Molex 111146-3030 HSAutoLink II 12 Pin LVDS Cable Assembly 2M
A 4-pair LVDS plug-to-plug cable assembly for automotive displays, camera systems, ADAS platforms, ECUs and prototype vehicle integration.
📋 Contents
What Is Molex 111146-3030 HSAutoLink II LVDS Cable?
The Molex 111146-3030 HSAutoLink II 12 Pin LVDS cable is a dual-ended automotive high-speed cable assembly designed for 4-pair LVDS differential signal transmission. It uses HSAutoLink II unsealed plug connectors on both ends and is commonly specified in automotive display, camera, ADAS and electronic control applications.
Premier Cable PCM-GY-0003 is a 2-meter HSAutoLink II 12-circuit LVDS cable assembly compatible with Molex original part number 111146-3030. It is built with a 4-pair LVDS cable structure, 28 AWG conductors, Polarization A, and plug-to-plug configuration for reliable high-speed differential signal connection.
Buyer focus: This cable is not a generic automotive wire harness. It is a 12-position HSAutoLink II 4-pair LVDS cable assembly for high-speed differential signal transmission in automotive and transportation electronics.
Why 4-Pair LVDS Matters in Automotive Systems
Automotive displays, camera modules, image processors and electronic control units often require stable high-speed signal transmission. LVDS technology uses differential signaling to improve noise immunity and reduce electromagnetic interference compared with many single-ended signal methods.
A 4-pair LVDS cable structure is suitable for applications that require multiple differential signal paths between two automotive electronic modules. In vehicles, this can include display links, camera links, infotainment modules, driver assistance systems, ECU communication and prototype validation platforms.
Typical Applications
PCM-GY-0003 is suitable for vehicle electronic systems and industrial platforms that require reliable high-speed differential signal transmission through a compact HSAutoLink II plug-to-plug interface.
Automotive Infotainment
Head units
Multimedia controllers
Digital instrument clusters
Rear-seat entertainment systems
ADAS & Camera Systems
Surround-view cameras
Rear-view cameras
Driver monitoring systems
Image processors and domain controllers
Display & ECU Connectivity
LCD and TFT display modules
Touchscreen interfaces
ECU-to-display links
Gateway and distributed electronics
Commercial Vehicles
Buses and trucks
Agricultural machinery
Construction equipment
Mining and specialty vehicles
Industrial Systems
Industrial displays
Embedded controllers
Machine interfaces
Data acquisition equipment
R&D and Validation
Automotive R&D
Bench testing
Prototype vehicle integration
Validation and test platforms
Technical Specifications
The following specifications help buyers confirm whether PCM-GY-0003 matches the project requirement before sending an RFQ or drawing.
How Buyers Avoid Selecting the Wrong Cable
HSAutoLink cable assemblies may look similar from the connector shape, but the internal cable structure and signal definition can be very different. A USB cable, Ethernet cable and LVDS cable cannot be selected only by outer appearance.
Before ordering a replacement or compatible cable assembly, buyers should confirm the reference part number, signal type, pair count, pin assignment, polarization, cable length and application environment.
Important: Molex 111146-3030 refers to the HSAutoLink II 12 Pin 4-Pair LVDS configuration. Do not select it only by connector appearance if the project requires USB, Ethernet or another signal structure.
Premier Cable PCM-GY-0003 Product Introduction
Premier Cable PCM-GY-0003 is a 2-meter HSAutoLink II 12 Pin LVDS cable assembly designed as a compatible cable solution for Molex 111146-3030 applications. It uses HSAutoLink II unsealed plug connectors on both ends and a 4-pair 28 AWG LVDS cable construction for automotive high-speed signal connection.
Premier Cable PCM-GY-0003
HSAutoLink II 12 Pin LVDS Cable Assembly, 2M
Compatible with Molex 111146-3030, this dual-ended cable assembly is suitable for automotive display, camera, ADAS, ECU and development platform applications.
HSAutoLink II unsealed plug to unsealed plug
12 circuits, Polarization A
4-pair LVDS cable construction
28 AWG, 2 meters
36V max, 1.5A per contact
RFQ Checklist for HSAutoLink II LVDS Cable Assemblies
To quote the correct HSAutoLink II LVDS cable assembly, please confirm the following details before sending an inquiry.
Information Needed for Quotation
Reference part number, such as Molex 111146-3030
Connector type and polarization
Signal type: LVDS, USB, Ethernet or other
Circuit count and pair count
Cable length
Wire gauge requirement
Pin assignment or wiring definition
Shielding and EMI requirement
Application: display, camera, ADAS, ECU or testing
Sealed or unsealed connector requirement
Quantity
Drawing, photo or original sample if available
Need an HSAutoLink II LVDS Cable Compatible with Molex 111146-3030?
Premier Cable supplies automotive high-speed cable assemblies for displays, cameras, ADAS platforms, ECUs, prototype testing and transportation electronics. If you need Molex 111146-3030 compatible HSAutoLink II 12 Pin LVDS cable assemblies, send us your part number, drawing, pin assignment or sample photo for confirmation.
HSAutoLink II 12 Pin LVDS cable assembly
Compatible cable solution for Molex 111146-3030
4-pair LVDS 28 AWG cable construction
2-meter plug-to-plug standard configuration
Automotive display, camera, ADAS and ECU applications
Custom cable length and project-based cable assembly support
Frequently Asked Questions
Is PCM-GY-0003 compatible with Molex 111146-3030?
Yes. PCM-GY-0003 is designed as a compatible HSAutoLink II 12 Pin 4-Pair LVDS cable assembly based on Molex reference part number 111146-3030.
What is the cable length of PCM-GY-0003?
The standard cable length is 2 meters. Custom lengths may be discussed according to project requirements.
What is the difference between HSAutoLink II LVDS cable and USB cable?
The connector family may look similar, but the internal cable structure and signal definition are different. This product is a 4-pair LVDS cable assembly, not a USB cable.
Where is a 4-pair LVDS cable used in vehicles?
It can be used in automotive displays, infotainment systems, camera systems, ADAS modules, ECU communication, digital instrument clusters and prototype vehicle testing.
Can this cable be used for automotive camera systems?
Yes. It is suitable for high-speed LVDS signal transmission in camera and vision-related systems when the connector, pinout and electrical requirements match the equipment design.
Can the cable length or pinout be customized?
Yes. Premier Cable can support custom cable length, pin assignment, shielding structure and project-based cable assembly requirements based on drawings, photos or samples.
Source HSAutoLink II LVDS Cable Assemblies
Premier Cable supplies HSAutoLink II LVDS cable assemblies, automotive high-speed cable assemblies, display cables, camera cables and custom transportation cable solutions. Contact us with your drawings, photos or specifications to confirm the correct cable configuration.
