Product Specifications
| Parameter | Specification |
| Branch Quantity | 4 |
| Frequency Range | DC-5 GHZ |
| Cable Retention | 110N MIN |
| Continuity | 100% TEST |
| Branch Connector | TE 2302461-9 |
| Hi-Pot | 500 VRMS MIN |
| Product Code | PCM-XY-0013-X |
| Main Connector | ECT 818018063 |
| Temperature Range | -40°C TO 105°C |
| Main Connector Protection | IP67 Waterproof |
| Impedance | 100 OHM NOMINAL |
| Available Lengths | 0.5m, 1m and 2m |
| Product Type | ECT to 4 Way MATEnet Cable Assembly |
| Cable Model | ECT QFP12GD100-B-5G 2X0.13X105℃ Cable |
Connector Configuration and Design Features

One Main Interface with Four MATEnet Outputs
The defining feature of this assembly is its four branch configuration. One ECT 818018063 connector connects to four individual TE 2302461-9 MATEnet plugs. This integrated arrangement supports multiple connection points from a single main interface and provides a more organized harness solution for automotive Ethernet installations.
Original ECT and TE Connector Combination
The main interface uses the ECT 818018063 Jack Z Code connector, while the four branch ends use TE 2302461-9 MATEnet Plug Z Code connectors. Retaining the original manufacturer part numbers helps ensure accurate component identification and simplifies compatibility checks during engineering review and production preparation.


Waterproof Main Connector Design
The ECT main connector is specified with IP67 waterproof protection. Its housing and locking structure provide a secure connection design for automotive installation environments where connector protection is an important consideration. The specified IP67 rating refers to the main connector and does not independently establish the protection rating of the complete cable assembly.
Consistent Four Branch Wiring Arrangement
The eight pin positions of the main ECT connector are allocated to four individual MATEnet branches. Each branch receives a dedicated two conductor connection, with white and green wires assigned according to the engineering drawing. This defined wiring arrangement supports consistent assembly, connector identification and electrical inspection.

Automotive Applications and Customization Capabilities
Flexible Cable Length Selection
Three standard lengths are available to accommodate different installation distances and routing requirements. Customers can select 0.5m, 1m or 2m according to the actual distance between the main ECT connection and the four MATEnet connection points.
Distributed Module Connectivity
The four branch outputs provide individual connection paths for different installation locations. This configuration is suitable for vehicle network layouts involving multiple connected electronic units and helps consolidate the wiring arrangement into one integrated cable assembly.
Automotive Ethernet Network Connections
This cable assembly is intended for automotive Ethernet architectures requiring one main ECT interface to connect with four separate MATEnet interfaces. It can be incorporated into vehicle communication wiring systems where multiple electronic modules need dedicated network connection points.
Project Based Cable Development
Premier Cable can evaluate cable length, branch routing, connector arrangements and wiring requirements according to customer drawings. Customized configurations can be reviewed to meet specific vehicle installation requirements while maintaining the required connector compatibility and electrical specifications.
Product Drawing

Product FAQ
What cable lengths can customers choose from ?
The standard options are 0.5m, 1m and 2m, corresponding to PCM-XY-0013-0.5M, PCM-XY-0013-1M and PCM-XY-0013-2M respectively.
Does the cable assembly support waterproof applications ?
The main ECT 818018063 connector is specified with IP67 waterproof protection. The complete assembly protection level should be evaluated according to the actual installation and sealing requirements.
Which original connectors are used in this cable assembly ?
The main connector is ECT 818018063 Jack Z Code. The four branch connectors are TE 2302461-9 MATEnet Plug Z Code, following the original component specifications in the engineering drawing.
Can the four branch cable configuration be customized ?
Yes. Cable length, branch routing and connection requirements can be evaluated according to project drawings. Any changes to connector models or pin assignments require engineering confirmation before production.
What makes this ECT MATEnet cable different from a standard ECT cable ?
This assembly features four individual MATEnet branch connectors connected to one ECT main interface. Its one to four configuration is designed for automotive Ethernet systems requiring multiple connection destinations.
Hot Tags: ect ip67 waterproof 4 way matenet cable, China ect ip67 waterproof 4 way matenet cable manufacturers, suppliers, factory

