Product Specifications
| Item | Specification |
| Housing Color | Water blue |
| Straight Female P/N | 99K11D-1D5A5-Z |
| Straight Male P/N | 99S16D-1D5A5-Z |
| Right Angle Female P/N | 99K20K-1D5A5-Z |
| Impedance | 100 ohm differential |
| Conductor Material | Tinned stranded copper, oxygen free |
| Length Options | 0.1 m, 0.5 m, 1 m, 2 m, 3 m, custom on request |
| Connector Brand | Rosenberger TE replacement, domestic equivalent |
| Cable | Domestic equivalent of LEONI Dacar 535, 100 ohm |
| Cable Construction | Non UL 26AWG 4C plus AB, tinned stranded copper |
| Product Type | HSD plus 2 pin LVDS video cable for BMW NBT EVO |
| Vehicle Fitment | BMW NBT EVO head units, 3 Series, 5 Series, 7 Series |
| Function | 4 HSD pins for LVDS video, 2 extra pins for power via red wire |
| Config 2 | Straight female to straight male, straight wire order 1-1, 2-2, 3-3, 4-4, 5-5, 6-6 |
| Config 1 | Straight female to straight female, crossed wire order 1-4, 2-3, 3-2, 4-1, 5-5, 6-6 |
| Config 3 | Straight female to right angle female, crossed wire order 1-4, 2-3, 3-2, 4-1, 5-5, 6-6 |
| Config 4 | Right angle female to right angle female, crossed wire order 1-4, 2-3, 3-2, 4-1, 5-5, 6-6 |
Available Configurations
Straight Female to Straight Female
Both ends are the HSD plus 2 pin straight female, part number 99K11D-1D5A5-Z. The wire order is crossed on the video pins, 1 to 4, 2 to 3, 3 to 2, 4 to 1, with power pins 5 and 6 straight.
Use it as a pigtail extension when a factory HSD plus 2 pin pigtail on the head unit or screen is too short. The female to female gender keeps both factory pigtails unchanged, and the crossed video order matches the NBT EVO LVDS pinout. The 0.1 m and 0.5 m lengths fit tight behind the dashboard, while the 2 m and 3 m runs reach the trunk or rear screen.
Straight Female to Straight Male
One end is the HSD plus 2 pin straight female, part number 99K11D-1D5A5-Z, and the other end is the straight male, part number 99S16D-1D5A5-Z. The wire order is straight, 1 to 1, 2 to 2, 3 to 3, 4 to 4, 5 to 5, 6 to 6.
Use it as an inline adapter when one device has a male pigtail and the other has a female socket. The straight female accepts a factory male pigtail, and the straight male plugs into a female socket. The straight wire order is used when the video path does not need crossover. The 0.1 m to 3 m range covers everything from a tight dashboard jump to a full trunk run.
Straight Female to Right Angle Female
One end is the straight female, part number 99K11D-1D5A5-Z, and the other end is the right angle female, part number 99K20K-1D5A5-Z. The wire order is crossed on the video pins, 1 to 4, 2 to 3, 3 to 2, 4 to 1, with power pins 5 and 6 straight.
Use it when one side needs a low profile bend to clear a tight corner behind the dashboard or center console. The straight female goes to the easy to reach side, and the right angle female tucks into the narrow space behind the screen or head unit. The crossed video order matches the NBT EVO LVDS path, and the 0.1 m to 3 m range fits most routing jobs.
Right Angle Female to Right Angle Female
Both ends are the HSD plus 2 pin right angle female, part number 99K20K-1D5A5-Z. The wire order is crossed on the video pins, 1 to 4, 2 to 3, 3 to 2, 4 to 1, with power pins 5 and 6 straight.
Use it when both sides sit in tight spaces where a straight plug would not fit, such as behind a recessed screen or a deeply mounted head unit. The right angle housing keeps the cable flat against the panel on both ends, reducing stress on the connector. The 0.1 m to 3 m range covers tight bench jumps to full dashboard runs.
Applications
| Application | How It Is Used | What It Enables |
| Aftermarket screen retrofit | Run a new video line to a larger or upgraded BMW display. | Fits factory NBT EVO ports with no adapter. |
| Head unit relocation | Extend the video line when the head unit moves deeper into the dash. | Keeps the LVDS signal clean through the longer run. |
| Retrofit shop stock | Carry all four angle and gender options for BMW video jobs. | One SKU family covers most 3 5 7 Series video calls. |
| Bench test rig | Wire BMW head units and screens on the workbench for R and D. | Repeatable certified video jumpers instead of hand built wires. |
| NBT EVO screen repair | Replace a damaged LVDS video line between head unit and screen. | Restores a blank or flickering screen without replacing the whole harness. |
Closing line: because both ends are the same HSD plus 2 pin interface on the 100 ohm shielded Dacar 535 equivalent cable, the LVDS video and power run clean end to end.
Professional Services
Fast sampling: small batch samples in days, production volumes on a confirmed lead time.
Wire order customization: crossed or straight as listed. Custom pinouts quoted on request.
Length customization: 0.1 m to 3 m in stock. Non standard cut lengths built to your drawing.
Configuration customization: 4 angle and gender combinations as shown. Other combinations quoted on request.
Quality before dispatch: 100 percent continuity and shielding continuity tested on every assembly before dispatch.
OEM and bulk support: BMW retrofit shops, car audio installers and fleet integrators get volume pricing and private label packaging.
Product FAQ
Q1: Which BMW models is this cable for?
It is designed for BMW NBT and EVO head units in 3 Series, 5 Series and 7 Series vehicles that use the HSD plus 2 pin connector for LVDS video to the central screen.
Q2: What does the plus 2 pin mean?
The HSD connector has 4 pins for LVDS video, and 2 extra pins on the side for screen power, which run through the red wire. This is why the cable looks like a black line with a red wire alongside.
Q3: Which wire order do I need?
Configs 1, 3 and 4 use crossed video order, which matches the NBT EVO LVDS pinout. Config 2 uses straight order. If you are unsure, tell us your head unit and screen model and we will recommend the matching version.
Q4: What is the difference between the four configurations?
Config 1 is straight female to straight female for pigtail extension. Config 2 is straight female to straight male for inline adaptation. Config 3 is straight female to right angle female for tight corners. Config 4 is right angle female to right angle female for low profile routing.
Hot Tags: bmw nbt evo hsd lvds video cable, China bmw nbt evo hsd lvds video cable manufacturers, suppliers, factory
