connectors	ECT Fakra 818010602 straight female × 4
Application	Automotive camera coaxial interconnection
Main Connector	ECT Mini Fakra 818018733 four cavity female
Product Type	Four branch automotive coaxial cable assembly
Available Lengths	0.1 m, 0.5 m, 1 m, 1.5 m, 2 m, 2.5 m, 3 m, 4 m, 5 m

One Grouped Interface, Four Separate Branches

IP67 Waterproof A Code Main Connector

ECT Mini Fakra 818018733 groups four coaxial contacts in a black four cavity female housing. Confirm A Code mating compatibility and cavity assignment before installation.

Four Accessible Fakra Connections

Four ECT 818010602 Z Code straight female connectors terminate the individual branches. Each connection can be accessed separately during assembly, inspection and maintenance.

Camera Harness Routing and Installation

Grouped Connection at the Equipment Interface

The four cavity Mini Fakra connector brings four coaxial paths into a single mating housing. The opposite ends remain separate for connection to the corresponding Fakra equipped camera harnesses or equipment ports.

Protection Matched to Each Connection Location

Position the non-waterproof Fakra ends inside a protected enclosure or installation area. Confirm sealing requirements at the Mini Fakra mating interface rather than treating the complete assembly as waterproof.

Branch Identification for Service Access

Define the relationship between each Mini Fakra cavity and its Fakra branch on the assembly drawing. Optional branch labels give technicians a clear reference when connecting or replacing individual camera paths.

Cable Length and Branch Layout

Listed lengths range from 0.1 m to 5 m. Choose the length according to the actual routing distance, connector access and installation clearance. Confirm how the selected length is measured before ordering.

Premier Cable accepts custom length inquiries. Specify individual branch lengths, breakout position, cavity mapping and label requirements for drawing review.

Notes: Confirm pin assignment, channel mapping, mating connector coding and connection protection requirements before ordering.

Product FAQ

Is the entire cable assembly waterproof?

The 818018733 Mini Fakra connector is a waterproof type. The four 818010602 Fakra connectors are non-waterproof. A complete assembly IP rating has not been specified.

Does this assembly split one camera signal into four?

It is a four branch coaxial breakout assembly. Each branch corresponds to a contact in the four cavity connector according to the confirmed wiring drawing. It is not specified as a signal duplication device.

Can all four branches have different lengths?

Custom branch lengths can be reviewed. Send a drawing with each connector position, branch length and the required breakout location.

What should be confirmed for an automotive camera project?

Confirm the mating connector part numbers, coding, cavity mapping, cable model and routing dimensions. The camera link requirements and permitted cable length also need review before selecting the final assembly.