Product Specifications
| Parameter | Specification |
| Cable Configuration | 4 Pole |
| Cable Length | xxxx mm |
| Country of Origin | Germany |
| Cable Type | DACAR 535 |
| Application | Automotive |
| Brand | Rosenberger |
| Product Series | RosenbergerHSD® |
| Product Number | LD5-226-xxxx-y-y |
| Armouring | Without Armouring |
| Side A Coding | G, H, J, K, L, M, O |
| Side B Coding | A, B, C, D, E, F, Z |
| Side A Connector | 90° HSD Jack, Cable Up |
| Side A Compatibility | Only Mateable with Plugs |
| Product Type | Automotive Cable Assembly |
| Side B Connector | 90° HSD Jack, Cable Right |
Product Features and Connector Design

Upward and Rightward Exit Geometry for Different Interface Positions
The LD5-226 combines two RosenbergerHSD® 90 degree jack connectors with different cable exit directions. Side A features an upward exit, while Side B uses a rightward exit. This arrangement is intended for connection layouts where the two mating points have different spatial orientations and require separate cable approach paths. Rather than relying on a symmetrical connector arrangement, the assembly provides a defined combination that engineers can evaluate against equipment positioning, available clearance and cable routing requirements. Identifying the two connector positions separately is essential when selecting the LD5-226 for a specific automotive installation.
Side Specific Coding and Plug Only Compatibility
The connector coding arrangement is a major selection consideration for the LD5-226. Side A supports G, H, J, K, L, M and O coding and is only mateable with compatible plugs. Side B supports A, B, C, D, E, F and Z coding. These different coding groups require separate verification rather than treating both ends as interchangeable. The connectors are integrated through DACAR 535 4 pole cable in an unarmoured construction. The xxxx field identifies cable length in millimeters, while y-y represents the coding combination of the two ends. Confirming both connector codes and the required mating interfaces helps customers specify the correct assembly for their equipment.

Applications and Supply Support
Automotive Electronic Connection Layouts
The LD5-226 provides an HSD cable connection option for automotive electronic systems requiring upward and rightward cable exit directions at opposite ends. Its specific connector geometry offers an alternative for equipment layouts where a symmetrical routing arrangement is not suitable.
Genuine Rosenberger Product Sourcing Through PCM
PCM supplies genuine Rosenberger connectivity products for professional B2B purchasing requirements. Customers can submit the LD5-226 reference, required cable length, Side A and Side B coding, compatible mating plug details, purchasing quantity and delivery destination to discuss product identification and quotation arrangements.
Mating Interface and Coding Verification
The different coding groups at Side A and Side B make connector verification particularly important. Side A must be matched with a compatible plug, while both ends require the correct coding selection. Engineering teams should confirm the mating component type and connector coding before integrating the assembly into their equipment or harness design.
Automotive OEM and Tier Supplier Procurement
For automotive OEMs, Tier 1 and Tier 2 suppliers, system integrators and harness manufacturers, the LD5-226 provides a defined HSD cable configuration with different connector orientations and separate coding ranges. Specifying the cable length and coding at both ends helps purchasing teams distinguish the intended variant for development, production and replacement sourcing.
Frequently Asked Questions
Which coding options are available for each connector ?
Side A supports G, H, J, K, L, M and O coding, while Side B supports A, B, C, D, E, F and Z. The required codes should be specified separately.
Which cable specification is used in this assembly ?
The LD5-226 incorporates DACAR 535 4 pole cable in an unarmoured construction. Its xxxx ordering field represents the cable length in millimeters.
What is the mating restriction on Side A ?
Side A is only mateable with compatible plugs. Customers should verify the plug type and coding before selecting the assembly for their equipment.
What are the cable exit directions of the LD5-226 ?
Side A features a 90 degree HSD jack with an upward cable exit, while Side B uses a 90 degree HSD jack with a rightward cable exit. This creates different routing directions at the two ends.
What information is needed for an LD5-226 quotation ?
Please provide the required cable length, Side A and Side B coding, compatible mating plug requirements, purchasing quantity and delivery destination. PCM can use these details to support product identification and quotation inquiries.
Hot Tags: rosenberger ld5-226-xxxx-y-y cable, China rosenberger ld5-226-xxxx-y-y cable manufacturers, suppliers, factory

