ECT Mini Fakra A Code to Quad Fakra Female IP67 Waterproof Cable

This Premier Cable assembly connects an ECT Mini Fakra 818018733 four cavity female connector to four ECT 818014116 straight Fakra female connectors. The black main housing uses A Code, while the four individual Fakra branches use Z Code.

Unlike versions with non waterproof branch terminations, this configuration features IP67 Waterproof connector interfaces at both ends. It addresses automotive camera harness installations where protection is required at the grouped connection and each individual branch connection. The specified protection depends on correct mating, sealing and assembly conditions.

Product Specifications

Protected Connections Across Four Camera Paths

Protection Extends to Every Branch
Each ECT 818014116 Fakra female termination features IP67 Waterproof protection, extending the protected interface arrangement beyond the main Mini Fakra housing. This distinction matters when the four branch connections are positioned outside a shared protected enclosure.

Separate Connections for Distributed Wiring
The four Fakra ends connect individually to corresponding male interfaces. Each branch can follow its own installation route, while the four cavity main connector keeps the equipment side grouped in one housing.

Consistent Connector Brand with Defined Coding
ECT connectors are used throughout the assembly. The main A Code interface and branch Z Code interfaces are specified separately, allowing purchasing and assembly teams to identify the required mating arrangement at each end.

Routing and Sealing Requirements

Plan Around the Complete Mated Connection
Allow space for each connector housing, mating operation and cable exit. Position the branches so that cable tension does not pull against the connections, and confirm sealing requirements with the intended mating connectors.

Choose Lengths for the Actual Harness Route
Listed lengths range from 0.1 m to 5 m. Confirm the measurement reference and individual branch dimensions rather than selecting solely from the direct distance between equipment ports. Custom lengths and breakout positions can be reviewed against a routing drawing.

Identify Each Coaxial Channel
Specify the relationship between the four Mini Fakra cavities and the four Fakra endpoints. Premier Cable accepts inquiries for branch identification labels, unequal branch lengths and cable model selection to match the project requirements.

Notes: Confirm pin assignment, channel mapping, mating connector details and IP67 Waterproof sealing conditions before ordering.

Product FAQ

What is the main difference from the ECT 818010602 branch version?
This version uses ECT 818014116 Fakra female branch connectors with IP67 Waterproof protection. The 818010602 branch version uses non waterproof terminations. Select according to the protection requirements at the individual connection points.

Does IP67 Waterproof protection apply when the connectors are disconnected?
Do not assume protection in the disconnected state. Confirm the specified mating and sealing conditions, including any protective caps required for unused or disconnected interfaces.

Does the four branch cable split one camera signal?
The cable carries four separate coaxial paths. Each branch connects to its assigned contact in the Mini Fakra housing according to the approved wiring drawing. It does not duplicate one signal across four outputs.

Can the four Fakra branches have different lengths?
Custom branch lengths can be reviewed. Supply the distance to each endpoint, the breakout position and the required connector clearance so the harness dimensions can be confirmed.

What should be checked before replacing an existing harness?
Compare connector part numbers, gender, coding, cavity mapping and cable dimensions. Confirm the camera link requirements and mating interface sealing conditions before selecting the replacement assembly.