Product Specifications
| Parameter | Confirmed Information |
|---|---|
| Signal Type | RF |
| Common Connector P/N | 2355843-1 |
| Version 1 SMA Model | SMA-J2-3 |
| Version 2 SMA Model | SMA-KY-2 |
| Connector Orientation | Straight at both ends |
| Coding | AMPSEAL16 interface: A Code |
| Cable Type | LEONI Dacar302-4 coaxial cable |
| Gender | Female to male; female to female |
| Product Type | Automotive RF adapter cable assembly |
| Interface | Single cavity AMPSEAL16 interface to SMA |
| Connector Type | 2355843-1 female with SMA male or female |
| Custom Options | Cable length; other requirements subject to review |
The 2355843-1 endpoint is identified as a sealed design. No protection rating is provided for the SMA endpoint or the complete cable assembly.
Available Configurations
AMPSEAL16 Interface Female to SMA Male Cable
Connection Structure
2355843-1 single cavity straight female, A Code, to SMA-J2-3 straight male.
Unique Difference
The SMA end has an internally threaded coupling nut and a male center contact, providing a direct connection to a corresponding SMA female interface.
Suitable Installation
For bench equipment or fixtures where the cable connects directly to an accessible SMA female port.
AMPSEAL16 Interface Female to SMA Female Bulkhead Cable
Connection Structure
2355843-1 single cavity straight female, A Code, to SMA-KY-2 straight female.
Unique Difference
The SMA end has an externally threaded body, female center contact and visible mounting hardware, allowing the connection point to be fixed at a panel.
Suitable Installation
For test boxes or equipment enclosures that need an externally accessible SMA port. Panel hole size and thickness must be confirmed from the connector drawing.
Applications & Customer Value
Automotive Camera Development
Engineering teams may need to connect a camera harness to an SMA based evaluation setup. This assembly provides a connection option between the specified automotive endpoint and the selected test interface, subject to the system's electrical requirements.
RF Measurement Access
A dedicated test connection helps place the measurement point within reach of the operator. The cable can bring the equipment interface out to a more convenient location when the test arrangement permits.
Test Fixture Panel Connections
Repeated testing benefits from an accessible, fixed connection point. The SMA female bulkhead version allows the fixture designer to position that point on the enclosure rather than leave the connector loose inside.
Prototype Equipment Integration
During prototype assembly, instrument position and enclosure layout may change. Selecting the appropriate SMA end and cable length helps accommodate the planned arrangement before the production routing is finalized.
Product Features
Housed Automotive Interface
The automotive endpoint uses a molded outer housing surrounding the coaxial mating interface, with external retention features visible in the product images.
Straight Cable Exit Design
Both endpoints feature straight cable exit designs. Installation layouts should provide sufficient clearance space behind each connector to accommodate proper cable routing and support.
Covered SMA Cable Entries
Protective sleeves cover the cable entry areas at both SMA terminations. The supplied images do not identify the sleeve material or its environmental rating.
Specified Coaxial Cable Specifications
Both versions are specified with LEONI Dacar302-4, providing a common and consistent cable reference for assembly drawings and accurate material control procedures.
Customization Capabilities
Premier Cable supports:
Connector Customization
Connector type, gender, coding and housing arrangement can be reviewed against the equipment interface. SMA connection and mounting requirements can be selected according to the intended fixture or enclosure design.
Cable Customization
Cable length, jacket, shielding and cable structure can be evaluated against routing and electrical requirements. Any alternative to the specified Dacar302-4 cable requires confirmation before sample approval.
Electrical Customization
Contact assignment, wiring definition and circuit configuration can be reviewed from project drawings. Resistance values and power ratings can be evaluated where additional electrical components are required, subject to engineering feasibility.
OEM Manufacturing
Premier Cable supports drawing review, prototype assembly and mass production against approved specifications. Labels and packaging can identify cable versions, project references and production batches.
Product FAQ
Q1: Is this a complete camera interface converter?
The supplied information describes a connector cable assembly. It does not identify signal processing electronics or establish protocol conversion capability.
Q2: Are these SMA or RP-SMA connectors?
These versions use standard SMA contact arrangements: a center pin with internal coupling threads on the male version, and a center socket with external threads on the female version.
Q3: Can it be connected directly to any SMA test instrument?
Mechanical connection alone does not establish suitability. Instrument impedance, operating frequency and the connected system's electrical conditions must also be checked.
Q4: How should insertion loss and return loss requirements be specified?
Include the frequency range, cable length, acceptance limits and test method in the inquiry so Premier Cable can review the requirements before sample approval.
Q5: What information is needed for a custom sample?
Provide the selected version, mating interface details, required length and tolerance, routing or panel drawing, electrical test requirements and expected quantity.
Hot Tags: ampseal16 to sma cable, China ampseal16 to sma cable manufacturers, suppliers, factory
