Product Specifications
| Parameter | Confirmed Information |
|---|---|
| Default Cable Type | RG174 |
| Housing Color | Water blue |
| Gender | Female to female |
| Interface | FAKRA to FAKRA |
| Connector Orientation | Straight at both ends |
| Signal Type | Camera coaxial connection |
| Connector Type | Single cavity FAKRA female |
| Sealing Arrangement | Sealed connectors at both ends |
| Product Type | Automotive surround view camera cable |
| Custom Options | Cable length and specified cable material |
| Alternative Cable Types | 1.5DS and DACAR 302-4, subject to confirmation |
Configuration
Sealed FAKRA Straight Female to Female Camera Cable
Connection Structure
One single cavity FAKRA straight female connector at each end, joined by coaxial cable.
Unique Difference
This configuration combines female mating interfaces with sealed connector structures at both endpoints.
Suitable Installation
For camera wiring projects with corresponding male mating interfaces at both destinations. Connector coding, dimensions and sealing arrangements must match the selected counterparts.
Applications & Customer Value
Surround View Camera Harness Replacement
A replacement lead must follow the original connection arrangement and installation route. This assembly offers a female-to-female configuration for evaluation against the removed harness and vehicle documentation.
Connections Outside Protected Cabin Areas
Camera wiring can reach locations where moisture exposure needs consideration. Sealed endpoints allow the connection design to address those local conditions together with the specified mating parts.
Camera Position Changes
Relocating a camera during an installation project changes the required cable route. A defined replacement length can accommodate the revised position without unnecessary cable accumulation.
Workshop and Project Procurement
Vehicle names alone can leave uncertainty about the required harness. Reviewing connector photographs, original references and measured dimensions gives purchasing teams a more precise basis for ordering.
Product Features
Single Cavity Mating Structure
Each connector housing contains one coaxial mating position. The assembly forms an individual, standalone connection rather than a branched camera harness.
Straight Cable Entry Design
The cables leave the connectors along their mating axes. Installation planning should allow sufficient space behind the connector bodies for routing and cable support.
Enclosed Rear Connector Construction
The images show rear housing components around cable entries. These form part of the sealed connector arrangement; no material specification or protection rating is provided.
Specified Default Coaxial Cable
RG174 is the listed standard cable. Alternative constructions should be identified in the approved BOM so that the supplied assembly matches the project specification.
Customization Capabilities
Premier Cable supports:
Connector Customization
Connector type, gender, coding and housing design can be reviewed against the original vehicle interfaces. Mating photographs and connector drawings can support the selection of an appropriate assembly configuration.
Cable Customization
Cable length, jacket, shielding and cable structure can be evaluated for the installation route. RG174 is the default, while 1.5DS, DACAR 302-4 or other specified materials require project confirmation.
Electrical Customization
Pin assignment, wiring definition and circuit configuration can be reviewed from the equipment requirements. Resistance values and power ratings can be evaluated where additional electrical components are required, subject to engineering feasibility.
OEM Manufacturing
Premier Cable supports drawing review, prototype assembly and mass production against approved specifications. Labels and packaging can identify installation positions, project references and cable versions.
Product FAQ
Q1: Does this cable connect all cameras in a 360 system?
It provides one coaxial connection path. The complete system may require several separate camera leads.
Q2: Can the connector Code be identified from the water blue housing?
The supplied material does not explicitly state the Code. Confirm the coding and mating geometry before selection.
Q3: Is it compatible with every Audi model listed in the original product name?
Universal compatibility is not established. Model year, camera equipment, connector references and the original harness must be checked for the specific vehicle.
Q4: Can the cable be specified as IP67 Waterproof?
That rating requires supporting confirmation for the intended assembled and mated connection. It is not provided in the current material.
Q5: What is needed for a replacement cable inquiry?
Provide the vehicle model and year, camera configuration, original harness reference if available, clear photographs of both mating interfaces, required length and quantity.
Hot Tags: fakra female cable for 360 camera systems, China fakra female cable for 360 camera systems manufacturers, suppliers, factory
