Product Specifications
| Parameter | Specification |
| Cable Configuration | 1 to 4 |
| Cable Retention | 110N Min |
| Connector 1 Part Number | 818018063 |
| Continuity | 100% Test |
| Frequency Range | DC to 5GHz |
| Hi Pot | 500VRMS Min |
| Impedance | 100Ω Nominal |
| Cable Length Options | 0.5m, 1m, 2m |
| Product Number | PCM-XY-0016-X |
| Rosenberger Connector Part Number | E6S10A-1CAZ5-Z |
| Operating Temperature | -40°C to 105°C |
| Cable Model | ECT QFP12GD100-B-5G |
| Waterproof Rating | IP67 for ECT Connector |
| Connector 2, 3, 4, 5 | Rosenberger Z Code Connectors |
| Connector 1 | ECT Jack Z Code IP67 Waterproof |
| Product Type | Automotive Ethernet Cable Assembly |
Key Features & Connector Design

ECT Z Code Connector with IP67 Protection
The main connection point of PCM-XY-0016-X uses the original ECT Z Code connector, part number 818018063, which is specified with an IP67 waterproof rating. This provides dust and water ingress protection at the ECT interface, making it suitable for automotive installations where environmental protection is required at the main connection point. The original connector specification also supports accurate component identification and consistent interface matching during cable assembly production and vehicle network integration.
Four Rosenberger Connectors in a Single Assembly
Four Rosenberger connectors with the original part number E6S10A-1CAZ5-Z are arranged across the four branch cables. This configuration allows one ECT connection to serve four separate connector endpoints through a single cable assembly. By bringing the four branches together in one harness, the design provides a consolidated wiring arrangement for automotive Ethernet systems. The original connector part number also makes component identification and procurement reference more straightforward during project development.


Controlled Electrical Specifications for Automotive Ethernet
The assembly is designed with a nominal impedance of 100 ohms and a specified frequency range from DC to 5GHz. It uses ECT QFP12GD100-B-5G cable, with individual branch wiring and pin assignments defined in the technical drawing. The specified electrical inspection requirements include a minimum Hi Pot test of 500VRMS and 100% continuity testing. These defined parameters provide a clear basis for electrical verification and production quality control.
Defined Mechanical Requirements and Three Length Options
PCM-XY-0016-X specifies a minimum cable retention force of 110N and an operating temperature range from -40°C to 105°C. These requirements establish the mechanical and temperature conditions for the cable assembly. Three standard cable lengths are available: 0.5m, 1m and 2m, with different length tolerances specified for each version. This range allows the assembly to be selected according to installation distance and cable routing requirements while retaining the same ECT to four way Rosenberger connector configuration.

Applications & Product Benefits
Automotive Ethernet Network Distribution
PCM-XY-0016-X is designed for automotive Ethernet applications that require one main connection to branch into four separate network interfaces. Its four branch configuration provides a consolidated cable solution for vehicle communication systems using the specified ECT and Rosenberger connector combination.
Organized Multi Branch Wiring
Integrating four Rosenberger connectors into one cable assembly helps organize multiple network connections within a single wiring harness. This arrangement can reduce the need to manage several independent cable assemblies and provides a more centralized connection layout for automotive electrical system integration.
Protected Main Connection for Vehicle Installation
The ECT connector 818018063 features an IP67 waterproof design, providing protection against dust and water ingress at the main connection point. This makes the assembly suitable for installation locations where the ECT interface requires environmental protection, while the Rosenberger connectors provide four separate connection endpoints.
Flexible Installation Across Different Cable Routes
With 0.5m, 1m and 2m cable length options, the assembly accommodates different connection distances and installation layouts. Customers can select the appropriate length according to their vehicle wiring requirements while maintaining the same ECT to four way Rosenberger connector configuration.
Product Drawing

Product FAQ
What is the connector configuration of the PCM-XY-0016-X cable assembly ?
The assembly features one ECT Z Code connector connected to four Rosenberger Z Code branch connectors, providing a one to four connection arrangement for automotive Ethernet wiring.
Which original connector part numbers are used in this assembly ?
The main ECT connector is 818018063, while the four Rosenberger branch connectors use part number E6S10A-1CAZ5-Z. These original part numbers are specified in the product drawing and BOM.
What are the electrical specifications of this automotive Ethernet cable ?
The assembly has a nominal impedance of 100 ohms and a specified frequency range of DC to 5GHz. Its inspection requirements include a minimum 500VRMS Hi Pot test and 100% continuity testing.
Does the entire cable assembly have an IP67 waterproof rating ?
The IP67 rating is specifically specified for the ECT connector 818018063. The drawing does not provide an IP67 waterproof rating for the four Rosenberger branch connectors or the complete cable assembly.
What cable lengths are available for PCM-XY-0016-X ?
The assembly is available in 0.5m, 1m and 2m lengths, with individual length tolerances specified for each version. These options accommodate different vehicle installation distances and wiring layouts.
Hot Tags: ect 818018063 to rosenberger ethernet cable, China ect 818018063 to rosenberger ethernet cable manufacturers, suppliers, factory

