Rosenberger to SMA Automotive RF Coaxial Cable
This single-channel coaxial cable provides a direct transition between a Rosenberger automotive RF interface and a standard SMA connector, making it suitable for vehicle RF modules, antennas, development equipment, and laboratory test connections.
Four connector combinations are available: female-to-female, female-to-male, male-to-female, and male-to-male. This allows the cable assembly to match different device and test-equipment interfaces without adding a separate gender adapter.
The SMA interface uses a 50 Ohm coaxial architecture with threaded coupling, making it widely applicable to RF, test and measurement, communication, and instrumentation systems.
Product Specifications
| Specification | Details |
|---|---|
| SMA Impedance | 50 Ohm |
| Signal Type | RF / Coaxial |
| Cable Length | Customizable |
| Connector Version | Project Specific |
| SMA Interface | Threaded RF Connector |
| Interface | Rosenberger Single-Port to SMA |
| Product Type | Automotive RF Coaxial Adapter Cable |
| Configurations | Female-Female / Female-Male / Male-Female / Male-Male |
Available Configurations
Rosenberger Female to SMA Female Cable
Female RF Test Interface
Combines a Rosenberger female automotive interface with an SMA female connector, providing a direct coaxial transition for compatible RF modules, antennas, and test equipment.
Suitable where both mating devices require female cable-side interfaces.
Rosenberger Female to SMA Male Cable
Direct SMA Male Connection
Transitions a Rosenberger female automotive connector to an SMA male interface for direct connection with compatible SMA female ports on RF instruments, modules, or antenna equipment.
The integrated configuration reduces the need for an additional SMA gender adapter.
Rosenberger Male to SMA Female Cable
SMA Female Test Connection
Combines a Rosenberger male automotive interface with an SMA female connector, providing a practical connection between vehicle RF hardware and compatible SMA test or measurement equipment.
Suitable for development benches, module validation, and RF interface adaptation.
Rosenberger Male to SMA Male Cable
Dual Male RF Interface
Provides Rosenberger male and SMA male interfaces in one coaxial assembly for systems requiring corresponding female mating ports.
This configuration completes the four available mating combinations for different vehicle and laboratory interfaces.
Typical Applications
Product Features
Rosenberger to SMA Interface Conversion
Combines an automotive-side Rosenberger coaxial connector and a standard SMA RF interface in one cable assembly for direct cross-interface connection.
Four Gender Combinations
Female-female, female-male, male-female, and male-male options accommodate different mating interfaces on vehicle modules, antennas, test fixtures, and RF instruments.
50 Ohm SMA Interface
The SMA side uses a standard 50 Ohm RF interface suitable for integration with compatible RF equipment. Rosenberger specifies its SMA connectors according to IEC 60169-15, EN 122110 and MIL-STD-348A.
Threaded SMA Connection
The SMA side uses screw-on locking rather than an automotive plastic latch, providing a secure interface for compatible laboratory and RF equipment.
CORE BENEFITS
Bridge Automotive and Laboratory Interfaces
Converts a vehicle-oriented Rosenberger coaxial interface to SMA, making it easier to connect automotive RF hardware with standard test and measurement equipment.
Reduce Separate RF Adapters
The required interface transition and cable connection are integrated into one assembly, reducing the need to stack multiple adapters.
Simplify Prototype Testing
SMA termination provides a practical interface for development benches, RF instruments, antenna testing, and module validation.
Match Different Mating Requirements
Four gender combinations allow engineers to select the required interface without changing the mating connector on existing equipment.
Connection & Ordering Notes
Before ordering, please confirm:
- Rosenberger connector series
- Rosenberger connector part number
- Rosenberger-side gender
- SMA-side gender
- Cable type
- Required cable length
- Operating frequency requirement
- Target RF module or test equipment
- Labeling requirements
Important: Do not select the cable only by connector housing color or appearance. The exact Rosenberger connector series and mating interface should be confirmed before production.
Product FAQ
Q1. What connector configurations are available?
A1. Four versions are available: Rosenberger female to SMA female, Rosenberger female to SMA male, Rosenberger male to SMA female, and Rosenberger male to SMA male.
Q2. Is the SMA interface 50 Ohm?
A2. Yes. Rosenberger specifies its standard SMA connector system with a 50 Ohm impedance.
Q3. Does this cable support 18 GHz?
A3. The Rosenberger SMA connector family supports frequencies up to 18 GHz, but the complete cable assembly rating depends on the Rosenberger-side connector, cable type, assembly construction, and required electrical performance.
Q4. Can this cable connect automotive modules to RF test equipment?
A4. Yes, when the connector and electrical requirements match. The SMA interface is commonly used with RF test, measurement, communication, and instrumentation equipment.
Q5. Can the cable be customized?
A5. Yes. Connector gender, cable type, cable length, labeling, and other assembly requirements can be customized for the target module or test setup.
Hot Tags: rosenberger fakra to sma cable, China rosenberger fakra to sma cable manufacturers, suppliers, factory
