Rosenberger H-MTD Z Coded Ethernet Cable

Rosenberger H-MTD Z Coded Ethernet Cable

Rosenberger H-MTD Z Coded Ethernet Cable

Rosenberger H-MTD Z Coded Ethernet Cable suppliers

Rosenberger H-MTD Z Coded Ethernet Cable suppliers

Rosenberger H-MTD Z Coded Ethernet Cable factory

Rosenberger H-MTD Z Coded Ethernet Cable factory

Rosenberger H-MTD Z Coded Ethernet Cable
Details:
Rosenberger H-MTD x2 6P Hybrid Z Coded Female 10G Automotive Ethernet Harness 99K1HG-1CAZ5-Z Dual Channel 10GbE Power Block, GG 2SPEED R 251 Cable,0.5–5 m
Send Inquiry

Online Store: www.premier-cable.store

Small Orders: Buy online at retail price

Bulk Orders: Contact sales for volume pricing

Description
Send Inquiry
 

In zonal and domain-based vehicle architectures, a single ECU block has to handle two jobs at once: multi-gigabit sensor data cameras, radar, LiDAR over H-MTD and DC power low-speed control signals power to sensors, wake lines, GPIOs . Running Ethernet and power through separate connectors means two mated pairs, two panel cut-outs, and two sets of locking latches - wasting ECU real estate and adding weight.

 

Rosenberger's H-MTD x2 6P hybrid connector solves this by combining: 2 × H-MTD coax channels - each carrying up to 10 Gbps differential Ethernet 10GBASE-T1 multi-gigabit ; 1 × 6-position black power signal block - accepting TE MQS-style power contacts e.g. 928999-1 for DC power, ground and control lines.The result is one mated pair that brings both 10G data and power into a zonal ECU - exactly why this hybrid form factor is appearing on new-generation domain controllers and ADAS computers. Because each H-MTD channel is a 10G-grade shielded differential pair, factory termination on the original GG 2SPEED R 251 cable is required to hold the 100 Ω impedance and 360° shielding that a 10 GbE link depends on.

 

Whether you are building a zonal domain controller harness, bringing up an ADAS computer on the bench, or replacing a worn hybrid pigtail on a head unit T-Box, this H-MTD x2 6P harness carries two 10G Ethernet channels and your power lines through one connector - pick Config 1 if you need bare H-MTD cores at the device end, or Config 2 for a fully-housed double-ended extension.

Product Specifications

Item Specification
Compliance RoHS
Cable Shape Round
Conductor Tinned copper
Flame Rating Flame retardant
Cable Type Twisted pair, fully shielded
Use Environment Indoor in-vehicle electronic equipment
Housing Color Water blue H-MTD Z-coded black 6P core block
H-MTD Channels 2 × H-MTD coax each up to 10 Gbps 10GBASE-T1
Length Options 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 4 m, 5 m custom on request
Cable Original GG 2SPEED R 251, 10G shielded automotive Ethernet
Data Rate Up to 10 Gbps per H-MTD channel multi-gigabit automotive Ethernet
Brand Connector Rosenberger HDCS - H-MTD hybrid 2 × H-MTD coax 6P power block
Hybrid Connector PN 99K1HG-1CAZ5-Z, Z-coded, water blue, female, dual-channel, non-waterproof
Power Block 6-position black core, compatible with TE MQS terminals e.g. 928999-1 - ships empty by default; crimping & wiring available on request

Available Configurations

0e43ea51-91b7-4de4-a8b7-e918b50d48d5
Version 1

H-MTD Hybrid Female H-MTD Female Cores ×2

 

This dual-channel Rosenberger H-MTD hybrid harness uses GG 2SPEED R 251 fully-shielded 10G Ethernet cable. It has a water-blue Z-coded hybrid female connector (99K1HG-1CAZ5-Z) accommodating two coax channels and an empty 6P power block; we can pre-crimp TE MQS power contacts per your pinout requirement.

 

The other end provides two bare H-MTD contact cores without plastic shells for custom panel or board mounting. Factory-terminated and individually shielding-tested, it combines dual 10G data lines and power at the ECU interface. Bare replaceable contacts fit board breakout applications and designs with customer-supplied enclosures.

