Four Cavity ECT Connection to Individual HFM Ports

This Premier Cable assembly connects an ECT Mini Fakra 818018733 A Code four cavity female interface to four Rosenberger AMK16A-1M4Z5-Z single cavity HFM female connectors. It accommodates automotive camera wiring where one end groups four coaxial connections and the other requires individual HFM terminations.

The distinguishing feature is the connector combination: a black ECT main housing with IP67 Waterproof protection and four separate, non waterproof Rosenberger HFM ends. Each coaxial path terminates independently, allowing the branch connections to match equipment with distributed HFM ports.

Product Specifications

Single Cavity HFM Terminations

HFM Interface at Every Branch
Each branch uses the Rosenberger AMK16A-1M4Z5-Z female connector. This version addresses installations requiring individual HFM mating interfaces, so the branch connector family and gender must match the receiving equipment.

Separate Connections Beyond the Main Housing
The four cavity ECT end keeps the equipment connection grouped, while the single cavity HFM ends remain independently accessible. Branches can reach ports at different positions without requiring a grouped HFM connector at the opposite end.

Defined Cavity to Branch Assignment
Each HFM end corresponds to a contact position in the ECT housing. A confirmed channel map and optional branch identification labels establish which connection belongs to each camera path during assembly and service.

Harness Layout and Length Selection

Dimensions Based on HFM Port Positions
Specify the distance from the ECT connector to each HFM endpoint, including the breakout position and clearance around the connector housings. Unequal branch lengths can be reviewed when the receiving ports are spaced apart.

Cable Selection for the Required Link
Listed cable references include DACAR 302-4 and ECT302LL within the supplied RTK031 cable family description. Confirm the final cable model and length against the camera link requirements before production.

Protection at the Installation Boundaries
Place the non waterproof HFM connections within protected areas. At the ECT end, confirm the mating connector and sealing conditions required for IP67 Waterproof protection.

Notes: Confirm pin assignment, cavity mapping, HFM mating connector details and individual branch lengths before ordering.

Product FAQ

What makes this version different from the Fakra branch versions?
This version terminates in four Rosenberger AMK16A-1M4Z5-Z single cavity HFM female connectors. The Fakra branch versions use different connector interfaces. Select according to the actual mating port rather than housing color alone.

Can the HFM ends connect to standard Fakra ports?
HFM and standard Fakra are different connector interfaces. Confirm the receiving connector part number and mating dimensions; do not assume direct interchangeability.

Is this a signal splitter?
This is a four channel coaxial breakout cable. It routes the four contacts of the ECT housing to individual HFM ends according to the approved wiring drawing, rather than duplicating one signal.

Are the four HFM connectors also IP67 Waterproof?
No. The supplied specification identifies the HFM branch connectors as non waterproof. IP67 Waterproof applies to the ECT main connector under the required mating and sealing conditions.

What should be supplied for a custom layout?
Send the required quantity, cable model, cavity assignment and a dimensioned routing sketch. Include each HFM port position, branch length, breakout location and any identification label requirements.