Product Specifications
| Item | Specification |
| Pin Count | 4 |
| Characteristic Impedance | 90Ω |
| P1 Gender | Male |
| Keying Type | A Key |
| Key Insert Color | Brown |
| Cable Outer Diameter | 4.6mm |
| Axial Pull Strength | ≥110N |
| Connector Brand | Hirose |
| Frequency Range | 480MHz |
| Contact Arrangement | Dual Row |
| Cable Length | 2000±20mm |
| Insulation Resistance | 100MΩ Min |
| Insertion and Extraction Durability | ≥25 Cycles |
| Premier Cable P/N | PCM-ZC-0261 |
| Withstand Voltage | 500VRMS Min |
| P2 Housing | GT17HN-4DS-HU |
| Operating Temperature | -40°C to 105°C |
| Insulation Material | Transparent PE |
| P2 Connector | GT17HN-4DS-2C(A) |
| Signal Assignment | VCC, D-, D+, GND |
| P1 Connector | USB2.0 Type A Male |
| Outer Jacket | Black 45P PVC Compound |
| Interface | USB2.0 Type A to GT17HN |
| Cable Construction | USB2.0 (26#/1P+AM)+24#/2C+AB |
| Custom Options | Subject to Engineering Review |
| Product Type | USB2.0 Type A Male to Hirose GT17HN Cable |
Product Features
Specified GT17HN Connector and Housing Combination
On the equipment end, a Hirose GT17HN-4DS-2C(A) connector is paired with a GT17HN-4DS-HU housing, and both part numbers should be specified together for replacements or mating interfaces. A brown A Key insert identifies the keying option, while the gray outer housing forms the locking shell. Since different GT17HN variants look visually similar, verifying exact part numbers prevents ordering or assembly errors.
Four Contact Dual Row Arrangement
The GT17HN interface houses four contacts in a two row layout, each mapped to a specific USB signal per the engineering drawing. Maintaining proper mating orientation and pin numbering is critical during wire termination and pre-shipment continuity testing. Confirming both the connector part number and pinout helps avoid miswiring or improper mating on the equipment side.
Defined USB Wiring and Shell Grounding
All four conductors follow standard USB color coding, with red for VCC, white for D-, green for D+, and black for GND, linking matching pins between the USB Type A male plug and the GT17HN connector. The drawing also specifies a GND connection across both connector shells for shielding continuity. This clear pinout supports incoming inspection, electrical verification, and smooth system integration.
Long Cable Configuration and Material Selection
Built to a finished length of 2000±20mm with a 4.6mm outer diameter, the assembly uses USB2.0 (26#/1P+AM)+24#/2C+AB cable construction with transparent PE insulation and a black 45P PVC jacket. These dimensions help engineers plan routing paths and check installation clearances between separated ports, while the specified materials serve as clear benchmarks for production and quality inspection.
Applications and Customization
Manufacturing and Production Support
Premier Cable can support drawing evaluation, prototype preparation, sample verification, production inspection and mass manufacturing. Product labeling and packaging can also be arranged according to confirmed project specifications.
Extended USB Connection
The 2000mm cable provides a connection path between a USB2.0 Type A host port and equipment fitted with a Hirose GT17HN interface. It can be considered for equipment layouts where the two connection points are separated by a longer routing distance.
Dedicated Equipment Interface
The GT17HN-4DS-2C(A) connector and GT17HN-4DS-HU housing form the specified equipment side configuration. The A Key insert helps identify the intended mating arrangement when selecting components for equipment using different GT17HN connector versions.
Cable Assembly Development
Premier Cable supports OEM cable assembly development based on customer drawings, samples and engineering requirements. Connector selection, housing references, cable length, pin assignment, conductor construction, shielding requirements and jacket materials can be reviewed during project development.
Product Drawing
Product FAQ
How are the four contacts arranged at the GT17HN end ?
The equipment side has four contacts arranged in two rows. Their positions correspond to the VCC, D-, D+ and GND connections specified in the PCM-ZC-0261 engineering drawing.
What is the wiring relationship between the USB plug and GT17HN connector ?
The red wire carries VCC, white carries D-, green carries D+ and black carries GND. Corresponding pins are connected at both ends, with the connector shells also connected to GND.
What installation dimensions should be considered for this cable ?
The finished cable length is 2000±20mm and the outer diameter is 4.6mm. Equipment designers should account for the cable routing distance, available clearance and connector installation space.
Which Hirose connector and housing are used in PCM-ZC-0261 ?
The equipment side uses the Hirose GT17HN-4DS-2C(A) connector with the GT17HN-4DS-HU housing. Both original component numbers should be checked when matching the complete connector assembly.
Can Premier Cable manufacture alternative versions of this assembly ?
Yes. Premier Cable can review alternative cable lengths, connector configurations, wiring assignments and cable materials according to customer drawings. Prototype preparation and production can be arranged after engineering requirements are confirmed.
Hot Tags: hirose gt17hn-4ds-hu usb cable, China hirose gt17hn-4ds-hu usb cable manufacturers, suppliers, factory
