Product Specifications
| Item | Specification |
| Compliance | RoHS |
| Conductor | Tinned copper |
| Cable Type | Twisted pair, fully shielded |
| Use Environment | In vehicle electronic equipment |
| Brand | TE Connectivity, MATEnet and H-MTD series |
| Data Rate | 1 Gbps gigabit, backwards compatible with 100 Mbps |
| Cable | LEONI Dacar 647-4, gigabit shielded automotive Ethernet |
| Length Options | 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 4 m, 5 m, custom on request |
| Main Connector | MATEnet 6 port A coded female, black housing, 2333538-1 |
| Product Type | MATEnet 6 port A coded female gigabit Ethernet fan out harness |
| Config 3 | 6 port A coded female to 6 port A coded female, 2333538-1 both ends, black |
| Config 2 | 6 port A coded female to 6x MATEnet single port Z coded male, 2302461-9, water blue |
| Config 1 | 6 port A coded female to 6x MATEnet single port Z coded female, 2302510-9, water blue |
| Config 5 | 6 port A coded female to 6x H-MTD single port Z coded male, E6S10A-1BZZ5-Z, water blue |
| Config 4 | 6 port A coded female to 6x H-MTD single port Z coded female, E6K10A-1BZZ5-Z, water blue |
Available Configurations
6 Port A Coded to 6x MATEnet Single Port Z Coded
The 6 port A coded female end plugs into a MATEnet 6 port A coded male pigtail, and the cable fans out to six MATEnet single port Z coded female receptacles, part number 2302510-9, water blue.
Use it when the six gigabit channels need to reach six separate MATEnet single port female devices, such as six cameras or six radar sensors. Each single port female accepts a standard MATEnet male pigtail. The 0.5 m to 5 m length range covers dashboard to sensor and trunk routing.
6 Port A Coded to 6x MATEnet Single Port Z Coded
The 6 port A coded female end plugs into a MATEnet 6 port A coded male pigtail, and the cable fans out to six MATEnet single port Z coded male plugs, part number 2302461-9, water blue.
Use it when the six devices on the other end have MATEnet female sockets, such as six female ended cameras or test jigs. Each single port male plugs directly into a female socket without an adapter. The 0.5 m to 5 m lengths cover sensor to ECU and bench test routing.
6 Port A Coded to 6 Port A Coded
Both ends are the MATEnet 6 port A coded female, part number 2333538-1, black housing.
Use it as a 6 port to 6 port extension when a factory MATEnet 6 port A coded male pigtail is too short, or when bridging two 6 port A coded male panel receptacles. The female to female gender keeps both factory pigtails unchanged, and the Dacar 647-4 shielded cable keeps all six gigabit channels clean. The 0.5 m to 5 m range covers tight ECU jumps to full trunk runs.
6 Port A Coded to 6x H-MTD Single Port Z Coded
The MATEnet 6 port A coded female end plugs into the factory MATEnet 6 port A coded pigtail, and the cable fans out to six Rosenberger H-MTD single port Z coded female receptacles, part number E6K10A-1BZZ5-Z, water blue.
Use it when the ECU side uses MATEnet A coded but the six devices use H-MTD. Each H-MTD female accepts a standard H-MTD male sensor pigtail. This is the MATEnet to H-MTD crossover, and the 0.5 m to 5 m range covers everything from a tight dashboard jump to a trunk to cabin run.
6 Port A Coded to 6x H-MTD Single Port Z Coded
The MATEnet 6 port A coded female end plugs into the factory MATEnet 6 port A coded pigtail, and the cable fans out to six Rosenberger H-MTD single port Z coded male plugs, part number E6S10A-1BZZ5-Z, water blue.
Use it when the six devices on the H-MTD side have female sockets, such as six female ended H-MTD cameras or test instruments. Each H-MTD male plugs directly into the female socket. The 0.5 m to 5 m lengths cover sensor to ECU and bench test routing.
Applications
| Application | How It Is Used | What It Enables |
| Sensor aggregation | Bring six Ethernet cameras together to one zonal ECU. | One certified harness instead of six loose jumpers. |
| Bench test rig | Wire MATEnet 6 port A coded ECUs to six single port test instruments. | Repeatable gigabit test links instead of six hand built cables. |
| 6 port to 6 port extension | Extend a factory MATEnet 6 port A coded pigtail with a female to female jumper. | Reaches a relocated ECU without cutting the factory harness. |
| MATEnet to H-MTD crossover | Adapt a MATEnet 6 port A coded to six H-MTD devices. | Mix MATEnet ECUs with H-MTD sensors without a separate adapter. |
| Zonal controller fan out | Break the MATEnet 6 port A coded female out to six single port sensors. | Six gigabit channels reach six cameras or radar units from one ECU port. |
Closing line: because all six channels run through factory terminated MATEnet or H-MTD connectors on the same shielded Dacar 647-4 cable, the gigabit links stay impedance matched end to end.
Professional Services
Connector customization: other MATEnet and H-MTD variants quoted on request.
Fast sampling: small batch samples in days, production volumes on a confirmed lead time.
Length customization: 0.5 m to 5 m in stock. Non standard cut lengths built to your drawing.
Customization: 5 fan out options as shown. Other MATEnet and H-MTD gender and coding combinations quoted on request.
Quality before dispatch: 100 percent per channel continuity and shielding continuity tested on every assembly before dispatch.
OEM and bulk support: zonal ECU developers, ADAS integrators and R and D labs get volume pricing and private label packaging.
Product FAQ
Q1: Which length should I order?
0.5 m to 1 m for bench or tight ECU jumps, 2 m to 3 m for dashboard routing, 4 m to 5 m for trunk or across cabin runs. When in doubt, take the next length up.
Q2: Can you make custom lengths or fan out combinations?
Yes. We support custom lengths from 0.5 m to 5 m and beyond, and can mix MATEnet and H-MTD gender and coding combinations on request. Send us your connector photos and target length, and we will quote the matching assembly.
Q3: What is the difference between this A coded version and the Z coded version?
The A coded version uses a black 6 port housing, part number 2333538-1, and it is keyed so it cannot mate to a Z coded receptacle. The Z coded version uses a water blue housing, part number 2333538-9. Pick the coding that matches the port on your ECU.
Q4: Is this a genuine TE MATEnet connector?
Yes. The 6 port A coded female housing is genuine TE MATEnet, part number 2333538-1, black housing. The cable is original LEONI Dacar 647-4 fully shielded gigabit automotive Ethernet. The fan out ends are genuine TE MATEnet or Rosenberger H-MTD connectors as listed.
Hot Tags: te matenet 6 port to leoni dacar gigabit automotive cable, China te matenet 6 port to leoni dacar gigabit automotive cable manufacturers, suppliers, factory
