What is label inspection machine?

Apr 30, 2025

Leave a message

 

info-1016-675

 

 

"Label inspection machine" is a device used to automatically check the quality of product labels. It is widely used in packaging lines in food, beverage, medicine, cosmetics, electronics and other industries. Its main function is to detect whether the label is correctly attached, the position is accurate, the content is complete, whether there is a wrong label, missing label, skew, bubble, wrinkle, stain, color deviation or barcode error.

Main components:


1. Industrial camera (HD or high speed)
2. Light source system (for lighting and contrast enhancement)
3. Image processing software (AI visual algorithm or traditional image processing)
4. Conveying system or integrated in the production line
5. Alarm/rejection device

 

In a Label Inspection Machine system, the following types of cables and accessories are usually used to connect industrial cameras, sensors, lighting, control systems and other components:

 

1. Industrial camera connection cable

 

  • GigE Vision camera:

 

Use Cat6a/Cat7 RJ45 industrial Ethernet cable (shielded)
 

⮕ Typical brands: Basler, IDS, Daheng, Cognex

 

  • USB3 Vision camera:

 

Use USB 3.0/3.1 A to Micro-B cable with locking nut type industrial interface

 

  • Camera Link camera (if it is a high-speed system):

 

Use Camera Link cable with SDR/HDR/MDR connector

gige vision camera

2. Light source power cable and control cable

 

  • Common interface: M8 / M12 Round connector cable (DC power control)

 

  • Some high-brightness LED light sources also require PWM control signal cable (with shielding)

 

  • Lighting controller connection cable: may be D-sub, Phoenix terminal cable, RJ45 control cable

 

3. Sensor cable (for triggering/positioning)

 

  • Photoelectric sensor, color sensor, etc.: Use M8/M12 3-pin or 4-pin connector cable (PNP/NPN output)

 

  • Encoder, position detector: May use multi-core shielded cable with D-sub or round industrial connector

info-3000-963

4. PLC/controller communication cable
 

  • RS-232/RS-485 communication cable (DB9, male to male, female to female)

 

  • Or Ethernet (industrial Ethernet) cable → docking with the main control system

 

  • If the system is EtherCAT/Profinet bus, the corresponding type of shielded network cable (with M12 X-coded, RJ45, etc.) is also required

 

5. Display and human-machine interface connection cable
 

  • HDMI/VGA/DP Cable (connecting industrial computer and display)

 

  • USB cable (connecting touch panel)

info-3600-1200

6. Power cable (AC/DC)

 

  • DC power supply part: use standard DC power plug cable (5.5×2.1mm / 5.5×2.5mm) or M8/M12 power cable

 

  • AC part: standard IEC C13, C14 power cable or customized terminal cable

 

Other accessories may also include:

 

  • Junction box (such as Phoenix, Weidmüller)
  • Distributor (such as M12 Y-type or T-type connector)
  • Rail power module, relay
  • Waterproof connector, anti-interference filter

info-3000-1000

E-mail

hello@yourdomain.com

 

 

 

Send Inquiry