Product Specifications
| Item | Specification |
| Number of Contacts | 4 |
| Characteristic Impedance | 90Ω |
| Cable Outer Diameter | 4.6mm |
| Connector Brand | Hirose |
| Axial Pull Strength | ≥110 N |
| Frequency Range | 480 MHz |
| Cable Length | 600±20mm |
| Packing Dimension | 120±20mm |
| Connector 1 | USB2.0 A/F |
| Insulation Resistance | 100 MΩ Min |
| Insertion and Extraction Durability | ≥25 cycles |
| DWG NO | PCM-ZC-0256 |
| Connector Shell | GT17HS-4S-HU |
| Operating Temperature | -40 to 105°C |
| Withstand Voltage | 500 V RMS Min |
| Connector 2 | GT17H-4S-2C(A) |
| Insulation Material | Transparent PE material |
| Outer Jacket Material | 45P PVC compound, black |
| Cable Construction | USB2.0 (26#/1P+AM)+24#/2C+AB OD4.6MM |
| Product Type | USB2.0 Type A Female to Hirose GT17H Cable Assembly |
Product Features and Interface Configuration

A Dedicated Connection for GT17H Equipment
PCM-ZC-0256 is configured for equipment that uses the Hirose GT17H interface but requires a separate USB access point. The equipment connection is based on the GT17H-4S-2C(A) connector, assembled with the GT17HS-4S-HU housing. This combination defines the mechanical interface at the equipment end rather than relying on a conventional USB connector at both ends. The specified A key configuration is an important selection detail when matching the assembly to an existing device. Retaining the complete connector identification helps prevent confusion between visually similar GT17H configurations during sourcing and installation.
USB Access Through a Type A Female Receptacle
Instead of terminating in a conventional USB plug, the external end of this assembly uses a USB2.0 Type A Female receptacle. This provides a convenient connection point for compatible USB equipment while the Hirose connector remains dedicated to the original equipment interface. The arrangement is particularly relevant when the USB connection needs to be brought away from an internal electronic module to a more accessible position. It offers a defined interface conversion through a purpose-built cable rather than requiring a separate adapter and additional connection point.


Defined Electrical Paths Across Four Contacts
The assembly follows a four contact USB wiring arrangement, with each conductor assigned to a specific electrical function. Red is used for VCC, white for D-, green for D+ and black for GND. The connector shells are also connected to GND according to the engineering drawing. This arrangement provides clear identification for cable termination and electrical inspection. The specified 90Ω characteristic impedance and 480 MHz frequency range are additional electrical reference values for evaluating the cable assembly against the requirements of the connected equipment. Actual system performance should be confirmed with the complete equipment interface.
Compact Cable Dimensions for Equipment Routing
A nominal cable diameter of 4.6mm and a finished length of 600±20mm define the physical layout of this assembly. The cable construction is specified as USB2.0 (26#/1P+AM)+24#/2C+AB OD4.6MM, with transparent PE insulation and a black 45P PVC compound outer jacket. These details establish the material and construction requirements for production. The defined length is useful when determining the distance between the equipment connection and the accessible USB receptacle, while the specified outer diameter provides a reference for cable routing and installation clearance.

Application Scenarios and Integration Options
Project Specific Manufacturing
Premier Cable can review alternative cable lengths, connector configurations, conductor assignments and material specifications according to customer engineering requirements. Drawings, existing cable samples and mating connector information can be used as references during prototype evaluation and production preparation.
Remote USB Connection Access
When an electronic module has a dedicated GT17H connection but its USB access point needs to be located elsewhere, this assembly provides a direct cable connection between the two interfaces. It can be considered for equipment layouts where the USB receptacle needs to remain accessible without placing the electronic module itself at the connection location.
Equipment Installation and Replacement
For equipment manufacturers and maintenance projects, the complete connector and housing identification provides a useful reference when selecting a replacement or developing a new cable. The 600mm cable length and 4.6mm outer diameter can be used during installation planning to assess connection distance, available routing space and receptacle positioning.
Automotive Electronic Equipment
The specified Hirose GT17H connector arrangement makes this assembly relevant to compatible automotive electronic modules and in-vehicle equipment. Potential integration areas include control electronics, embedded communication units and equipment requiring a dedicated USB connection. The actual application depends on the mating interface, wiring requirements and electrical compatibility of the target device.
Product Drawing

Product FAQ
What makes PCM-ZC-0256 different from a standard USB extension cable ?
PCM-ZC-0256 combines a USB2.0 Type A Female receptacle with a dedicated Hirose GT17H equipment connector. It is intended for devices requiring this particular mating interface rather than a standard USB connection at both ends.
How should the GT17H connector be identified when ordering ?
The specified connector is GT17H-4S-2C(A), assembled with the GT17HS-4S-HU housing. Both complete part numbers should be checked against the equipment interface to ensure the correct mechanical configuration.
Does the cable support both USB data and power connections ?
The drawing specifies four conductors assigned to VCC, D-, D+ and GND. This provides the basic USB power and data connection arrangement. Actual supported functions depend on the connected equipment and its USB implementation.
What electrical characteristics are specified for this assembly ?
The drawing lists a characteristic impedance of 90Ω, a frequency range of 480 MHz, insulation resistance of 100 MΩ Min and a withstand voltage of 500 V RMS Min. These values serve as the technical reference for assembly verification.
Can the 600mm cable length be modified for a different installation ?
Yes. Cable length can be reviewed according to the equipment layout and installation requirements. Alternative dimensions and construction details can be evaluated against the mating connector and electrical specifications before production.
Hot Tags: hirose gt17h-4s-2c(a) to usb 2.0 cable, China hirose gt17h-4s-2c(a) to usb 2.0 cable manufacturers, suppliers, factory

