XT30 Male to 6 XT30 Female Power Distribution Adapter
PCM-0983 is an XT30 power distribution adapter featuring one XT30 male plug and six XT30 female sockets. Designed for expanding XT30-compatible power connections, it provides a compact solution for RC models, robotics, battery-powered equipment and custom power distribution applications.
1-to-6 XT30 Power Expansion Design
PCM-0983 converts one XT30 male connection into six XT30 female outputs, allowing multiple XT30-compatible devices to connect through a single power distribution point.
Compared with a conventional multi-branch cable harness, the compact molded adapter keeps the XT30 output ports together in one integrated structure and helps simplify wiring in space-limited equipment.
XT30 Male Input with Six Female Outputs
The adapter uses an XT30 male plug on the input side and six XT30 female sockets on the output side. Positive and negative connections are distributed to the corresponding output terminals according to the wiring shown in the technical drawing.
Internal jumper wiring uses 16AWG wire, while the molded body uses black PVC to provide a compact and mechanically protected connection structure.
Key Features
One XT30 male input connection with six XT30 female socket outputs.
Internal connections use UL1569 / UL1007 16AWG jumper wire.
Black PVC overmolding creates a compact integrated power distribution structure.
Suitable for applications requiring several XT30 power connections in a compact layout.
Product Specifications
| Part Number | PCM-0983 |
| Product Type | XT30 Power Distribution Adapter / Splitter Adapter |
| Input Connector | 1 × XT30 Male Plug |
| Output Connector | 6 × XT30 Female Socket |
| Wire Type | UL1569 / UL1007 |
| Wire Gauge | 16AWG |
| Overmold | Black PVC |
| Polarity | Positive to Positive / Negative to Negative |
| Compliance | RoHS |
How the XT30 Distribution Adapter Works
PCM-0983 provides a physical power distribution connection rather than voltage conversion or active power management. The XT30 male input is connected to the corresponding positive and negative terminals of the six XT30 female output sockets.
Important: This adapter does not regulate voltage or independently control each output. The connected power source, wiring and total load should be selected according to the electrical requirements of the complete system.
Typical Applications
RC & Hobby Electronics
Useful for projects requiring several XT30-compatible power connections from a common source.
Robotics Systems
Provides multiple XT30 connection points for compatible motors, controllers, sensors or auxiliary modules.
Battery-Powered Equipment
Suitable for compatible battery systems, test setups and custom low-voltage power distribution projects.
Technical Drawing
PCM-0983 connector configuration, polarity and dimensional reference.
Custom XT30 Power Distribution Solutions
Different equipment may require different numbers of XT30 ports, connector genders, wire gauges or cable arrangements. Premier Cable can support custom XT30 adapters, splitter cables and power distribution assemblies according to project requirements.
XT30 male, XT30 female, multi-port and mixed connector configurations.
Custom wire gauge, wire length, jacket and harness construction can be discussed.
Different output quantities and splitter configurations can be produced according to the application.
Need a Custom XT30 Power Distribution Solution?
Send us the required XT30 connector configuration, number of outputs, wire gauge, cable length and quantity. Premier Cable can support XT30 power distribution adapters, splitter cables and application-specific power cable assemblies.
Contact UsHot Tags: xt30 male to 6 xt30 female power distribution adapter, China xt30 male to 6 xt30 female power distribution adapter manufacturers, suppliers, factory
