Rosenberger H-MTD Multi Port To LEONI Dacar Ethernet Cable

Zonal vehicle architectures push multiple 10 Gigabit Ethernet channels out of one H-MTD multi port connector. The 2 port, 4 port and 6 port housings carry 2, 4 and 6 independent channels respectively. Running separate channels out of a multi port housing requires a factory made fan out harness, because hand built splitters fail the 100 ohm impedance and 360 degree shielding tests at 10G speeds.This harness covers the full range from 2 port, 4 port and 6 port female, either fanned out to single port females or extended to the same port size. The cable is original LEONI Dacar 686-3, a 10G shielded line built to hold 100 ohm differential impedance on every channel.

Genuine Rosenberger H-MTD multi port female connectors, available as 2 port E6K10B-1CAZ5-Z, 4 port E6K10D-1CAZ5-Z or 6 port E6K10F-1CAZ5-Z, water blue Z coded housing, factory fanned out to single port females or extended to the same port size on the other end. The cable is original LEONI Dacar 686-3 fully shielded 10G automotive Ethernet. Available in 4 lengths from 0.5 m to 3 m. Built for zonal architectures that must break one H-MTD multi port connector out to multiple single port sensors, or extend a multi port to multi port link.

Whether you are breaking a 2 port, 4 port or 6 port H-MTD female out to single port sensors, or extending a multi port to multi port link, this harness has the configuration you need. Pick the port count and fan out option that matches your ECU and devices.

Product Specifications

Available Configurations

2 Port Female to 2x Single Port Female

The 2 port Z coded female, E6K10B-1CAZ5-Z, plugs into a factory 2 port male pigtail, and the cable fans out to two H-MTD single port Z coded female receptacles, E6K10A-1CAZ5-Z, water blue.

Use it when the two 10G channels need to reach two separate single port female devices, such as two cameras or two radar sensors. Each single port female accepts a standard H-MTD male pigtail. The 0.5 m to 3 m length range covers dashboard to sensor routing.

2 Port Female to 2 Port Female

Both ends are the H-MTD 2 port Z coded female, E6K10B-1CAZ5-Z, water blue,Use it as a 2 port to 2 port extension when a factory 2 port male pigtail is too short, or when bridging two 2 port male panel receptacles.

The female to female gender keeps both factory pigtails unchanged, and the Dacar 686-3 shielded cable keeps both 10G channels clean. The 0.5 m to 3 m range covers tight ECU jumps to across cabin runs.

4 Port Female to 4x Single Port Female

The 4 port Z coded female, E6K10D-1CAZ5-Z, plugs into a factory 4 port male pigtail, and the cable fans out to four H-MTD single port Z coded female receptacles, E6K10A-1CAZ5-Z, water blue.

Use it when the four 10G channels need to reach four separate single port female devices, such as four cameras or four radar sensors. Each single port female accepts a standard H-MTD male pigtail. The 0.5 m to 3 m length range covers dashboard to sensor and trunk routing.

4 Port Female to 4 Port Female

Both ends are the H-MTD 4 port Z coded female, E6K10D-1CAZ5-Z, water blue.Use it as a 4 port to 4 port extension when a factory 4 port male pigtail is too short, or when bridging two 4 port male panel receptacles.

The female to female gender keeps both factory pigtails unchanged, and the Dacar 686-3 shielded cable keeps all four 10G channels clean. The 0.5 m to 3 m range covers tight ECU jumps to full trunk runs.

6 Port Female to 6x Single Port Female

The 6 port Z coded female, E6K10F-1CAZ5-Z, plugs into a factory 6 port male pigtail, and the cable fans out to six H-MTD single port Z coded female receptacles, E6K10A-1CAZ5-Z, water blue.

Use it when the six 10G channels need to reach six separate single port female devices, such as six cameras or six radar sensors. Each single port female accepts a standard H-MTD male pigtail. The 0.5 m to 3 m length range covers dashboard to sensor and trunk routing.

6 Port Female to 6 Port Female

Both ends are the H-MTD 6 port Z coded female, E6K10F-1CAZ5-Z, water blue.Use it as a 6 port to 6 port extension when a factory 6 port male pigtail is too short, or when bridging two 6 port male panel receptacles.

The female to female gender keeps both factory pigtails unchanged, and the Dacar 686-3 shielded cable keeps all six 10G channels clean. The 0.5 m to 3 m range covers tight ECU jumps to full trunk runs.

Applications 

Closing line: because every channel runs through factory terminated H-MTD connectors on the same shielded Dacar 686-3 cable, the 10G links stay impedance matched end to end.

Professional Services

Connector customization: other H-MTD variants quoted on request.

Fast sampling: small batch samples in days, production volumes on a confirmed lead time.

Length customization: 0.5 m to 3 m in stock. Non standard cut lengths built to your drawing.

Configuration customization: 6 options as shown. Other H-MTD port counts and gender combinations quoted on request.

Quality before dispatch: 100 percent per channel continuity and shielding continuity tested on every assembly before dispatch.

OEM and bulk support: ADAS integrators, zonal ECU developers and R and D labs get volume pricing and private label packaging.

Product FAQ

Q1: What data rate does it support?

Yes. We support custom lengths from 0.5 m to 3 m and beyond, and can quote other H-MTD port counts and gender combinations on request. Send us your connector photos and target length, and we will quote the matching harness.

Q2: Is this a genuine Rosenberger H-MTD connector?

The port count is the number of independent 10G channels in one housing. The 2 port carries 2 channels, the 4 port carries 4 channels, and the 6 port carries 6 channels. Pick the port count that matches the number of channels on your ECU.

Q3: What is the difference between the 4 port and single port H-MTD?

Config 1 fans a 2 port out to two single port females. Config 2 extends 2 port to 2 port. Config 3 fans a 4 port out to four single port females. Config 4 extends 4 port to 4 port. Config 5 fans a 6 port out to six single port females. Config 6 extends 6 port to 6 port.

Q4: What is the difference between the six configurations?

Yes. The multi port female housings are genuine Rosenberger H-MTD, water blue Z coded, part numbers E6K10B-1CAZ5-Z for 2 port, E6K10D-1CAZ5-Z for 4 port and E6K10F-1CAZ5-Z for 6 port. The cable is original LEONI Dacar 686-3 fully shielded 10G automotive Ethernet.