In UAV ground-testing equipment, RC model control boxes, and battery-powered devices, power wiring is often located inside the equipment enclosure.
If an XT30 cable is routed directly through an enclosure opening, the cable may experience pulling forces during battery connection and disconnection. This arrangement can also affect panel organization and complicate future maintenance.
PCM-0761 uses a fixed feedthrough structure to relocate the power connection point from inside the equipment to the outside of the panel.
Users can connect or disconnect an external XT30 power cable without opening the enclosure while retaining the existing XT30 connection arrangement inside the equipment.
Product Features
Dual End XT30 Male to Female Configuration
Features an external XT30 male and internal XT30 female connector with direct positive and negative power connections, enabling power feedthrough without signal conversion circuitry.
Circular Threaded Panel Mounting
Features a circular threaded housing and rear retaining nut for mounting on metal or plastic panels, integrating the power interface and mounting function into one assembly.
Polarized Two Contact Power Interface
The polarized XT30 interface features fixed positive and negative contact positions to help prevent incorrect mating. Power-side and equipment-side polarity assignments must be verified before use.
Products Display
Typical Applications
◆ Optimized Enclosure Power Routing
PCM-0761 uses a fixed XT30 panel interface to separate internal and external power wiring. External cables can be connected or disconnected independently, reducing internal harness handling and simplifying equipment maintenance.
◆ Improved Mechanical Load Distribution
PCM-0761 features a circular threaded mounting structure with a retaining nut. The panel absorbs part of the mating force, reducing mechanical stress on internal wiring and terminations while improving connection stability.
◆ Existing XT30 Power System Integration
PCM-0761 features an XT30 male-to-female feedthrough design for existing XT30 power systems. With compatible connector gender, polarity, and electrical ratings, it enables panel-mounted power connections without replacing existing connectors.
◆ Flexible Equipment Panel Integration
PCM-0761 features a circular panel-mount design for flexible installation based on equipment space and wiring direction. Independent internal and external cable configurations accommodate different cable lengths, power connection locations, and enclosure layouts.
Manufacturing Process
Circular Mounting Body Manufacturing
The circular mounting body can be manufactured using suitable precision tooling and molding processes according to the connector's mechanical design requirements.
Manufacturing should control the threaded structure, connector positioning, and retaining-nut mating dimensions. Dimensional consistency of the circular mounting area should be inspected to ensure proper installation on the corresponding equipment panel.
XT30 Contact and Interface Assembly
The XT30 male connector, female connector, and internal conductive connection structure are assembled according to the specified polarity orientation to maintain the correct electrical correspondence between positive and negative contacts.
During contact assembly, contact positioning, interface orientation, and insulation clearance should be inspected to prevent contact misalignment, reversed polarity, or unintended short circuits.
Product Customization Capabilities
Products Drawing
Product FAQ
What Is the Difference Between PCM-0761 and a Standard XT30 Extension Cable ?
PCM-0761 is an XT30 power feedthrough connector designed for fixed equipment panel mounting, whereas a standard XT30 extension cable primarily increases the wiring distance between two power connection points.
PCM-0761 focuses on establishing a fixed external power interface and separating external mating operations from internal equipment wiring.
What Are the Front and Rear Connector Types ?
The standard configuration features an XT30 male connector at the front and an XT30 female connector at the rear.
A customized configuration with an XT30 female connector at the front and an XT30 male connector at the rear can also be evaluated according to equipment interface requirements.
Does the Connector Require Soldering During Installation ?
The standard PCM-0761 configuration uses front and rear XT30 mating interfaces. Normal panel installation is completed using the circular mounting body and rear retaining nut.
The internal equipment cable can mate with the rear XT30 interface without directly soldering the adapter contacts during panel installation.
If a customized cable assembly is selected, solder termination may be required during cable assembly manufacturing.
Can the XT30 Connector Orientation and Matching Cable Assembly Be Customized ?
Front-male/rear-female, front-female/rear-male, and alternative matching cable assembly configurations can be evaluated according to customer project requirements.
Customization options can include cable length, conductor gauge, jacket material, connector orientation, and second-end connector type.
Customers are advised to provide equipment interface drawings, actual operating current, voltage, and installation space requirements to confirm the feasibility of the customized solution.
Are Wholesale Orders and Manufacturer Customization Available ?
Premier Cable can evaluate wholesale procurement, OEM integration, and customized connector solutions for PCM-0761 according to project requirements.
For bulk purchasing projects, customers are advised to provide target quantities, connector configurations, mounting dimensions, and electrical requirements to support product specification confirmation, sample validation, and delivery planning.
Hot Tags: XT30 Round Panel Mount Power Connector, China XT30 Round Panel Mount Power Connector manufacturers, suppliers, factory
