Product Specifications
| Parameter | Specification |
| Characteristic Impedance | 90Ω |
| Casing Length | 20mm |
| Cable Outer Diameter | 4.6mm |
| Brand | Hirose |
| Axial Pull Strength | ≥110 N |
| Frequency Range | 480 MHz |
| Cable Length | 2000±20mm |
| Insulation Resistance | 100MΩ Min |
| Insertion and Extraction Durability | ≥25 cycles |
| Product Code | PCM-ZC-0235 |
| Connector 1 | GT17H-4S-2C |
| Connector 2 | GT17H-4S-2C |
| Connector 2 Shell | GT17H-4S-HU |
| Drawing Number | PCM-ZC-0235 |
| Connector 1 Shell | GT17HS-4S-HU |
| Operating Temperature | -40 to 105°C |
| Withstand Voltage | 500 V RMS Min |
| Single Wall Casing | OD 5.0mm, Black |
| Connector Configuration | Straight to Right Angle |
| Product Type | USB 2.0 GT17H Cable Assembly |
| Cable Construction | USB 2.0 (26#/1P+AM)+24#/2C+AB OD4.6MM |
Key Features and Connector Design

Dual Hirose GT17H Connector Configuration
Both cable ends incorporate GT17H-4S-2C connectors, creating a consistent interface across the assembly. The two connector positions are distinguished by their respective shell configurations, GT17HS-4S-HU and GT17H-4S-HU. This arrangement is designed for equipment with matching GT17H connection requirements and provides a dedicated cable solution without introducing an unnecessary interface conversion.
Straight to Right Angle Connection Layout
The assembly combines straight and right angle connector orientations to accommodate different connection directions within an equipment installation. This configuration can help manage cable exit positions when the available space around each connection point is different. It also provides greater flexibility when routing the cable between two interfaces located at different orientations.


USB 2.0 Cable Construction
The cable follows the specified USB 2.0 construction shown in the engineering drawing: USB 2.0 (26#/1P+AM)+24#/2C+AB OD4.6MM. The combination of the designated signal conductors and shielding construction supports the intended USB 2.0 interconnection. Its 4.6mm outer diameter provides a defined cable profile for integration into the equipment wiring arrangement.
Defined Mechanical and Electrical Performance
The assembly is specified with a 90Ω characteristic impedance, a minimum insulation resistance of 100MΩ and a withstand voltage of 500 V RMS minimum. Mechanical requirements include at least 25 insertion and extraction cycles and an axial pull strength of at least 110N. These specified characteristics provide measurable reference points for evaluating the cable assembly in its intended installation environment.

Applications and Customization Capabilities
Space Sensitive Cable Routing
The straight to right angle connector combination is useful when the two connection points have different orientation requirements. It helps accommodate equipment layouts where connector access and cable exit direction need to be considered together.
Equipment Interface Interconnection
The cable is suitable for USB 2.0 signal connections between electronic equipment incorporating compatible Hirose GT17H interfaces. Its dual connector arrangement provides a dedicated connection between two corresponding ports without requiring a separate conversion cable.
Automotive Electronic Equipment
The GT17H connector configuration makes this assembly suitable for compatible automotive electronic equipment and associated USB 2.0 connection systems. Its defined electrical and mechanical specifications provide a reference for integration into application specific wiring designs.
Cable Assembly Customization
Premier Cable can support project specific cable assembly requirements, including cable length, connector configuration, housing selection and cable construction. Customized solutions can be evaluated against the equipment interface, installation space and engineering drawing requirements.
Product Drawing

Product FAQ
Which Hirose connectors are used in the PCM-ZC-0235 cable assembly ?
The assembly uses GT17H-4S-2C connectors at both ends, with GT17HS-4S-HU and GT17H-4S-HU shells fitted respectively.
What is the specified cable length and outer diameter ?
The overall cable length is 2000±20mm, and the cable has a specified outer diameter of 4.6mm for equipment fit and routing clearance.
What makes this GT17H cable assembly different from a standard straight cable ?
It combines straight and right angle connector orientations, allowing the two ends to accommodate different connection directions within the equipment.
What electrical performance does this cable assembly provide ?
The specified values are 90Ω characteristic impedance, 100MΩ minimum insulation resistance, 480 MHz frequency range and 500 V RMS minimum withstand voltage.
Can Premier Cable customize this GT17H cable assembly ?
Yes. Cable length, connector configuration, housing selection and cable construction can be evaluated according to the customer's equipment requirements and engineering specifications.
Hot Tags: hirose gt17h right angle usb 2.0 cable, China hirose gt17h right angle usb 2.0 cable manufacturers, suppliers, factory

