Product Specifications
| Parameter | Confirmed Information |
|---|---|
| Signal Type | RF |
| Common Connector P/N | 2355843-1 |
| Version 1 Endpoint P/N | 59Z163-003Z |
| Version 2 Endpoint P/N | 59Z176-C01Z |
| Version 3 Endpoint P/N | 1-2392990-4 |
| Pin Count | Not Provided |
| Interface | Single cavity coaxial interfaces |
| Gender | Female to female; female to male |
| Product Type | Automotive RF coaxial cable assembly |
| Cable Type | LEONI Dacar302-4 automotive coaxial cable |
| Connector Type | AMPSEAL16 interface connector to FAKRA connector |
| Custom Options | Cable length customization indicated in supplied images; other options require project review |
Available Configurations
AMPSEAL16 Interface Female to Sealed FAKRA Straight Female Cable
Connection Structure
2355843-1 straight female connector to Rosenberger type 59Z163-003Z sealed FAKRA straight female connector, FAKRA Z Code.
Unique Difference
This version provides female interfaces at both ends while transitioning between the AMPSEAL16 interface housing and the Rosenberger type FAKRA housing.
Suitable Installation
For a remote male mating port with enough clearance to route the cable directly behind the straight connector.
AMPSEAL16 Interface Female to Sealed FAKRA Straight Male Cable
Connection Structure
2355843-1 straight female connector to Rosenberger type 59Z176-C01Z sealed FAKRA straight male connector, FAKRA Z Code.
Unique Difference
The remote male interface serves equipment fitted with a female mating connection. It is the male endpoint option within this product range.
Suitable Installation
For harness junctions or equipment ports requiring a male cable connector and an axial cable exit.
AMPSEAL16 Interface Female to Sealed FAKRA Right Angle Female Cable
Connection Structure
2355843-1 straight female connector to TE type 1-2392990-4 sealed FAKRA right angle female connector, FAKRA Z Code.
Unique Difference
The connector body redirects the cable at the remote endpoint, changing the routing geometry compared with the two straight versions.
Suitable Installation
For recessed ports or equipment mounted near a surrounding panel, where the cable needs to leave alongside the equipment rather than extend directly behind the port.
Applications & Customer Value
Commercial Vehicle Camera Connections
Camera installations exposed to moisture require environmental protection across the complete mating connection. These cable options provide sealed connector structures at both ends for integration into the vehicle's specified harness design.
Equipment with Different Mating Ports
Vehicle platforms may use camera modules with different connector genders. Selecting the appropriate endpoint allows the harness to match the equipment port while retaining the common 2355843-1 connection.
Restricted Camera Mounting Spaces
Cameras installed close to body panels or mounting brackets can leave limited room for cable routing. The right angle endpoint provides an alternative cable exit direction for these locations.
Vehicle Harness Development
Prototype builds need connector selection, routing length and installation space to be checked together. Clearly identified configurations help engineering and purchasing teams carry the approved connection arrangement into production.
Product Features
Identified Coaxial Cable Construction
The supplied material specifies LEONI Dacar302-4. Retaining the exact cable designation in the assembly BOM helps prevent incorrect substitution based only on external appearance or cable diameter during production and quality control.
Connector Housings with Retention Features
The product images show housed connector interfaces with external retention features. Their mating dimensions and engagement requirements should be checked against the selected counterpart during drawing review.
Sealed Designs at Both Endpoints
Each listed version pairs the common sealed connector with a sealed remote connector. The environmental performance of the connection also depends on the mating component, cable termination and assembly condition.
Version-specific Connector Traceability
Each remote endpoint has its own supplied part number. This provides a clear and traceable reference for incoming inspection, assembly documentation and version control throughout the manufacturing process.
Customization Capabilities
Premier Cable supports:
Connector Customization
Connector type, gender, coding and housing arrangement can be reviewed against the equipment's mating interface. Straight and right angle options can be selected according to cable exit direction and available installation space.
Cable Customization
Cable length, jacket, shielding and cable structure can be specified around the vehicle routing requirements. The supplied Dacar302-4 configuration provides a reference for evaluating any proposed cable changes.
Electrical Customization
Contact assignment, wiring definition and circuit configuration can be reviewed against the project drawing. Resistance values and power ratings can also be evaluated for designs requiring additional electrical components, subject to engineering feasibility.
OEM Manufacturing
Premier Cable supports drawing review, prototype assembly and mass production against approved specifications. Labels and packaging can be arranged to identify cable versions, simplify incoming inspection and support production or service supply.
Product FAQ
Q1: What does "AMPSEAL16 interface" refer to in this product?
It is the interface description used in the supplied connector material. It should not be treated as confirmation that the cable mates with every product carrying the AMPSEAL16 name.
Q2: Can connector color alone be used to select the mating part?
No. The part number, interface dimensions and coding must be checked. This is particularly relevant here because the common connector's coding annotations are inconsistent.
Q3: Does the cable support every camera using a FAKRA connection?
Compatibility cannot be established from the connector family alone. The camera interface, signal requirements and complete cable specification must match the project.
Q4: What is needed before specifying IP67 Waterproof for this assembly?
A confirmed rating or validation covering the assembled cable and its intended mating connections is needed. The supplied images do not provide that evidence.
Q5: What should be included in an OEM quotation request?
Provide the selected version, mating connector details, cable length and tolerance, routing drawing, environmental requirements, inspection criteria and order quantity. This gives Premier Cable a defined basis for prototype and production quotations.
Hot Tags: ip67 waterproof fakra cable, China ip67 waterproof fakra cable manufacturers, suppliers, factory
