SMB5.0 To 59Z176-C01-Z FAKRA Cable

The PCM-XY-0042-X is a compact automotive RF coaxial cable assembly featuring an SMB5.0 female metal flange connector at one end and an IP67 waterproof Rosenberger FAKRA Z Code plug at the other. It provides a direct 50Ω coaxial connection between a panel mounted RF interface and a compatible vehicle antenna or electronic module.

The assembly uses FORCE QP12GT50-B-G 0.13 105℃ cable and the original Rosenberger 59Z176-C01-Z connector. Its metal flange design supports fixed panel installation, while the waterproof FAKRA connector provides a secure mating interface for automotive RF connections. The P1 connector end also undergoes a specified airtightness test to verify sealing performance.

Product Specifications

Connector Design & Cable Construction

SMB5.0 Flange Mounting Interface

The P1 end features an SMB5.0 female connector integrated into a metal flange plate. Its two mounting holes allow the connector to be secured directly to a panel or equipment housing, providing a fixed RF connection point without requiring the cable itself to support the mounting load. The flange measures approximately 19.6mm in overall length and 13.6mm in width, with two Ø2.4mm mounting holes as shown in the engineering drawing. This arrangement is suitable for equipment housings that require a compact, fixed coaxial feedthrough connection.

Rosenberger IP67 Waterproof FAKRA Z Connector

The P2 end uses the original Rosenberger 59Z176-C01-Z FAKRA Plug Z Code connector. Its IP67 waterproof connector design provides protection against dust ingress and temporary water immersion when properly mated with a compatible interface under the specified sealing conditions. The keyed housing supports correct connector orientation, while the automotive FAKRA interface provides a secure connection for vehicle RF systems. The original Rosenberger part number should be used when selecting the mating connector to ensure mechanical compatibility.

Coaxial Transmission And Electrical Performance

The cable assembly uses FORCE QP12GT50-B-G 0.13 105℃ coaxial cable with a nominal impedance of 50Ω. The specified frequency range extends from DC to 3GHz, making the assembly suitable for RF signal connections within this range. The engineering drawing specifies a maximum VSWR of 1.800 and a minimum Hi-Pot requirement of 800Vrms. The coaxial construction maintains a continuous signal path between the SMB5.0 female interface and the Rosenberger FAKRA connector, supporting consistent RF connectivity in the installed system.

Flange Sealing And Cable Termination

The P1 flange end is subject to a dedicated airtightness test covering the connector end face and internal cavity. According to the engineering drawing, the test uses a pressure of 100KPa, with a 5 second inflation period, 5 second stabilization period, 5 second test period and 1-second exhaust period. The specified leakage value is 30Pa. This additional inspection requirement addresses sealing at the panel-mounted connector end. The cable assembly also specifies a minimum cable retention force of 110N, helping verify the mechanical integrity of the cable termination.

Applications & Product Benefits

Automotive Antenna Connections

Connect vehicle RF antenna interfaces to equipment housings through a fixed SMB5.0 flange connection and a waterproof FAKRA interface. The configuration supports compact antenna signal routing in automotive electronic systems.

Vehicle Communication Modules

Suitable for compatible RF communication modules, antenna assemblies and vehicle electronic equipment requiring 50Ω coaxial connections within the specified frequency range.

Sealed Equipment Enclosures

The metal flange provides a defined mounting interface for equipment panels, while the P1 airtightness test addresses sealing requirements at the connector end. This is useful for equipment designs where the RF connection passes through an enclosure wall.

Custom RF Cable Integration

Premier Cable supports customized coaxial cable lengths, connector combinations and flange configurations according to customer drawings or reference samples, helping equipment manufacturers match the assembly to their installation requirements.

Product Drawing

Product FAQ

Is the FAKRA connector waterproof ?

Yes. The Rosenberger 59Z176-C01-Z connector is specified as IP67 waterproof. The protection rating applies to the connector under the specified mating and sealing conditions.

Which connectors are used at each end ?

The P1 end uses an SMB5.0 female metal flange connector. The P2 end uses an original Rosenberger 59Z176-C01-Z FAKRA Plug Z Code IP67 waterproof connector.

Can the cable length or connector configuration be customized ?

Yes. Premier Cable can discuss customized cable lengths, connector combinations and flange configurations based on customer drawings or application requirements.

What are the electrical specifications ?

The assembly has a nominal impedance of 50Ω and a frequency range from DC to 3GHz. The drawing also specifies a maximum VSWR of 1.800 and a minimum Hi-Pot requirement of 800Vrms.

What is the airtightness test requirement ?

The P1 connector end face and cavity undergo a pressure test at 100KPa. The specified test sequence includes inflation, stabilization, testing and exhaust, with a specified leakage value of 30Pa.