Product Specifications
| Parameter | Specification |
| Cable Configuration | 1 to 4 |
| Cable Retention | 110N Min |
| Connector 1 Part Number | 818018063 |
| Continuity | 100% Test |
| Frequency Range | DC to 5GHz |
| Hi Pot | 500VRMS Min |
| Impedance | 100Ω Nominal |
| Cable Length Options | 0.5m, 1m, 2m |
| Product Number | PCM-XY-0015-X |
| H-MTD Connector Part Number | E6K10A-1CAZ5-Z |
| Operating Temperature | -40°C to 105°C |
| Cable Model | ECT QFP12GD100-B-5G |
| Waterproof Rating | IP67 for ECT Connector |
| Connector 2, 3, 4, 5 | Rosenberger H-MTD Jack Z Code |
| Connector 1 | ECT Jack Z Code IP67 Waterproof |
| Product Type | Automotive Ethernet Cable Assembly |
Key Features & Connector Design

ECT Waterproof Connector with Original Z Code Interface
The PCM-XY-0015-X uses an original ECT Z Code connector, part number 818018063, as its main connection interface. The connector is specified with an IP67 waterproof rating, providing protection against dust and water ingress at the ECT connection point. Its integration into the cable assembly offers a defined interface for automotive Ethernet wiring, while the original manufacturer part number supports accurate component identification and connector matching during project development and production.
Four Way Rosenberger H-MTD Connector Configuration
At the opposite end, the assembly incorporates four Rosenberger H-MTD Z Code connectors, all using original part number E6K10A-1CAZ5-Z. This one to four arrangement brings multiple H-MTD connection points into a single cable assembly, providing a practical interface configuration for automotive Ethernet network distribution. The use of Rosenberger connectors also allows the assembly to follow the specified connector design and pin assignments shown in the product drawing.


Defined Electrical Characteristics for Ethernet Transmission
Designed with a nominal impedance of 100 ohms and a specified frequency range from DC to 5GHz, the PCM-XY-0015-X is configured for automotive Ethernet signal connections. The assembly uses ECT QFP12GD100-B-5G cable, with the wiring layout defined for the four H-MTD branches. A minimum 500VRMS Hi Pot requirement and 100% continuity testing are also specified, providing clear electrical inspection criteria for production quality control.
Mechanical Reliability and Multiple Cable Lengths
The cable assembly specifies a minimum cable retention force of 110N and an operating temperature range from -40°C to 105°C. These requirements define its mechanical and environmental operating conditions for automotive installation. Three standard lengths are available, including 0.5m, 1m and 2m, with individual length tolerances specified in the drawing. This selection allows the cable assembly to accommodate different routing distances while retaining the same ECT to four way Rosenberger H-MTD connector arrangement.

Applications & Product Benefits
Flexible Cable Routing for Different Installations
Available in 0.5m, 1m and 2m lengths, the assembly accommodates different connection distances and installation layouts. These options allow customers to select a suitable cable length for their wiring requirements without changing the established ECT and Rosenberger H-MTD connector configuration.
Automotive Ethernet Network Distribution
Designed for automotive Ethernet systems that require one ECT connection to serve four Rosenberger H-MTD interfaces. The one to four cable configuration provides a centralized connection arrangement for multiple network branches, making it suitable for vehicle communication network layouts that use H-MTD interfaces.
Protected ECT Connection Interface
The ECT connector features an IP67 waterproof design, providing protection against dust and water ingress at the main connection point. This makes the assembly suitable for installation locations where the ECT interface requires additional environmental protection, while the four H-MTD connectors provide the specified network connection points.
Simplified Vehicle Wiring Integration
Combining four Rosenberger H-MTD connectors within one cable assembly helps organize multiple Ethernet connection branches into a single wiring solution. The defined connector part numbers and pin assignments also make it easier for engineering teams to identify interfaces, verify wiring configurations and integrate the assembly into vehicle network systems.
Product Drawing

Product FAQ
Does the IP67 waterproof rating apply to all connectors ?
No. The IP67 rating is specifically indicated for the ECT connector 818018063. The drawing does not specify an IP67 waterproof rating for the four Rosenberger H-MTD connectors.
What are the electrical specifications of this H-MTD Ethernet cable ?
The assembly has a nominal impedance of 100 ohms and a specified frequency range of DC to 5GHz. The drawing also requires a minimum 500VRMS Hi Pot test and 100% continuity testing.
Which original connectors are used in this cable assembly ?
The main connector is ECT 818018063, featuring an IP67 waterproof design. The four branch connectors are Rosenberger H-MTD Z Code interfaces, all using original part number E6K10A-1CAZ5-Z.
What cable lengths are available for PCM-XY-0015-X ?
The assembly is available in 0.5m, 1m and 2m lengths. Each version has its own specified length tolerance, allowing customers to select the appropriate configuration for their installation requirements.
What is the connector configuration of the PCM-XY-0015-X cable assembly ?
The assembly connects one ECT Z Code connector to four Rosenberger H-MTD Z Code connectors, forming a one to four automotive Ethernet cable configuration for multiple network connection points.
Hot Tags: ect 818018063 to h-mtd ethernet cable, China ect 818018063 to h-mtd ethernet cable manufacturers, suppliers, factory

