Product Specifications
| Parameter | Specification |
| Cable Retention | 110N Min |
| Connector 1 Part Number | 818018063 |
| Connector 2 Part Number | 818018063 |
| Continuity | 100% Test |
| Connector Configuration | ECT to ECT |
| Frequency Range | DC to 5GHz |
| Hi Pot | 500VRMS Min |
| Cable Specification | 2X0.13X105°C |
| Impedance | 100Ω Nominal |
| Cable Length Options | 0.5m, 1m, 2m |
| Product Number | PCM-XY-0017-X |
| Operating Temperature | -40°C to 105°C |
| Cable Model | ECT QFP12GD100-B-5G |
| Waterproof Rating | IP67 for Both ECT Connectors |
| Connector 1 | ECT Jack Z Code IP67 Waterproof |
| Connector 2 | ECT Jack Z Code IP67 Waterproof |
| Cable Structure | Direct Point to Point Connection |
| Product Type | Automotive Ethernet Cable Assembly |
Key Features & Connector Design

Identical ECT Connectors at Both Ends
PCM-XY-0017-X is equipped with two identical ECT Z Code connectors, both carrying original part number 818018063. Using the same connector specification at both ends creates a consistent interface arrangement for direct cable connections. This configuration is suitable for installations where matching ECT interfaces are required at both connection points, while the clearly identified original part number simplifies component selection and product integration.
IP67 Protection at Both Connection Points
Unlike cable assemblies with only one waterproof connector, this product uses ECT connectors with an IP67 waterproof rating at both ends. Each connector is designed to provide protection against dust and water ingress at its respective connection point. This arrangement is particularly relevant when both ends of the cable require protected interfaces, helping maintain consistent connector specifications throughout the complete connection.


Direct Wiring with Consistent Pin Assignment
The cable follows a direct point to point connection arrangement, with corresponding pin positions maintained between the two ECT connectors. The technical drawing identifies the individual wire connections for Pins 1 through 8, together with the shell grounding connections. This defined wiring layout provides a clear reference for cable assembly production, continuity inspection and installation, without introducing additional branch connections or intermediate connector interfaces.
Defined Electrical Requirements and Multiple Length Options
The assembly uses ECT QFP12GD100-B-5G cable with a nominal impedance of 100 ohms and a specified frequency range of DC to 5GHz. Its production requirements include a minimum 500VRMS Hi Pot test, 100% continuity testing and a minimum cable retention force of 110N. Available in 0.5m, 1m and 2m lengths, the cable can be selected according to the required connection distance and installation layout.

Applications & Product Benefits
Length Selection for Different Installation Requirements
The 0.5m, 1m and 2m versions accommodate different distances between connection points. Selecting an appropriate cable length helps avoid unnecessary excess cable during installation and allows the same connector configuration to be used across different wiring layouts.
Direct Connections Between Automotive Network Components
PCM-XY-0017-X is suitable for automotive Ethernet installations where two devices or connection points use matching ECT Z Code interfaces. Its direct cable arrangement provides a straightforward connection path without requiring additional branch connectors, making it practical for point to point network wiring.
Consistent Connector Specifications for Easier Integration
Both ends use the same ECT connector model and original part number, reducing connector variation within the assembly. This simplifies interface identification, component sourcing and cable replacement, while providing a consistent connection specification for automotive wiring system development.
Protected Interfaces on Both Sides of the Cable
With IP67 rated ECT connectors at both ends, the assembly provides environmental protection at two cable connection points. This configuration is useful in vehicle installations where both mating interfaces require protection against water ingress, rather than relying on protection at only one end.
Product Drawing

Product FAQ
Do both ends of this cable have an IP67 waterproof rating ?
Yes. Both ECT connectors are individually specified with an IP67 waterproof rating in the product drawing, providing protection against dust and water ingress at each cable connection point.
Are both connectors on the PCM-XY-0017-X cable assembly identical ?
Yes. Both ends use the same ECT Z Code connector, original part number 818018063. This provides matching interfaces at both connection points for direct automotive Ethernet cable connections.
What standard cable lengths can be supplied ?
PCM-XY-0017-X is available in 0.5m, 1m and 2m lengths, with respective tolerances of ±15mm, ±20mm and ±30mm. Other installation requirements can be discussed when configuring the cable assembly.
How are the two connectors electrically connected ?
The assembly uses a direct point to point wiring arrangement. Corresponding pin positions from Pin 1 through Pin 8 are connected according to the drawing, with the connector shells also assigned to grounding connections.
What are the electrical and mechanical requirements of this cable ?
The cable has a nominal impedance of 100 ohms and a frequency range of DC to 5GHz. Its specified requirements include a minimum 500VRMS Hi Pot test, 100% continuity testing and a minimum cable retention force of 110N.
Hot Tags: ect 818018063 ip67 waterproof ethernet cable, China ect 818018063 ip67 waterproof ethernet cable manufacturers, suppliers, factory

