Product Specifications
| Parameter | Specification |
| Waterproof Rating | IP67 |
| Cable Configuration | 1 to 4 |
| Cable Retention | 110N Min |
| Connector 1 Part Number | 818018063 |
| TE MATEnet Jack Part Number | 2302510-9 |
| TE MATEnet Plug Part Number | 2302461-9 |
| Continuity | 100% Test |
| Frequency Range | DC to 5GHz |
| Hi Pot | 500VRMS Min |
| Impedance | 100Ω Nominal |
| Cable Length Options | 0.5m, 1m, 2m |
| Product Number | PCM-XY-0014-X |
| Operating Temperature | -40°C to 105°C |
| Cable Model | ECT QFP12GD100-B-5G |
| Connector 2, 3, 4, 5 | TE MATEnet Jack Z Code |
| Connector 1 | ECT Jack Z Code IP67 Waterproof |
| Product Type | Automotive Ethernet Cable Assembly |
Key Features & Connector Design

ECT IP67 Waterproof Z Code Connector
The PCM-XY-0014-X cable assembly features an original ECT Z Code connector, part number 818018063, with an IP67 waterproof design. This connector provides a protected interface for automotive Ethernet connections where resistance to dust and water ingress is required. The ECT connector is integrated with four TE MATEnet Z Code interfaces, creating a compact multiport connection solution for automotive network installations. Its original connector configuration supports consistent component matching and integration into vehicle wiring systems.
Four Way TE MATEnet Connection Design
Designed with a 1 to 4 connection configuration, this cable assembly connects one ECT Z Code interface to four TE MATEnet Z Code interfaces. The assembly uses TE MATEnet plug part number 2302461-9 and jack part number 2302510-9, providing clearly defined connector interfaces for multiport automotive Ethernet applications. This arrangement allows multiple network connections to be routed through one cable assembly, helping simplify wiring layouts and reduce the need for separate cable runs.


100 Ohm Impedance and High Frequency Performance
Built with a nominal impedance of 100 ohms, the PCM-XY-0014-X supports automotive Ethernet signal transmission across a specified frequency range of DC to 5GHz. The cable uses ECT QFP12GD100-B-5G cable material and follows a defined pin assignment for the four MATEnet connection branches. These electrical specifications make the assembly suitable for automotive high speed data connectivity, where controlled impedance and reliable signal transmission are important to the overall network connection.
Verified Mechanical Performance and Flexible Length Options
The cable assembly is specified with a minimum 500VRMS Hi Pot test, 100% continuity testing and a minimum cable retention force of 110N. It is designed for an operating temperature range of -40°C to 105°C, supporting installation in demanding automotive environments. Three standard cable lengths are available: 0.5m, 1m and 2m. These options provide flexibility for different vehicle wiring layouts while maintaining the same ECT to four way MATEnet connector configuration.

Applications & Product Benefits
Automotive Ethernet Network Distribution
Designed for automotive Ethernet network architectures that require one ECT connection to branch into four TE MATEnet interfaces. The 1 to 4 configuration provides a practical connection solution for multiport in vehicle network layouts.
Flexible Installation and Cable Routing
Available in 0.5m, 1m and 2m lengths, PCM-XY-0014-X accommodates different installation distances and vehicle wiring layouts. Its defined connector configuration and pin assignments provide a consistent wiring arrangement for automotive Ethernet integration.
Waterproof Connectivity for Automotive Environments
The ECT connector features an IP67 waterproof design, making the assembly suitable for automotive installation locations where protection against dust and water ingress is required. Its operating temperature range of -40°C to 105°C supports use across a wide range of vehicle operating conditions.
Simplified Wiring and Integration
Combining four MATEnet connection branches into one cable assembly helps organize network wiring and reduces the need for multiple independent cable assemblies. The original ECT and TE connector part numbers also make component identification and connector matching more straightforward during system integration.
Product Drawing

Product FAQ
What are the electrical specifications of this automotive Ethernet cable ?
The cable has a nominal impedance of 100 ohms and a frequency range of DC to 5GHz. The drawing also specifies a minimum 500VRMS Hi Pot test and 100% continuity testing.
Which original connector part numbers are used in this cable assembly ?
The assembly uses ECT connector 818018063, TE MATEnet plug 2302461-9 and TE MATEnet jack 2302510-9, following the connector configuration specified in the product drawing.
What is the connector configuration of the PCM-XY-0014-X cable assembly ?
The assembly features one ECT Z Code IP67 waterproof connector, part number 818018063, connected to four TE MATEnet Z Code interfaces, providing a 1 to 4 automotive Ethernet connection layout.
What cable lengths are available for the PCM-XY-0014-X ?
Three standard cable lengths are available: 0.5m, 1m and 2m. These options accommodate different installation distances and wiring layouts while maintaining the same 1 to 4 connector configuration.
Is the PCM-XY-0014-X suitable for automotive environments with temperature variations ?
Yes. The assembly is specified for an operating temperature range of -40°C to 105°C. Its ECT connector also features an IP67 waterproof design for applications requiring protection against dust and water ingress.
Hot Tags: ect 818018063 ip67 waterproof automotive ethernet cable, China ect 818018063 ip67 waterproof automotive ethernet cable manufacturers, suppliers, factory

