Description

Send Inquiry

The USB to CAN Converter Cable features a USB interface and an M8 A-Code 4-Pin Male connector, providing a communication interface between computers and CAN bus industrial devices.

The converter supports CAN 2.0A and CAN 2.0B protocols, with CAN communication rates ranging from 40 Kbps to 1 Mbps. Its compact design, USB-powered operation and interference-resistant communication make it suitable for industrial automation, equipment monitoring, building security systems and CAN bus diagnostics.

Product Specifications

Parameter	Specification
Product Type	USB to CAN Converter
USB Interface	USB
CAN Connector	M8 A-Code 4-Pin Male
Module Dimensions	67.7 x 17.9 x 9.7 mm
Installation	Direct USB Plug-In
Protection Rating	IP65
Power Supply	5VDC+0.25V
Operating Current	0.5A +2%
Power Ripple Noise	<20 mV
USB Speed	12 Mbps (Full Speed)
USB Standard	USB 2.0 Full Speed, USB 1.1 Compatible
USB Frame Interval	>1 ms
Frame Transmission Capacity	>4,000 Frames/s
CAN Baud Rate	40 Kbps-1 Mbps
CAN Protocol	CAN 2.0A/CAN 2.0B
CAN Standard	IS0/DIS 11898

Pin Assignment

Signal	Description
CAN-H	CAN High Signal
CAN-L	CAN Low Signal
GND	Signal Ground
PE	Protective Earth

Product Features

USB to CAN Conversion - Enables communication between USB host devices and CAN bus equipment.

M8 Industrial Connector - Features an M8 A-Code 4-Pin Male connector for compatible industrial devices.

CAN 2.0A/2.0B Support - Supports CAN communication rates from 40 Kbps to 1 Mbps.

Compact USB-Powered Design - Eliminates the need for a separate converter power supply.

Convenient Installation - Direct USB connection simplifies equipment setup and field maintenance.

Typical Applications

● Industrial Automation Systems

● CAN Bus Communication

● Industrial Equipment Diagnostics

● Building Security Systems

● Equipment Monitoring Systems

● CAN-Based Motor Controllers

● Industrial Data Acquisition

● Embedded System Development & Testing

Product FAQ

What Is the USB to M8 CAN Converter Used For ?

This converter connects USB-equipped computers to compatible CAN bus devices through an M8 A-Code 4-Pin Male connector. It supports CAN communication, equipment monitoring, system configuration and diagnostics in industrial automation applications.

What CAN Communication Speeds Are Supported ?

The converter supports CAN communication rates from 40 Kbps to 1 Mbps. The actual operating speed depends on the connected devices, CAN bus configuration, cable length and network conditions.

What Is the Pin Assignment of the M8 Connector ?

The M8 A-Code 4-Pin Male connector provides CAN-H, CAN-L, GND and PE connections. The exact pin numbering should be confirmed against the product wiring diagram before installation.

Is the USB to CAN Converter Suitable for Industrial Environments ?

Yes. The converter features a compact 67.7 × 17.9 × 9.7 mm module, an IP65-rated design and an M8 industrial connector. It is suitable for compatible automation, monitoring and industrial communication equipment.