Product Details:
AISG RET Cable 8 Pin M16 Connector supports 12A maximum current, 250V maximum voltage, and contact resistance of 5 milliohms. The number of optional cores is up to 12 cores, and the maximum current per contact is 2 amps. The product adopts injection molding technology to ensure stability and sealing. It can pass the salt spray test for more than 720 hours, and the protection level reaches IP68. Adapt to various harsh outdoor environments and corrosive environments. This product complies with AISG electrically adjustable antenna equipment standards and is compatible with RET cables from Andrew, Catherine, Scala, Ericsson, Alcatel-Lucent (ALU), Huawei, Kerus, RFS, KMW and other companies.
|
Protocol |
AISG 1.1 , AISG 2.0 |
|
Standard |
Antenna Interface Standards Group, IEC 60130-9 |
|
Cable Spec. |
2 x 0.25 sq. mm (24 AWG) twisted pair with 4 x 0.75 sq. mm (20 AWG) stranded |
|
Available Sizes |
OEM or 1m, 2m |
|
Brand |
Premier Cable , OEM |
|
Connector |
8-Pin Din Female , Male, IEC 60130-9 |
|
Certificate |
UL, Rohs, Reach |
|
Compliance |
Ratings IP67 |
|
Compatible Brand |
Kathrein, Ericsson, Nokia (Alcatel-Lucent), Commscope, Radio Frequency Systems, Huawei, Comba. |
AISG M16 8 Pin connectors are mainly used for antennas and related equipment in the communications industry to achieve remote monitoring and control of base station antennas. The following are some communications industry equipment that often use AISG connectors:
Base station antenna: AISG connectors are commonly found in the antenna systems of wireless communication base stations. They are used to monitor and adjust antenna parameters to optimize signal transmission performance.
Antenna Tuner: The antenna tuner communicates with the base station through the AISG connector to adjust the impedance matching of the antenna and improve signal transmission efficiency.
Remote Electrical Tilt (RET) System: The RET system uses an AISG connector to adjust the antenna's tilt via remote control to optimize signal coverage.
Tower Top Unit (TTU): A TTU is a device installed on top of a communication tower to manage antennas and other related equipment. AISG connectors can be used for communication and control with TTU.
Base Station Control Unit (BCU): A Base Station Control Unit is a controller used to monitor and manage base station equipment and may communicate with other equipment using AISG connectors.
Adjustable antenna support systems: Some adjustable antenna support systems, used to adjust the direction and parameters of the antenna, may also include AISG connectors.
Generally speaking, AISG connectors are used in the communications industry to implement standardized control and monitoring interfaces for antennas and related equipment to improve system manageability and performance.
Hot Tags: remote electrical tilt ret control cable, China remote electrical tilt ret control cable manufacturers, suppliers, factory, remote electrical tilt power supply cable, huawei aisg to db9 cable, aisg 2 0 ret jumper cable, aisg system cable tma and acu, rru rcu rrh cable aisg to db15, aisg cable m16 connector
