Product Specifications
| Parameter | Specification |
| Characteristic Impedance | 90Ω |
| Cable Outer Diameter | 4.6mm |
| Brand | Hirose |
| Axial Pull Strength | ≥110 N |
| Frequency Range | 480 MHz |
| Insulation Resistance | 100 MΩ Min |
| Insertion and Extraction Durability | ≥25 cycles |
| Drawing Number | PCM-ZC-0257 |
| Housing | GT17HS-4S-HU |
| Operating Temperature | -40 to 105°C |
| Withstand Voltage | 500 V RMS Min |
| Connector 2 | GT17H-4S-2C(A) |
| Ground Connection | Shell to Shell |
| Connector 1 | USB 2.0 Type A Male |
| Cable Type | USB 2.0 Shielded Cable |
| Wire Construction | USB2.0 (26#/1P+AM)+24#/2C+AB |
| Pin Connection | Pin 1 to Pin 1, Pin 2 to Pin 2, Pin 3 to Pin 3, Pin 4 to Pin 4 |
Features and Connector Design

USB Host Interface and GT17H Connection
One end features a standard USB 2.0 Type A Male plug, while the opposite end incorporates the Hirose GT17H-4S-2C(A) Connector. This interface combination provides a dedicated connection between USB equipped host systems and electronic devices designed with the corresponding GT17H interface. The connector arrangement is intended for applications requiring a defined 4 pin connection rather than a conventional USB plug at both ends.
Original Hirose Connector and Housing Configuration
The GT17H-4S-2C(A) Connector is assembled with the GT17HS-4S-HU Shell, maintaining the specified connector and housing combination shown in the engineering drawing. The housing supports the connector assembly and provides a defined mating structure for equipment integration. Using the specified component references helps maintain compatibility with the intended interface and simplifies identification during procurement, assembly and replacement.


Dedicated Cable Construction and Shielding
The cable follows the construction specified in the drawing: USB2.0 (26#/1P+AM)+24#/2C+AB OD4.6MM. Its defined conductor arrangement combines the specified signal pair and additional core conductors within an overall shielded cable structure. This configuration is designed for USB 2.0 signal transmission while providing a controlled cable construction for equipment interconnection. The finished cable has a nominal outer diameter of 4.6mm.
Defined Pin Assignment and Electrical Performance
The wiring follows the drawing's pin to pin assignment, with Pin 1 connected to Pin 1, Pin 2 to Pin 2, Pin 3 to Pin 3 and Pin 4 to Pin 4. The cable also maintains shell to shell grounding. Specified electrical characteristics include 90Ω characteristic impedance, a 480 MHz frequency range, 100 MΩ minimum insulation resistance and 500 V RMS minimum withstand voltage, supporting the electrical requirements defined for this assembly.

Applications and Customization Capabilities
USB Equipment Interconnection
Designed to connect USB 2.0 Type A host interfaces with equipment featuring the Hirose GT17H 4 pin connection, providing a dedicated cable solution for electronic systems with specific connector requirements.
Customized Cable Manufacturing
Premier Cable can support project specific cable assembly requirements, including cable length, connector configuration, wire construction and assembly details, subject to technical evaluation and drawing confirmation.
Embedded Electronic Systems
Suitable for equipment integration where a standard USB interface must be adapted to a compact, dedicated connector configuration. The defined pin assignment and shell grounding help maintain the intended connection arrangement.
Product Drawing

Product FAQ
How is the cable wired between the two connectors ?
The four corresponding pins are connected directly from Pin 1 to Pin 1 through Pin 4 to Pin 4. The drawing also specifies shell to shell grounding.
Which original Hirose components are specified ?
The engineering drawing identifies the GT17H-4S-2C(A) Connector and GT17HS-4S-HU Shell as the specified components for the GT17H connection.
What interfaces are used in this USB 2.0 cable assembly ?
The assembly connects a USB 2.0 Type A Male plug to a Hirose GT17H-4S-2C(A) Connector, providing a dedicated connection for compatible electronic equipment.
What are the main electrical characteristics of this cable ?
The specified characteristics include 90Ω impedance, a 480 MHz frequency range, 100 MΩ minimum insulation resistance and 500 V RMS minimum withstand voltage.
Can the cable length and assembly details be customized ?
Yes. Cable length and assembly details can be evaluated according to project requirements, with the final dimensions and configuration confirmed through an approved engineering drawing.
Hot Tags: usb 2.0 hirose gt17h 4 pin cable, China usb 2.0 hirose gt17h 4 pin cable manufacturers, suppliers, factory

