ECT Mini FAKRA to Rosenberger HFM Female Camera Cable

This Premier Cable camera harness connects an ECT Mini FAKRA four cavity female interface to four Rosenberger HFM single cavity female ends. It adapts the grouped connection to individually positioned HFM interfaces through separate coaxial cable branches.

The connector combination addresses projects that specify ECT Mini FAKRA at the main connection and Rosenberger HFM at the remote ends. Waterproof construction applies to the grouped connector, while the nonsealed HFM terminations require appropriately protected connection locations.

Product Specifications 

ECT Mini FAKRA to Single Cavity HFM Structure

Four Coaxial Positions in One Body

ECT Mini FAKRA 818018737 combines four female coaxial positions behind a shared front insert within one Z Code housing.

Individual Rosenberger HFM Ends

Each AMK16A-1M4Z5-Z Z Code female has a single cavity housing, top latch and visible pink component beside the mating section.

Independently Positioned Branches

Separate coaxial cable runs allow the four HFM ends to reach different mating locations without imposing a fixed port spacing.

Applications & Customer Value

HFM Camera Harness Integration

Joins the specified ECT Mini FAKRA and Rosenberger HFM formats when the main equipment interface differs from the peripheral connections.

Distributed Coaxial Connection Points

Individual HFM ends accommodate separated mating positions around an assembly, allowing routing to follow the mechanical layout.

Camera Development Benches

Accessible branch connections allow engineers to arrange test interfaces and identify individual camera paths during setup.

Product FAQ

Q1. Does this cable combine four camera feeds into one signal?

The four cavity housing groups the physical connections. No video combining, switching or conversion function is confirmed.

Q2. Can an HFM branch be replaced directly with a standard FAKRA connector?

A replacement requires review of the corresponding mating interface. Connector family, geometry and coding must match the equipment connection.

Q3. Is this harness compatible with a specific camera or controller?

Compatibility requires the device mating references, channel assignment and electrical requirements. The supplied material does not confirm a particular device or video protocol.

Q4. Which technical details need confirmation before ordering?

Confirm cavity to branch mapping, selected cable, routing length and electrical limits. A specific IP rating is not supplied for the grouped connector or complete harness.

Q5. What customization can Premier Cable support?

Premier Cable supports connector type, gender, coding and housing review, plus cable length, jacket, shielding and structure selection. Electrical options include pin assignment, wiring definition, circuit configuration and applicable resistance or power requirements. OEM services cover drawing review, prototypes, mass production, labels and packaging.