The solder cup termination approach allows individual conductors to be connected to designated contacts according to project-specific pin assignments. This is suitable for manufacturing projects requiring fixed wiring maps and dedicated harness configurations. Bayonet coupling provides a detachable electrical interface between equipment components, supporting module replacement, equipment inspection, and cable disconnection.
The Class J construction direction also involves cable clamping for multi-jacketed cables, moisture-proofing applications, and strain relief. By selecting a compatible cable outside diameter and clamp assembly, a suitable mechanical retention and sealing arrangement can be established at the cable entry.
Product Drawings
|
|
|
Product Features
- 14-Position Male Pin Interface
The product is designed around a fourteen-position male pin configuration, allowing different electrical circuits to be assigned according to equipment schematics. It is suitable for equipment interfaces requiring multiple control, feedback, and auxiliary connections.
- Class J Multi-Jacket Cable Clamp Construction
The Class J construction uses a clamp assembly intended for multi-jacketed cables, incorporating cable-entry moisture protection and strain relief features.
- Bayonet Straight Plug Construction
Combines a straight plug design with bayonet mechanical coupling. Guiding features and rotational engagement establish the connection, making it suitable for equipment requiring detachable cable interfaces.
Product Design Advantages
◆ Centralized Interface Architecture
The multi-position circular interface consolidates several electrical connection channels into one connector. Compared with multiple independent interfaces, this approach helps standardize connection points and simplify equipment interface planning.
◆ Polarized Interface Design
The circular connector's polarization features help identify the correct mating orientation and reduce connection errors during assembly. This is particularly useful in equipment requiring repeated connection and disconnection.
◆ Cable Harness Integration
Its cable-side configuration allows the connector to be incorporated into custom cable assemblies. Engineers can develop complete interconnection solutions based on harness length, wire grouping, and equipment installation requirements.
Product FAQ
Why Are Circular Connectors Widely Used in Industrial Equipment ?
Circular connectors have a long history of use in industrial equipment. Their primary characteristic is a round interface designed to mate with a compatible circular connector.
This interface format can accommodate various equipment installation arrangements and is used for power connections, control signal transmission, and instrument interfaces.
Compared with certain rectangular interfaces, circular connectors offer different characteristics in mechanical coupling, interface positioning, and equipment connection layouts.
Is the MS3116J12-14P Suitable for Custom Cable Assemblies ?
It can be used as a connector component in custom cable assemblies. Premier Cable can evaluate cable length, wire gauge, circuit assignments, and the opposite-end interface to develop a suitable harness solution.
How Can Incorrect Wiring Be Prevented in a 14-Position Connector ?
A clear circuit assignment table should be established during the design stage, with each position numbered and identified. During production, wire mapping and continuity checks should be performed against the approved wiring diagram.
Is the MS3116J12-14P Suitable for Space-Constrained Equipment ?
Suitability should be evaluated based on available installation space, connector dimensions, cable bend radius, and rear maintenance clearance. Contact quantity alone does not determine installation compatibility.
Get In Touch
Hot Tags: ms3116j12-14p connector, China ms3116j12-14p connector manufacturers, suppliers, factory






