LD5-203 Cable
The LD5-203 belongs to the Rosenberger HSD automotive high-speed data connectivity family and is a pre-assembled automotive cable solution.
Rather than being a conventional cable with two generic connectors, it integrates dedicated HSD connectors, a four-core data cable, and a shielding connection structure into one complete assembly with defined interface configurations and wiring assignments.
- End A: Straight HSD Jack.
- End B: 90-degree Right Angle HSD Jack.
- End B Cable Exit: Cable Left.
- Cable Type: DACAR 535.
- Cable Configuration: 4-Pole.
- Interface Reference: RN 059-01.
Product Specifications
| ltem | Specification |
| Product Model | LD5-203-XXXX-Y-Y |
| Technology | Radio Frequency |
| Category | Cable Assemblies |
| Business Area | Automotive |
| Series | Rosenberger HSD |
| End A | Straight HSD Jack |
| End B | 90° Right Angle HSD Jack |
| End B Orientation | Cable Left |
| Cable | RACAR 535 |
| End A Coding | A,B,C,D,E,F,Z |
| End B Coding |
A,B,C,D,E,F,Z |
Key Performance Advantages
- Dual Differential Signal Transmission Capability
The four-core HSD cable construction supports two differential signal pairs, making it suitable for automotive electronic systems requiring multiple high-speed signal paths.
This wiring arrangement accommodates different signal channel requirements and provides connectivity for automotive cameras, infotainment equipment, and other compatible electronic modules.
- Electromagnetic Compatibility (EMC) Design
The HSD family incorporates shielding and impedance-control designs to help reduce the impact of external electromagnetic interference on signal transmission while minimizing the risk of crosstalk between different signal paths.
These design features help improve signal connectivity stability in the complex electromagnetic environments of automotive electronic systems.
- Clear Wiring Identification and Management
The assembly uses a combination of conductor colors and position numbering to distinguish individual wires and their corresponding circuit positions.
This identification method simplifies wiring inspection during production, installation verification, and subsequent maintenance, helping reduce wiring identification errors and improve harness management efficiency.
Why Does the HSD System Use a 100-Ohm Impedance Design ?
100 ohms is an important electrical design parameter of automotive HSD differential data interconnect systems.
During high-speed data transmission, significant impedance discontinuities between the cable, connector, and equipment interface can cause signal reflections.
Reflected signals may affect waveform quality at the receiver and potentially increase data error risks.
The HSD system therefore uses impedance-controlled connector and cable designs to help maintain electrical consistency throughout the connection path.
Product FAQ
What Is the Difference Between LD5-203 and LD5-204 ?
The primary difference is the cable exit direction of the 90-degree right-angle connector at End B.
LD5-203 uses a Cable Left configuration, while LD5-204 uses a Cable Right configuration.
Both belong to the Rosenberger HSD four-core automotive cable assembly family. Selection should be based on equipment interface orientation and actual cable routing requirements.
Does the LD5-203 Support Two Differential Signal Pairs ?
The LD5-203 uses a four-core HSD cable construction that provides the conductor arrangement for two differential signal pairs. Actual signal assignments and supported communication protocols should be confirmed according to equipment design and project electrical specifications.
Can the LD5-203 Replace a Conventional Coaxial Cable ?
The two cable types have different electrical constructions and connection methods and cannot be directly interchanged. The LD5-203 is a four-core HSD differential data assembly, whereas a conventional coaxial cable typically uses a central conductor surrounded by a coaxial shield. Selection should follow the equipment interface and transmission protocol requirements.
Can the LD5-203 Be Used in High-Density Automotive Electronics ?
It can be evaluated for high-density automotive electronic installations according to interface and mounting requirements. The combination of straight and right-angle connectors accommodates different interface orientations, but connector access, cable bending clearance, and spacing from adjacent components must still be checked.
Get In Touch
Hot Tags: rosenberger ld5-203-xxxx-y-y cable, China rosenberger ld5-203-xxxx-y-y cable manufacturers, suppliers, factory