Version 2

H-MTD x2 Hybrid Female on Both Ends 

 

This certified Rosenberger H-MTD dual hybrid harness links two hybrid-panel ECUs using GG 2SPEED R 251 fully-shielded 10G cable. Both ends adopt water-blue Z-coded H-MTD x2 6P hybrid female connectors (99K1HG-1CAZ5-Z), each containing two independent 10G channels and a 6P power block.

 

Fully housed without bare cores, it needs no field crimping. Its 360° continuous shielding meets EMC requirements for zonal ECU modules, and the blue Z-key shell supports visual inspection during servicing. It combines dual 10G data and power in one connection, replacing four discrete coax and power cables.

ded8816b-d95d-4ac1-a809-6b584ed606f7

Applications 

Application How It Is Used What It Enables 
ADAS domain computer bench bring-up Plug the hybrid housing into the ECU on the bench; bare H-MTD cores Config 1 mate directly to test fixtures panel sockets. No custom breakout board needed for bench validation.
Head unit T-Box hybrid pigtail replacement Replace a worn or damaged H-MTD x2 6P factory pigtail on a head unit, telematics box or gateway Config 2 . OEM-form-factor replacement that keeps 10G signal integrity intact.
6P power feed to a remote sensor Use the 6-position block to carry sensor 12V power, ground and wake lines alongside the two H-MTD data channels. Power and high-speed data in one routed cable - no separate power pigtail.
Zonal domain controller harness One hybrid connector on the ECU brings 2 × 10G Ethernet DC power to a remote sensor camera node Config 2 . One mated pair instead of four - smaller I O, lighter harness, fewer failure points.
Custom housing retrofit projects Config 1 bare cores let integrators seat the H-MTD contacts into their own custom panel enclosure. Full flexibility for non-standard mechanical integration without sacrificing contact quality.

 

Closing line: Because the two H-MTD coax channels and the 6P power block are factory-terminated as one assembly, your zonal ECU gets dual 10G data and DC power through a single connector - and the water-blue Z-key housing makes every mating visually self-checking.

Professional Services

Engineering docs: Datasheet, mating-part list, pinout and cable drawing available on request.

Length customization: 0.5 m–5 m in stock; non-standard cut lengths built to your drawing on request.

Quality before dispatch: 100% per-H-MTD-channel continuity shielding continuity tested on every assembly; test reports on request.

OEM & bulk support: zonal-ECU developers, ADAS integrators and aftermarket chains get volume pricing and private-label packaging.

Customization: Config 1 hybrid-to-bare cores or Config 2 hybrid on both ends ; male female and other color-band variants quoted on request.

Product FAQ

Q1: Does the 6P power block come with terminals and wires?

By default, the 6P block ships as an empty black core - no terminals crimped, no wires inserted, so you can load your own MQS contacts. If you send us your power pinout, we can pre-crimp TE MQS terminals e.g. 928999-1 and dress the wires to your requirement at extra cost  please mention this in the order notes.

Q2: Which length should I order?

0.5 m for bench-to-device jumpers; 1 m–1.5 m for in-cabin ECU-to-sensor runs; 2 m–5 m for zonal ECU to door trunk under-hood routing. When in doubt, take the next length up - excess can be coiled neatly, but a harness that is too short cannot be extended in the field. Custom lengths and 6P pinouts are quoted on request.

Q3: Is this a genuine Rosenberger H-MTD connector?

Yes. The hybrid housing is genuine Rosenberger HDCS 99K1HG-1CAZ5-Z - H-MTD x2 dual coax channels 6P power block, Z-coded, water blue, female, non-waterproof. The cable is original GG 2SPEED R 251 10G shielded automotive Ethernet wire.

Q4 :What is the difference between Config 1 and Config 2?

Config 1: one end is the full water-blue H-MTD x2 6P hybrid housing; the other end is two bare H-MTD female cores.
Config 2: the water-blue hybrid housing 99K1HG-1CAZ5-Z is on both ends - a fully double-ended extension between two panels ECUs.

 

 

 

 

Hot Tags: rosenberger h-mtd z coded ethernet cable, China rosenberger h-mtd z coded ethernet cable manufacturers, suppliers, factory

Send Inquiry