Product Specifications
| Item | Specification |
| Characteristic Impedance | 90Ω |
| Cable Outer Diameter | 4.6mm |
| Axial Pull Strength | ≥110N |
| Number of Contacts | 4 Pins |
| Frequency Range | 480MHz |
| Insulation Resistance | 100MΩ Min |
| P1 Connector | USB2.0 A/M |
| Insertion and Extraction Durability | ≥25 Cycles |
| Drawing Number | PCM-ZC-0251 |
| Withstand Voltage | 500VRMS Min |
| P2 Connector Shell | GT17HS-4S-HU |
| Operating Temperature | -40°C to 105°C |
| Connector Brand | Hirose Original |
| P2 Connector | GT17H-4S-2C(A) |
| Cable Material | Transparent PE Material |
| PVC Compound | 45P PVC Compound, Black |
| Cable Construction | USB2.0 (26#/1P+AM)+24#/2C+AB |
| Single Wall Casing | Black, OD 5.0mm, Length 20mm |
| Product Type | USB2.0 Type A Male to GT17H 4 Pin Cable Assembly |
Product Features
USB2.0 Type A Male Interface
The P1 end features a USB2.0 Type A Male connector, providing a familiar connection interface for equipment fitted with a standard USB Type A port. The cable assembly connects this interface to the dedicated 4 pin Hirose GT17H connector at the opposite end. Its defined pin to pin wiring arrangement supports the intended power and signal connections shown in the engineering drawing. This configuration offers a practical interconnection solution for equipment designs requiring a USB Type A connection on one side and a compact GT17H interface on the other.
Original Hirose GT17H Connector
The P2 end uses the original Hirose GT17H-4S-2C(A) connector together with the matching GT17HS-4S-HU shell. Using the specified connector and shell part numbers helps maintain consistency with the product drawing and the intended mating interface. The compact 4 pin connector arrangement provides a dedicated connection point for the four defined conductors. This original Hirose connector configuration is suitable for applications specifying the GT17H series interface and requiring accurate component identification during product design, assembly, and procurement.
Defined Four Wire Pin Assignment
The cable assembly follows a defined four wire pin assignment between the USB2.0 Type A Male connector and the Hirose GT17H connector. Pin 1 uses a red wire for VCC, Pin 2 uses a white wire for D-, Pin 3 uses a green wire for D+, and Pin 4 uses a black wire for GND. The connector shells are also connected as GND according to the drawing. Clearly specified wire colors and pin correspondence help support assembly inspection, wiring verification, and consistent production quality.
Cable Construction and Protective Casing
The cable is specified with the construction code USB2.0 (26#/1P+AM)+24#/2C+AB and an outer diameter of 4.6mm. Its specified materials include transparent PE material and black 45P PVC compound. A black single wall casing with an outer diameter of 5.0mm and a length of 20mm is also included in the assembly design. These construction details define the cable and protective component configuration for production reference, helping maintain consistency in material selection, cable preparation, and finished assembly requirements.
Applications and Customization
Application Scenarios
Designed for electronic equipment requiring a USB2.0 Type A Male to Hirose GT17H 4 pin connection. This cable assembly provides a practical solution for equipment interconnection, internal wiring, and customized electronic cable harness applications.
Original Hirose Connector Configuration
The P2 end features the original Hirose GT17H-4S-2C(A) connector with the matching GT17HS-4S-HU shell. The specified connector configuration and defined pin assignment help ensure consistency with the engineering drawing and simplify assembly verification.
Customization Options
Cable length, connector arrangement, wire assignment, cable materials, and protective casing can be customized according to project requirements. Premier Cable supports drawing based development and cable assembly production to meet different equipment integration needs.
Product Drawing
Product FAQ
Which Hirose connector is used in this cable assembly ?
English: The P2 end uses the original Hirose GT17H-4S-2C(A) connector with the GT17HS-4S-HU shell.
What interfaces does the PCM-ZC-0251 cable connect ?
English: It connects a USB2.0 Type A Male interface at P1 to a 4 pin Hirose GT17H interface at P2.
What is the pin assignment of this cable ?
English: Pin 1 is VCC with a red wire, Pin 2 is D- with a white wire, Pin 3 is D+ with a green wire, and Pin 4 is GND with a black wire. The connector shells are connected as GND.
What is the outer diameter of the cable ?
English: The specified cable outer diameter is 4.6mm. The assembly also includes a black single wall casing with an outer diameter of 5.0mm and a length of 20mm.
Can Premier Cable customize the cable assembly ?
English: Yes. Customization requirements can be evaluated based on customer drawings and specifications, including cable length, connector configuration, cable construction, wire assignment, and protective casing requirements.
Hot Tags: hirose gt17h usb2.0 type a cable, China hirose gt17h usb2.0 type a cable manufacturers, suppliers, factory
