Product Specifications
| Item | Specification |
| Characteristic Impedance | 90Ω |
| Cable Outer Diameter | 4.6mm |
| Axial Pull Strength | ≥110N |
| Number of Contacts | 4 Pins |
| Frequency Range | 480MHz |
| Cable Length | 600±20mm |
| Insulation Resistance | 100MΩ Min |
| P1 Connector | USB2.0 A/F |
| Insertion and Extraction Durability | ≥25 Cycles |
| Drawing Number | PCM-ZC-0253 |
| Withstand Voltage | 500VRMS Min |
| P2 Connector Shell | GT17HS-4S-HU |
| P2 Connector | GT17H-4S-2C(A) |
| Operating Temperature | -40°C to 105°C |
| Connector Brand | Hirose Original |
| Cable Material | Transparent PE Material |
| PVC Compound | 45P PVC Compound, Black |
| Cable Construction | USB2.0 (26#/1P+AM)+24#/2C+AB |
| Single Wall Casing | Black, OD 5.0mm, Length 20mm |
| Product Type | USB2.0 Type A Female to GT17H 4 Pin Cable Assembly |
Product Features
USB Type A Female Receptacle Design
The USB Type A Female end provides a receptacle interface for connecting a compatible USB Type A plug. This configuration is intended for equipment that needs a female USB connection point rather than a directly attached male plug. It allows the USB interface to be positioned at a suitable location through the 600±20mm cable assembly, supporting more flexible equipment connection layouts.
Defined 600mm Cable Configuration
The assembly uses a specified cable length of 600±20mm and an overall cable diameter of 4.6mm. Its length provides a defined connection distance between the USB Type A Female receptacle and the Hirose GT17H connector. The black outer jacket and additional 20mm black single wall casing are specified as part of the cable construction, providing a consistent physical configuration for equipment integration.
Original Hirose GT17H Connector Combination
The cable side uses the original Hirose GT17H-4S-2C(A) connector together with the GT17HS-4S-HU shell. This specified connector combination provides the 4 pin interface required by the assembly. Retaining the designated connector and shell part numbers helps equipment designers identify the mating component configuration and maintain consistency when specifying replacement or production cable assemblies.
Four Conductor USB2.0 Wiring
The internal cable construction is specified as USB2.0 (26#/1P+AM)+24#/2C+AB, with a 4.6mm outer diameter. The four conductors follow the defined VCC, D-, D+ and GND pin assignment between the two connectors. Red, white, green and black wires are used for the corresponding circuits, while the connector shells are connected to ground according to the drawing.
Applications and Customization
Equipment Integration and USB Interface Extension
PCM-ZC-0253 is intended for equipment designs that require a USB Type A Female receptacle connected to an internal Hirose GT17H interface. The female USB end can serve as an accessible connection point, while the Hirose connector provides the specified cable side interface for the equipment.
Typical integration scenarios may include:
-
Industrial electronic equipment with a USB Type A Female connection point.
-
Embedded devices requiring an extended USB receptacle.
- Control units and electronic assemblies using a Hirose GT17H 4 pin interface.
- Equipment with a defined 600mm cable routing requirement.
For projects requiring different cable lengths, connector combinations, wire specifications or cable routing arrangements, Premier Cable can review the application requirements and evaluate a suitable customized cable assembly.
Product Drawing
Product FAQ
What is the specified cable length ?
The specified finished cable length is 600±20mm. This dimension defines the cable assembly length between the USB Type A Female end and the Hirose GT17H connector end.
Which Hirose connector and shell are used ?
The cable uses the original Hirose GT17H-4S-2C(A) connector with the GT17HS-4S-HU shell. The combination provides the specified 4 pin connection interface for this assembly.
How are the four wires connected ?
The red wire connects VCC, white connects D-, green connects D+, and black connects GND. The pin assignments follow Pin 1 through Pin 4 at both connector ends, with shell to shell grounding.
What is the difference between this cable and a USB Type A Male version ?
PCM-ZC-0253 uses a USB2.0 Type A Female receptacle, allowing connection with a compatible USB Type A Male plug. It is intended for equipment requiring a female USB connection point, while a Male version provides a plug interface.
What are the cable construction and main performance specifications ?
The cable construction is USB2.0 (26#/1P+AM)+24#/2C+AB, with a 4.6mm outer diameter, transparent PE insulation and black PVC outer jacket. Its specified characteristic impedance is 90Ω, with an operating temperature range of -40°C to 105°C.
Hot Tags: hirose gt17h usb female cable assembly, China hirose gt17h usb female cable assembly manufacturers, suppliers, factory
